• Ocean and Polar Research
• /
• 제23권4호
• /
• pp.389-394
• /
• 2001

During austral summer 1998 we examined the impacts of artificial UV-B and solar radiation on chlorophyll a content and fresh weight of four species of Antarctic red algae namely, Georgiella confluens, Iridaea cordata, Pantoneura plocamioides and Porphyra endiviifolium. These subject species were taken in consideration of clear demarcations of their vertical distribution and classified as shallow water group (Iridaea and Porphyra) and deep water group (Georgiella and Pantoneura). When irradiated with artificial UV-B at the irradiance of $2.0Wm^{-2}$ the shallow water inhabitants were much more resistant than the algae from deep water the fresh weight of which was reduced by 40-50% relative to control apart from loss of pigmentation. Direct solar radiation was lethal to the deep water group with a sign of complete bleaching whereas the shallow water group did not show any change in the physiological parameters. We were unable to discriminate difference in the algal sensitivity between UV-filtered and UV-transparent treatments since samples tested were either all unaffected or dead. Spectrophotometric measurements of methanolic extracts revealed a strong absorption peak in the UV range in the shallow water group of algae, Iridaea and Porphyra, but not in the deep water counterparts. Species difference in sensitivity to artificial UV-B and solar radiation is discussed in relation to biochemical and morphological characteristics and the role of the radiation in the algal vertical distribution is suggested from ecological perspective.

• 한국환경농학회지
• /
• 제16권3호
• /
• pp.227-232
• /
• 1997

UV-B 조사에 의한 오이의 생장 및 생리 기능에 미치는 영향을 조사하기 위하여 비료처리에 의한 오이 제1 엽의 UV-B의 영향을 조사하였다. UV-B 조사에 의한 가시장해는 처리 1주일부터 나타났으나 생장 저해 현상은 볼 수 없었다. 그러나 UV-B 조사에 의한 생장 저해 현상은 비료 첨가에 의해 나타났으며 가장 큰 저해 효과는 질소 시용에 의해 나타났다. 이 결과는 UV-B가 질소대사에 관여하고 있음을 시사한다. 따라서 질소대사에 관여하고 있는 주 효소인 질산 환원효소 활성을 조사한 결과 UV-B 조사 7일째에 비료 처리구에서 현저히 증가하는 경향을 나타냈다. 또한 UV-B 조사에 의한 엽면적의 생장감소는 세포의 신장, 분열 생장에 관여하고 있는 식물호르몬 활성에 영향을 미치는 것으로 보여 오이의 제 1엽에서의 BA 처리에 의한 사이토카이닌의 감수성을 조사했다. UV-B 조사에 의한 사이토카이닌의 감수성은 UV-B를 조사하지 않은 구에 비해 억제되었다. 이 결과에 의해 UV-B 조사가 식물 생장에 관여하고 있는 사이토카이닌의 활성을 억제시켜 엽면적의 감소가 발생된 것으로 생각되었다.

• Asian Journal of Atmospheric Environment
• /
• 제5권2호
• /
• pp.79-85
• /
• 2011

The purpose of this study is to evaluate the strength of the near-UV wavelength of 380 nm relative to visible and near-IR bands, and to find the suitable wavelength for detecting aerosols by using the Global Imager (GLI) sensor aboard the Advanced Earth Observing Satellite-II (ADEOS-II). Sensitivity analysis is performed for the retrieval of biomass burning aerosols by employing the radiative transfer model Rstar5b. It is determined that background surface reflectance in the blue band is similar to that in the near-UV band, and that wavelengths in the blue bands are more sensitive to the Aerosol Optical Thickness (AOT) than wavelengths in the near-UV band. The Total Ozone Mapping Spectrometer (TOMS) Aerosol Index (AI) is used in the indirect method used for aerosol retrieval, and the wavelength pair 380 nm and 460 nm is determined to be the most sensitive to the AOT. The results of this study suggest that wavelengths in the blue bands are suitable for detecting biomass burning aerosols over the Korean peninsula.

• 조명전기설비학회논문지
• /
• 제26권4호
• /
• pp.35-40
• /
• 2012

In this study, the ultraviolet (UV) intensity of polymer insulator was measured using the Anti-Reflective (AR) coating lens on the occurrence of corona discharge. The UV intensity was compared before and after the AR coating. Under the 200-260[nm] of UV lens, the reflection rate before AR coating was 7.5~5.5[%] with 85-89[%] of transmission rate. After AR coating, however, the reflection rate decreased to 1.3~1.22[%] with improved transmission (97.4~97.6[%]). Then, the UV intensity by distance was measured in the polymer insulator. According to the measurement, the UV intensity increased 6.5 times at 37.5[%] of Vm/Vbd with 5[m] of distance. As distance increased, the growth rate declined. As high voltage increased, in addition, AR coating was less effective due to the count error caused by the UV sensor pulse signal overlap. Therefore, it appears that it would be more effective to detect corona discharge with 5[m] or less of distance at diagnosis of power facilities by AR coating and UV sensor sensitivity.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.234-234
• /
• 2008

Chemically homogeneous $Ba_{0.6}Sr_{0.4}TiO_3$ (BST) sols were synthesized using barium acetate, strontium acetate, and titanium isoproxide as starting materials. BST thin films of thickness 340 nm were deposited on Pt/$TiO_2/SiO_2$/Si and alumina substrates using spin coating method. The technique used for the processing of these films was Ultraviolet (UV) sol-gel photoannealing, using phto-sensitivity precursor solutions and UV-assisted rapid thermal processing(UV-RTP). The crystallization behaviour of the BST sols and thin films was studied by differential thermal analysis (DTA) and X-ray diffraction (XRD). Variation of permittivity and dielectric loss were measured in LCR-meter, model HP 4394A.

• 분석과학
• /
• 제5권3호
• /
• pp.339-343
• /
• 1992

HPLC-UV방법을 이용하여 밀전분 지방질의 주성분인 LPC를 정량하기 위해 HRW 밀전분 지방질로부터 순수한 LPC를 분리하여 LPC의 표준곡선을 작성하였다. 밀 품종별 LPC에서 대한 HPLC peak responses는 시료간 큰 차이를 보여주지 않아 HRW 밀전분 지방질로부터 만든 LPC의 HPLC-UV 표준곡선은 밀전분 지방질에 함유되어 있는 LPC의 함량을 신속하고 정확하게 정량하는 데 이용할 수 있음을 보여 주었다.

• 센서학회지
• /
• 제16권4호
• /
• pp.254-258
• /
• 2007

A novel cure sensor based on the side-polished single mode fiber has been proposed and demonstrated. Two different UV curable epoxies were used to verify the feasibility of the side-polished single mode fiber as a high sensitivity cure sensor. The volume change of the epoxy by UV curing results in a corresponding change of the refractive index. The sensor can be used to monitor the curing process, the refractive index variation and the volume change of epoxy in real time during the UV curing process. In addition, small birefringence of the epoxy film can be detected using the sensor.

• Fibers and Polymers
• /
• 제6권2호
• /
• pp.127-130
• /
• 2005

Intrinsic UV reflection and fluorescence behaviors of polycarbonate, polyurethane and poly(ethylene terephthalate) films were investigated in order to characterize the interaction of water in these films. During water sorption process, UV reflection spectra of polycarbonate and polyurethane films showed little peak position changes. Fluorescence emission spectra of polycarbonate films showed red spectral shifts from 332 nm with water immersion time. This red-shifted peak could be due to phenyl-2-phenoxybenzoate, which is one of the major thermal degradation products in polycarbonate. Fluorescence peaks of polyurethane films appeared at two different positions and the ratio of these peak intensities increased with increasing immersion time. In the case of PET films, the UV reflection spectrum showed the peak intensity around 340 nm to change in response to water sorption. The fluorescence near 388 nm probably due to ground state dimer exhibited sensitivity with water sorption, when excited at 340 nm.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 1997년도 International Symposium on Fire Science and Technology
• /
• pp.590-597
• /
• 1997

In this work, a new type of UV flame detection system was developed. In order to measure the performance of UV flame detector, various kinds of experiments was performed. The results show that the maximum response time of the UV flame detector is 0.2 seconds when the detection distance is one meter The advantages of this system include wide area, high speed response and high sensitivity. After testing the W flame detector in engine compartment it detected fire within 0.09 seconds and extinguished within 5 seconds. Hence, the UV flame detector can be applied in automatic fire suppression system for automobiles.

• Macromolecular Research
• /
• 제9권6호
• /
• pp.327-331
• /
• 2001

A new soluble photosensitive poly(amide-co-imide) containing p-phenylenediacryloyl moiety was synthesized and its photoreactivity was characterized. The copolymer was synthesized fromp-phenylenediacryloyl chloride, 4,4-(hexafluoroisopropylidene)diphthalic anhydride and two equivalents of bis(4-aminophenyl) ether in NMP with a subsequent chemical imidization of the resulting poly[amide$\xi$ο-(amic acid)] by acetic anhydride and pyridine. The structure and thermal properties of the polymer were characterized by spectroscopic methods and thermal analyses. The polymer was stable up to 350$\^{C}$, showed good solubility in polar aprotic solvents, and became insoluble after UV irradiation due to the[2+2] cycloaddition of phenylenediacryloyl moiety. Photoreactivity of the polymer was investigated in solution or as a film with respect to the various exposure conditions by UV/Vis spectroscopy. The photosensitivity was noticeably increased with the irradiation temperature, especially in the presense of photosensitizer. The reason for the increased sensitivity was speculated based on the flexibilization of main chain at elevated temperature. Exposure characteristic curves were obtained from the gel fraction experiments after UV irradiation. The sensitivity and contrast at 160$\^{C}$ were measured to be 293 mJ/㎠ and 1.64, respectively.