• Textile Coloration and Finishing
• /
• v.14 no.4
• /
• pp.223-228
• /
• 2002

Cotton fabric was treated with $TiO_2$-PEG600 dispersion colloid by pad-dry-cure and wet-fixation process to improve the performance properties as well as UV-cut effect. As the concentration of $TiO_2$/PEG increased tensile strength, crease resistance, stiffness of treated cotton fabric increased. Application of wet-fixation method provided a further improvement in tensile strength, crease resistance, stiffness of treated cotton fabric. Cotton fabric treated with $TiO_2$/PEG was more efficient in UV-cut property than untreated cotton.

• Journal of the Korea Convergence Society
• /
• v.12 no.7
• /
• pp.125-131
• /
• 2021

Blue light with strong energy is required for light-curing resin treatment, which is being used more frequently in dentistry. To reduce the risk of exposure to scattered light, we tried to use colored lenses. The tips for light curing machine and a commercially available yellow-type blue-light blocking lens and a yellow lens colored with yellow dye, which are expected to be effective in blocking blue light, were placed in a UV-Vis spectrometer device, and transmission and blocking of blue light were tested respectively. As a result, the average blue light blocking rate of the light curing machine tips was 99.49%, and the C lens with the highest color density among commercially available lenses showed a high blue light blocking rate of 99.54%. In the case of lenses tinted with yellow, the yellow tinted C lens with the highest tint concentration showed 87.57% of blue light blocking rate. It is judged that the side effects related to the eyes caused by blue light can be reduced if a yellow-type commercially available or colored lens is worn along with a light curing machine tip during resin treatment.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.41 no.6
• /
• pp.20-28
• /
• 2013

The purpose of this study was to compare the ultra-violet(UV) radiation under the landscaping shade facilities and tree with natural solar UV of the outdoor space at summer middays. The UVA+B and UVB were recorded every minute from the $20^{th}$ of June to the $26^{th}$ of September 2012 at a height of 1.1m above in the four different shading conditions, with fours same measuring system consisting of two couple of analog UVA+B sensor(220~370nm, Genicom's GUVA-T21GH) and UVB sensor(220~320nm, Genicom's GUVA-T21GH) and data acquisition systems(Comfile Tech.'s Moacon). Four different shading conditions were under an wooden shelter($W4.2m{\times}L4.2m{\times}H2.5m$), a polyester membrane structure ($W4.9m{\times}L4.9m{\times}H2.6m$), a Salix koreensis($H11{\times}B30$), and a brick-paved plot without any shading material. Based on the 648 records of 17 sunny days, the time serial difference of natural solar UVA+B and UVB for midday periods were analysed and compared, and statistical analysis about the difference between the four shading conditions was done based on the 2,052 records of daytime period from 10 A.M. to 4 P.M.. The major findings were as follows; 1. The average UVA+B under the wooden shelter, the membrane and the tree were $39{\mu}W/cm^2$(3.4%), $74{\mu}W/cm^2$(6.4%), $87{\mu}W/cm^2$(7.6%) respectively, while the solar UVA+B was $1.148{\mu}W/cm^2$. Which means those facilities and tree screened at least 93% of solar UV+B. 2. The average UVB under the wooden shelter, the membrane and the tree were $12{\mu}W/cm^2$(5.8%), $26{\mu}W/cm^2$(13%), $17{\mu}W/cm^2$(8.2%) respectively, while the solar UVB was $207{\mu}W/cm^2$. The membrane showed the highest level and the wooden shelter lowest. 3. According to the results of time serial analysis, the difference between the three shaded conditions around noon was very small, but the differences of early morning and late afternoon were apparently big. Which seems caused by the matter of the formal and structural characteristics of the shading facilities and tree, not by the shading materials itself. In summary, the performance of the four landscaping shade facilities and tree were very good at screening the solar UV at outdoor of summer middays, but poor at screening the lateral UV during early morning and late afternoon. Therefore, it can be apparently said that the more delicate design of shading facilities and big tree or forest to block the additional lateral UV, the more effective in conditioning the outdoor space reducing the useless or even harmful radiation for human activities.

• Journal of the Korea Convergence Society
• /
• v.10 no.12
• /
• pp.177-181
• /
• 2019

The purpose of this study was to investigate the degree of blocking of blue light of the tips and goggles of the curing light during the dental treatment using the blue light of the light curing. The light curing tips and goggles were placed on a UV-Vis spectrometer and the results of light transmission were analyzed. Comparative analysis. As a result, all four types of light curing tips used in the analysis showed excellent blue light blocking effect. In the case of safety goggles, red-type goggles showed blue light transmittance similar to those of light curing than yellow-type goggles. As a result, it is recommended that the attachment of the light curing with high degree of blue light blocking and the wearing of safety glasses are necessary to protect the eyes. This behavior is thought to reduce persistent irritation and fatigue in the eyes.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.4 s.37
• /
• pp.275-280
• /
• 2005

We propose a new approach to greatly simplify the fabrication of conventional nanoimprint lithography (NIL) by combined nanoimprint and photolithography (CNP). We introduce a hybrid mask mold (HMM) made from UV transparent material with a UV-blocking Cr metal layer placed on top of the mold protrusions. We used a negative tone photo resist (PR) with higher selectivity to substrate the CNP process instead of the UV curable monomer and thermal plastic polymer that has been commonly used in NIL. Self-assembled monolayer (SAM) on HMM plays a reliable role for pattern transfer when the HMM is separated from the transfer layer. Hydrophilic $SiO_2$ thin film was deposited on all parts of the HMM, which improved the formation of SAM. This $SiO_2$ film made a sub-10nm formation without any pattern damage. In the CNP technique with HMM, the 'residual layer' of the PR was chemically removed by the conventional developing process. Thus, it was possible to simplify the process by eliminating the dry etching process, which was essential in the conventional NIL method.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.6
• /
• pp.833-839
• /
• 2003

Quantitaties of flavonoids were determined by HPLC in three different ethanol extract (50, 70 and 95%, v/v) from Korean cherry. Antimicrobial activity of the ethanol extract and its solvent fraction (ethyl acetate and n-butanol fractions) against Staphylococcus aureus (ATCC 6538) and Staphylococcus epidermidis (ATCC 12228) was evaluated using MIC and disk test. Additionally, UV protective effect was also determined. The highest flavonoid quantity was found in 70% ethanol extract of Korean cherry. The quantities of quercitrin were 12.7 mg% and 2.1 mg% in ethyl acetate fraction and in buthanol fraction, respectively. In addition, the flavonoid in 70% (v/v) ethanol extract of Korean cherry included 14.9 mg% of quercitrin, 6.0 mg% of tannic acid and 5.2 mg% of catechin. Therefore, it was confirmed that main flavonoid of Korean cherry was quercitrin. For antimicrobial activity of ethanol extract of Korean cherry against Staphylococcus aureus (ATCC 6538) and Staphylococcus epidemidis (ATCC 12228), MIC and disk test using ethyl acetate fraction and butanol fraction were carried out. As a result, ethyl acetate fraction with higher quantity of flavonoid showed higher antimicrobial activity. Therefore, it was confirmed that the higher antimicrobial activity was brought about by flavonoid in Korean cherry. For UV protective effect of Korean cherry, ethanol extract showed the absorption zone of ultraviolet rays in 210∼380 nm including 290∼320 nm that is the wave length of UV-B harmful to the skin of human body. The pattern is the same as the absorption zone of 220∼300 nm in catechin and 210∼400 nm in quercitrin. Then, the functionalities of catechin and quercitrin were anticipated. It is expected that quercitrin in Korean cherry has the antimicrobial effect and UV protective effect related to the skin.

• Journal of Korean Ophthalmic Optics Society
• /
• v.9 no.1
• /
• pp.125-134
• /
• 2004

By applying the test methods of "Protection Eyewear Standard (KS P 8147)", "Glasses Frame Standard (KS G 3306)" and "Lens Standard for Sunglasses (KS P 4404)", this study analyzed optical functions of sunglasses now being sold in a road shop (A shop), a fashion goods store (B shop), a shop of highway rest area (C shop) and an optical shop (D shop). When compared with sunglasses (UV transmittance rate 8.8%) of a road shop, UV Block effects of sunglasses (UV transmittance rate 0.7%) of an optical shop showed good results. In addition, the average surface resistance against abrasion for sunglasses which was sold at an optical shop was 1.4% that was much higher than that of sunglasses of a road shop(2.2%).

• Applied Chemistry for Engineering
• /
• v.24 no.4
• /
• pp.391-395
• /
• 2013

In this study, zinc oxide (ZnO) nano powder, well known as an UV absorbing material, was synthesized with three synthetic conditions by the hydrothermal method. After ZnO nano powder was surface-modified with various silane coupling agents to improve dispersion property, a dispersion sol was prepared with dispersant for 72 h by the ball-milling of surface-modified ZnO nano powder. The dispersion sol, prepared by modifying the surface of the ZnO nano powder with an average size of about 30 nm using 3-chloropropyl trimethoxy silane, showed an excellent dispersion stability with a high UV-shielding and visible trnasparency.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.4
• /
• pp.922-930
• /
• 2021

This study was attempted to investigate the availability of nipa palm (Nypa fruticans Wurmb.) and finger root (Boesenbergia pandurata) extracts as natural cosmetic ingredients. For this, O/W cosmetic formulations with different compositions were prepared. The appearance of the cosmetic formulations was compared, and brightness and color values were measured using a colorimeter. Also, the pH, viscosity, and texture of the cosmetic formulations with different compositions were measured, and the effects of the extracts on the properties of the cosmetic formulations were examined. Finally, the UV transmittance and sun protection factor (SPF) index were observed, and the results confirmed the availability of finger root extract as a natural ingredient for UV protection.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.50 no.6
• /
• pp.714-720
• /
• 2017

Exposure to ultraviolet (UV) radiation is associated with the development of adverse effects in skin. Among the three types of UV rays, UV-B causes the most damaging effects, inducing sunburn and penetrating the outer skin, resulting in DNA mutations and skin cancer. The objective of this study was to formulate a UV-protective film by incorporating Ecklonia cava extracts. Cells covered with the film were exposed to UV-B (50, 80, and $100mJ/cm^2$). To determine the protective effects of the film, we evaluated cell viability, intracellular ROS generation, and apoptosis. We found that all E. cava extracts absorbed UV light and exhibited protective effects against UV-B-induced photodamage. Among the protective films examined in this study, that incorporating an E. cava 70% ethanol extract (70EX) formed the most effective protection against UV-B in HaCaT cells. These findings suggest that the application of film containing E. cava extract could prevent UV-B-induced photodamage, and offer protection against the detrimental effects of UV radiation, thus maintaining physiological condition.