• Journal of the Korean Ceramic Society
• /
• v.43 no.3 s.286
• /
• pp.185-192
• /
• 2006

The effects of annealing on structural and electrical properties of ITO/PES (Indium Tin Oxide/Polyethersulfone) films was investigated. Amorphous ITO thin films were grown on plastic substrates, PES using low temperature DC magnetron sputtering. Various post annealing techniques were attempted to research variations of microstructure and electrical properties: i) conventional thermal annealing, ii) excimer laser annealing, iii) UV irradiation. The electrical properties were obtained using Hall effect measurements and DC 4-point resistance measurement. The microstructural features were characterized by FESEM, XRD, Raman spectroscopy in terms of morphology and crystallinity. Optimized UV treatment exhibits the enhanced conductivity and crystallinity, compared to those of conventional thermal annealing.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.05a
• /
• pp.210-213
• /
• 2004

We synthesized photoalignment material of high thermal resistance with hydroxyl aromatic polyimide, and studied the liquid crystal (LC) aligning capabilities on the photopolymer layers. Also, electro-optical (EO) performances for the twisted-nematic (TN)-liquid crystal display (LCD) photoaligned with linearly polarized UV exposure were investigated. A good LC alignment with UV exposure on the photopolymer surface can be obtained. However, the low pretilt angles were obtained below $1^{\circ}$. The Voltage-transmittance (V-T) curve without backflow bounce in the photoaligned TN cell with UV exposure was observed. The response time of photoaligned TN cell was measured about 24 ms. Finally, The photoaligned TN cell has few hysteresis, and shows the residual DC voltage that is less.

• Journal of Animal Reproduction and Biotechnology
• /
• v.34 no.1
• /
• pp.20-29
• /
• 2019

Soy isoflavones have been reported to possess many physiological activities such as antioxidant activity and inhibition of cancer cell proliferation. This study investigated the photoprotective effects of soybean extract in human fibroblast cell line and hairless mice model. Human fibroblast was treated with soybean extract before and after ultraviolet B (UVB; 290-302 nm) irradiation. In the soybean extract treated group, the cells showed better resistance to ultraviolet (UV) than control group. The amount of type I collagen recovered from the soybean treated group was higher than the vehicle group exposed to UV-induced damage. Moreover, increased expression of metalloproteinases-1 as a result of UV irradiation was suppressed by the soybean extract. Female mice were orally administered soybean extract and irradiated with UVB light for 8 weeks. The effects of the soybean extract on the skin appearance, collagen deposition and epidermal thickness in the UV-damaged mouse skin were analyzed using histopathological methods. In soybean extract treated group, the skin had a better morphology than that of the control group. Furthermore, the amount of type I collagen was increased and overexpression of MMP-1 was reduced in the soybean extract group compared to vehicle group. Additionally, up-regulation of pro-inflammatory cytokines induced by UV irradiation was suppressed by dietary soybean extract treatment. It appears that soybean extract had a photoprotective effect, including anti-aging and anti-inflammatory effect, from UV-induced damage in not only human fibroblast, but also hairless mice. We confirmed that these effects were possibly due to promotion of collagen synthesis and inhibition of MMP-1 expression.

• Korean Journal of Microbiology
• /
• v.26 no.2
• /
• pp.113-121
• /
• 1988

Ozone, an atmospheric pollutant, can damage similar UV and X-rays DNA and its components. It is possible then that the KNA damage produced by this gas are similar, to some extent, to those of radiations and that they could be repaired by the same DNA repair mechanisms. It has been observed in Escherichia coli that radiosensitive strains such as lex A, rec A and pol A, all deficient to some extent for DNA repair, are more sensitive to ozone than a wild type strain. We have thendetermined the ozone resistance and host-cell reactivation of ozone-damaged T3 phages for the E. coli double mutants pol A, lex A, uvr B, lex A, uvr A, rec A and rec A lox A. According to the results, the DNA polymerase 1 plays a key role in ozone resistance and Type 11 mechanism and/or shory patch excision repair are the most important for it. The interactions between the different DNA repair mechanisms are secondary. There is a strong correlation between ozone resistance and the capacity to reactivate T3 phages damaged by ozone.

• Proceedings of the KIEE Conference
• /
• 1997.07e
• /
• pp.1813-1815
• /
• 1997

In this study, in order to develop outdoor insulating materials, SIN(simultaneous interpenetrating polymer network) was introduced to Epoxy resin and the environment resistance was investigated. Six kinds of specimen were manufacture by filler($SiO_2$) content. SEM was untilized in order to confirm their network structure changes. Also, tracking test, UV test and acid rain test were carried out investigate the environment resistance characteristic. Therefore it was confirmed that simultaneous interpenetrating polymer network specimens were more excellent than single network structure specimens. But, acid rain almost never changed resistance.

• Korean Journal of Microbiology
• /
• v.28 no.2
• /
• pp.109-113
• /
• 1990

The mutagenesis-enhancing plasmid pKM101 and its mutant pSL4 were introduced into Escherichia coli B/r strains possessing different DNA repair capacities ($phr^{-}, recA^{-}, uvrA^{-}, uvrB^{-}$) and determined the protection effect and mutagenecity for UV and MNNG. The mutability and protection effect of plasmid pKM101 and pSL4 were affected by different DNA repair capacity. The mutagenecity and resistance of two plasmids were increased against UV and MNNG, and plasmid pSL4 had a higher effect than pKM101. We suggest that the functional differences between pKM101 and pSL4 is due to the variety of mutator gene.

• Applied Chemistry for Engineering
• /
• v.16 no.1
• /
• pp.101-106
• /
• 2005

Photocurable modified 6 functional polyacrylate(PA-1) were prepared from dipentaerythritol derivatives (DPET) and acrylic acid, and 12 functional polymethacrylate(PA-2) were prepared from dipentaerythritol derivatives (DPET), trimellitic anhydride, and glycidyl methacrylate. And physical properties of photocurable modified poly(meth)acrylate were increased with increasing functionality of (meth)acrylate. Thermal stability of UV cured film obtained by using TGA was shifted to higher temperature as the increasing of functionality. Hardness, abrasion resistance and tensile strength of UV cured film were increased with increasing functionality of (meth)acrylate. Values of yellow index were increased with increasing functionality of (meth)acrylate.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.5
• /
• pp.471-481
• /
• 2021

This study investigated the hygroscopicity and UV deterioration characteristics of 3 domestic and 4 imported woods using natural oil, stain, and varnish paints. In terms of hygroscopicity, it was found that the hygroscopicity of the painted wood was lower than that of the unpainted wood, and that as the number of coatings increased, the hygroscopicity decreased. In terms of anti-absorption, oil-based chemical paints showed higher resistance than water-based paints, and natural oils showed results comparable to oil-based paints. As for the UV deterioration, the amount of color change of the painted wood was lower than that of the unpainted wood, and there was no significant difference according to the number of times of painting. The amount of color change was found to be low in oil-based paints and hardwoods. Through this study, we confirmed effective moisture blocking and small color changes during painting using paints, and it is believed that wood can be protected from internal and external defects through selective and efficient painting based on data for excellent painting performance.

• Textile Coloration and Finishing
• /
• v.35 no.4
• /
• pp.231-238
• /
• 2023

Microporous gel films of 29 m were prepared by the gel drawing of UHMWPE/soybean oil blend (4:6, w/w) up to 800%. The stretched films containing the optimal photoinitiator concentration, depending on the film thickness, was cross-linked under 365 nm LED-UV irradiation and the oil was extracted with n-hexane, resulting in a gel fraction of 95 % or more. With the formation of the cross-linked structure, the melt-down temperature and melt-down elongation increased by 16 ℃ and by 63% respectively. Also the thermal stability of the crosslinked UHMWPE was proved by the area shrinkage under the heat treatment decreased to 3.8 % compared to 17.4 % for the pristine film, and by the reductions in the combustion heat. The enhanced thermal stability of the crosslinked UHMWPE microporous membranes can be used for various industrial applications such as filters, electric vehicles and energy storage systems.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.23-32
• /
• 2020

This study investigated the thermal degradation and fading behavior of PTT dyed with vat dye and its dyeing ability. The PTT sample was dyed with vat dye using an acid treatment and pad-steam method to improve the dyeing performance. This method made dye particle nanosize and allowed it to penetrate the polymer material easily. The sample dyed using the pad-steam method showed level dyeing and enhanced dyeing affinity, compared to the batch-dyeing method. The degradation behavior of PTT dyed with vat dye after each heat and UV treatment was examined with the change in tensile strength or K/S value on the sample. The tensile strength and K/S values of the sample dyed with vat dye after the heat and UV treatment decreased with increasing temperature and exposure time. Although they showed high degradation under severe conditions, its rate constant was improved compared to the samples dyed with disperse dye. Consequently, acid treatment and the pad-steam method resulted in the introduction of vat dye on PTT. In addition, the PTT dyed with vat dye showed enhanced thermal and UV resistance because of their high molecular weight and chemical structure for stable adsorption behavior.