• 한국세라믹학회지
• /
• 제45권11호
• /
• pp.651-657
• /
• 2008

In this study, CNT/$TiO_2$ composites were prepared using surface modified Multiwall carbon nanotube (MWCNT) and titanium n-butoxide (TNB) with benzene. The composites were characterized by nitrogen adsorption isotherms, scanning electron microscopy (SEM), X-ray diffraction (XRD), energy dispersive X-ray analysis (EDX), FT-IR spectra, and UV-vis absorption spectroscopy. The UV radiation induced photoactivity of the CNT/$TiO_2$ composites was tested using a fixed concentration of methylene blue (MB, $C_{16}H_{18}N_3S{\cdot}Cl{\cdot}3H_2O$) in an aqueous solution. Finally, it can be considered that the MB removal effect of the CNT/$TiO_2$ composites is not only due to the adsorption effect of MWCNT and photocatalytic degradation of $TiO_2$, but also to electron transfer between MWCNT and $TiO_2$.

• Bulletin of the Korean Chemical Society
• /
• 제30권8호
• /
• pp.1798-1804
• /
• 2009

In this study, we have studied on improved performance of carbon nanotubes/titanium (CNT/TiO2) structure electrode for methylene blue (MB). The composite electrodes consisting of CNTs and a titanium oxide matrix with phenol resin binder was fabricated with a mixture method. The chemical and morphological structure of CNT/Ti$O_2$ composites were characterized by means of BET surface area, X-ray diffraction (XRD), scanning electron microscopy (SEM), UV-Vis absorption technique, Raman spectroscopy and energy dispersive X-ray (EDX). The electrode showed a remarkably enhanced performance for MB oxidation under UV illumination with or without electro-chemical reaction (ECR). Such a remarkably improved performance of the CNT/Ti$O_2$ structure electrode might be due to the enhanced MB oxidation by electro- and photo-generated electrons and holes in the CNTs and Ti$O_2$ under UV illumination with or without ECR.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2043-2048
• /
• 2011

According to the statistical report from National Emergency Management Agency (NEMA) in Korea, the accident rate of closed switchboards in power systems occupies over 40%. In this paper, an integrated sensor module for monitoring the condition of closed switchboards is described. The sensor module monitors electro-magnetic (EM) wave, ultra-violet (UV) ray, heat and smoke generated by electrical discharges or insulation breakdown. The effective detection ranges were decided from experiment results; 100 kHz~10 MHz for EM wave, 220 nm~395 nm for UV ray and 0~$150^{\circ}C$ for heat, respectively. The prototype sensor module includes all functions above-mentioned in one device.

• 한국안전학회지
• /
• 제9권4호
• /
• pp.69-76
• /
• 1994

Low density polyethylene is widely used as an insulating material In electric power cables. It is most important to know the beginning of its aging by partial discharge and UV-ray. That Is reason which we investigate chemiluminescence of the LDPE treated by partial discharge, UV-ray and corona discharge. We find that it takes one hour on spectra of IR but 0.17 minutes on chemiluminescence in the variation of chemical by partial discharge. Also we knew that Lithium carbonate-added(1phr) LDPE offered obvious suppressing effect on aging by partial discharge through the chemiluminescence. Therefore, the chemiluminescence is a highly sensitive and effective measurement method to appreciate characteristics of the treated surface and the oxidation reaction.

• Journal of Microbiology and Biotechnology
• /
• 제23권9호
• /
• pp.1287-1292
• /
• 2013

Extracellular biogenic synthesis of silver nanoparticles with various shapes using the rice bacterial blight bacterium Xanthomonas oryzae pv. oryzae BXO8 is reported. The synthesized silver nanoparticles were characterized by UV-Vis spectroscopy, powder X-ray diffractometry (XRD), scanning electron microscopy, energy dispersive X-ray spectrometry, and high-resolution transmission electron microscopy (HR-TEM). Based on the evidence of HR-TEM, the synthesized particles were found to be spherical, with anisotropic structures such as triangles and rods, with an average size of 14.86 nm. The crystalline nature of silver nanoparticles was evident from the bright circular spots in the SAED pattern, clear lattice fringes in the high-resolution TEM images, and peaks in the XRD pattern. The FTIR spectrum showed that biomolecules containing amide and carboxylate groups are involved in the reduction and stabilization of the silver nanoparticles. Using such a biological method for the synthesis of silver nanoparticles is a simple, viable, cost-effective, and environmentally friendly process, which can be used in antimicrobial therapy.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 디스플레이 광소자분야
• /
• pp.132-136
• /
• 2004

열 증착 방법을 이용하여 copper(II)-phthalocyanine(CuPc) 박막을 glass 기판 위에 제작하였다. 열처리 조건은 $150^{\circ}C$에서 후열(annealing) 처리 하는 방식과 예열하는 두 가지 방식으로 달리하였다. 제작된 박막의 전기전도도를 평가하기 위해 마이크로웨이브 근접장 효과를 이용한 근접장 현미경(near-field scanning microwave microscope)을 이용하여 비파괴적인 방식으로 CuPc 박막의 반사계수(reflection coefficient)를 측정하였다. CuPc 박막의 전기전도도 특성을 UV 흡수도를 통한 에너지 밴드갭의 shift 현상과 관련지어 설명하고 또한 x-ray diffraction(XRD) data를 통해 박막의 결정 특성과 비교하였다. 박막 표면 특성은 SEM(scanning microscope microscopy)을 통해 관측하였다. 열처리 조건에 따른 CuPc 박막의 전기전도도 특성은 후열 처리한 박막의 경우 예열 처리한 박막보다 전기 전도 특성이 향상되었음을 관측할 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.352.2-352.2
• /
• 2014

In this present work, we report a Cu-Mn alloy as a materials for the self-forming barrier process. And we investigated diffusion barrier properties of self-formed layer on low-k dielectrics with or without UV curing treatment. Cu alloy films were directly deposited onto low-k dielectrics by co-sputtering, followed by annealing at various temperatures. X-ray diffraction revealed Cu (111), Cu (200) and Cu (220) peaks for both of Cu alloys. The self-formed layers were investigated by transmission electron microscopy. In order to compare barrier properties between Mn-based interlayer interlayer, thermal stability was measured with various low-k dielectrics. X-ray photoelectron spectroscopy analysis showed that chemical compositions of self-formed layer. The compositions of the Mn based self-formed barriers after annealing were determined by the C concentration in the dielectric layers.

• 한국산학기술학회논문지
• /
• 제5권2호
• /
• pp.186-190
• /
• 2004

Nano size 몰드의 제작은 X-ray lithography 방법을 이용하여 몰드를 제작하고, micro size의 경우 Deep UV lithography 방법을 이용하여 몰드를 제작하고 있다. 본 연구에서는 SLS(Selective Laser Sintering)형 RP(Rapid Prototyping System)을 이용하여 미세구조 몰드를 제작하였으며, 패턴의 깊이는 400 ㎛까지 구현하였다. 제작된 몰드의 강도와 내열성을 높이기 위하여 전해도금을 이용하여 몰드의 표면에 Ni를 300 ㎛생성 시켰다.

• 공업화학
• /
• 제7권6호
• /
• pp.1142-1146
• /
• 1996

콜레스테롤을 갖는 계면활성제를 합성하고, 이 계면활성제를 단량체와 함께 물 속에서 음파파쇄(sonication)하여 막소포(vesicle)용액을 형성한 다음, 이 용액을 건조하여 분자들이 규칙적으로 배열된 분자 다층 구조를 갖는 막을 합성하였다. 이 막에 들어 있는 단량체들을 UV를 이용하여 중합하여 고분자가 층과 층 사이에 들어 있는 분자 다층 구조를 합성하였다. 중합이 끝난 후 유기 용매를 사용하여 계면활성제를 추출하여 2차원적인 구조를 갖는 초박막 층으로 이루어진 고분자 막을 합성하였다. 분자 다층 구조들을 X-ray Diffractometer로 분석하여 다층 구조를 어느 정도 잘 하고 있는지를 살펴보았으며, 유기 용매로 계면활성제를 추출해내고 나서 남은 고분자 막의 절단한 면을 SEM으로 살펴 보았다.

• 멤브레인
• /
• 제6권4호
• /
• pp.213-218
• /
• 1996

중합반응을 할 수 있는 vinyl 기와 콜레스테롤 기를 갖는 계면활성제들을 합성하고, 이 계면활성제들을 물 속에서 sonication하여 vesicle 용액을 형성한 다음, 이 용액을 건조하여 분자들이 규칙적으로 배열된 분자 다층 구조를 갖는 막을 합성하였다. 이 막들을 UV를 이용하여 중합한 다음 분자량을 측정하여 중합성을 살펴보았으며, X-ray diffractometer로 분석하여 다층 구조를 어느 정도 잘하고 있는지극 살펴 보았다.