• 한국정밀공학회지
• /
• 제23권12호
• /
• pp.117-121
• /
• 2006

Generally, micro-stereolithography technology uses laser and complex optical system as light source and light delivery system, respectively. In this research, a novel micro-stereolithography technology that uses UV lamp that is more economical than UV laser as light source and optical fiber that is simpler than previous light delivery system has been developed. Furthermore, precise control system that is composed of 3-axis linear stage and shutter has been used to fabricate truly three dimensional micro-structure. For confirming the feasibility of developed micro-stereolithography apparatus, the solidification experiments were conducted. The solidification widths and depths datum of photopolymer as varying scanning speed of the UV light have been obtained. Using developed apparatus, some micro structures were fabricated successfully.

• 펄프종이기술
• /
• 제31권2호
• /
• pp.58-63
• /
• 1999

Three kinds of papers were prepared from different beating degree of pulps. Physical and optical properties were examined to elucidate the deterioration mechanism of paper according to beating degrees. Changes of double folds, elongation, water retention value, DP, K/S value and visible, UV region light absorption spectra of those papers treated by UV light were studied. Double folds and brightness were decreased more rapidly by UV treatment with increasing of beating degree. The light absorption rates of pulps in visible and UV region were also increased with change of beating level. The formation of new hydrogen bonds and higher light absorption rate of pulps according to beating induced to absorb and interact with much UV light. These phenomena maybe brought about to accelerate paper deteriortion by UV treatment both optical and physical properties.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권9호
• /
• pp.676-680
• /
• 1999

To do breath alcohol measurement, a sensor is necessary that it can detect low alcohol gas concentration of 0.01% at least. In this work, a capacitance-type alcohol gas sensor using porous silicon layer is developed to measure low alcohol gas concentration. The sensor using porous silicon layer has some sensitivity at room temperature by very large effective surface area, but there is still much room for improvement. In this experiment, we measured the capacitance of the sensor under 254 nm UV light on the porous silicon layer, in which alcohol solution was kept in a flask at 25, 35, and $45^{\circ}C$ by a heater. As the result, the improvement of sensitivity by illuminating UV light was observed. The increasing rate of the capacitance was shown to be double more than those measured under UV-off state. It is supposed that UV light activates response of the oriental and interfacial polarizations which have slow relaxation time for AC field.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권5호
• /
• pp.461-466
• /
• 1997

In this paper, we developed the new non-rubbing liquid crystal (LC) alignment techniques in the cell with slanted non-polarized ultraviolet (UV) light irradiation on polyimide (PI) film. It is shown that the uniform alignment for nematic (N) LC is obtained by using slanted non-polarized UV light irradiation on PI surface. We successfully obtained that the pretilt angle of NLC is generated about 3.3 degree in the cell with slanted non-polarized UV light irradiation with 70 degree on PI surface, for the first time. It is considered that the pretilt angle generation in NLC is attributed to interaction between the LC molecular and the PI, which is broken the polymer by slanted non-polarized UV irradiation. Therefore, we concluded that the uniform LC alignment is attributed to anisotropic dispersion force due to photo depolymerization with slanted non-polarized UV light irradiation on PI surface.

• 한국전기전자재료학회논문지
• /
• 제11권10호
• /
• pp.878-884
• /
• 1998

We have investigated that the monodomain alignment of nematic liquid crystal (NLC) is obtained with polarized ultraviolet(PUV) light irradiation on polyimide (PI) surface. The LC alignment capability increases with increasing the UV light irradiation time. The polarized UV light irradiation on oblique angle of 60。 irradiated on PI surface rotated by 90。 at 10 min. after being normally irradiated on PI surface at 30 min., the generated pretilt angle of NLC is about 2.5。. The pretilt angle of NLC is attributed to the interaction between the LC molecules and the asymmetric triangular structure of polymer surface due to photo-depolymerization of polymer with the oblique UV light on PI surface. The voltage -transmittance and response time characteristics of photo-aligned twisted nematic (TN)-LCD with UV light irradiation time 60 min. were almost same in comparison with the rubbing-treated TN-LCD.

• 자연과학논문집
• /
• 제11권1호
• /
• pp.41-44
• /
• 1999

가정용 칫솔 UV 멸균기의 성능을 개선 할 목적으로, 먼저 UV 처리에 따른 칫솔의 멸균효과를 알아보기 위한 실험을 하였다. UV를 5분, 15분, 30분, 60분의 여러 시간동안 처리하여 실험한 결과, 유의성 있는 효과는 15분 후에 나타났으며, 그 때 80% 이상의 세균 치사율이 됨을 알 수 있었다. UV에 장시간 노출될 경우 나타나는 플라스틱의 탈색을 예방하기 위하여 15분 UV 처리 후 2시간의 무처리 시간을 주고, 다시 3분을 처리한 결과, 97%의 치사율을 보임을 알 수 있었다. 한편, 멸균기에서 칫솔 위치에 따른 멸균효과는 UV light를 직접적으로 받는 위치의 칫솔에만 국한되어 멸균이 되어 이의 개선점이 제시되었다.

• 산업기술연구
• /
• 제27권A호
• /
• pp.15-18
• /
• 2007

This study investigated disinfection effect by general water purifier and water purifier with UV light disinfection. The results are as follows : (i) The general bacteria existed plentifully in a storage tank before treatment (ii) Water treated in water purifier did not meet the water treatment regulation standard since the presence of bacteria, whereas with UV light application the regulation standard is totally satisfied. (iii) Photocatalytic disinfection process with UV light in the presence of $TiO_2$ more effectively killed general bacteria than UV light only.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 추계학술대회 논문집
• /
• pp.61-64
• /
• 1998

We have investigated the effects of ultraviolet (UV) light irradiation condition and imidization temperature for the generation of pretilt angle in nematic liquid crystal (NLC) on the two kinds of the polyimide (PI) surfaces. High pretilt angle of NLC is generated with oblique p-polarized UV light irradiation of 30$^{\circ}$ on PI surface for 20 min. Also, the high pretilt angle of NLC is generated with oblique p-polarized UV light irradiation of 10-30$^{\circ}$ on PI surface at 20min. The pretilt angle of NLC decreases with increasing the imidization temperature on all rubbed PI surfaces ; the pretilt angle of NLC with oblique p-polarized UV light irradiation of 30$^{\circ}$on PI surface decreases with increasing the imidization temperature. The high pretilt angle of NLC is observed due to high photo-depolymerization reaction by low surface energy at low imidization temperature. We suggest that the pretilt angle of NLC is strongly attributed to the photo-depolymerization reaction with the UV light irradiation condition and imidization temperature.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.126-132
• /
• 2005

UV disinfection system allows the disinfection of municipal and industrial water and wastewater without the use of expensive chlorination and dechlorination techniques, labor intensive equipments In traditional ultraviolet systems the UV lamps are seperated from water by quartz sleeves. quartz is one of. the few materials that is virtually transparent to UV light, the UV lamp is placed inside the Quartz sleeve. UV light from the lamp is passed through the quartz and into the water, thereby providing disinfection. In fluoropolymer tube-used non-contact UV systems, the water flows through fluoropolymer plastic tubes. banks of UV lamps surround these tubes such that each tube gets exposed to ultra violet light from all sides. in non-contact design the lamps operates at almost constant temperature. this design is extremly efficient in the utilization of UV energy and superior to conventional contact- systems.

• 대한화장품학회지
• /
• 제45권2호
• /
• pp.139-150
• /
• 2019

자외선에 의해 자외선 차단 효율이 상승하는 선크림에 대한 연구를 수행하였다. Ethylhexyl methoxycinnamate (OMC)는 가장 널리 쓰이는 자외선 차단제이고, OMC에 대한 광안정성 연구는 오랫동안 수행되어왔다. OMC는 자외선에 의해 trans구조가 cis구조로 변하거나, dimer를 비롯한 광반응물을 생성하여 자외선 차단효율이 떨어진다고 알려져 왔다. 하지만 본 연구에서는 OMC나 isoamyl p-methoxycinnamate(IMC)와 같이 메톡시신나메이트 구조를 공유하는 자외선 차단제들이 실제 사용조건과 유사한 조건에서 자외선에 노출 시키고 잘 설계된 실험 방법으로 in vitro SPF 수치를 측정하였을 때 오히려 자외선 차단 효율이 증가하는 것을 발견하였다. 이것은 자외선에 의해서 생성된 광반응물과 OMC간의 ${\pi}-{\pi}$ stacking을 통한 ${\pi}-{\pi}^*$ 전이 에너지 변화(UV activated transition) 때문인 것으로 생각된다. 이 발견을 선크림 개발에 적용하기 위해서는 함께 사용되는 에몰리언트의 극성 및 상용성을 적절히 고려해야 한다. 상용성이 좋은 극성 에몰리언트를 포함하면 자외선에 의해 OMC가 광반응물을 생성하지 않기 때문에 발견의 효과가 감소하는 것으로 보인다. 이러한 작용 기전(UV activated SPF boosting)을 바탕으로 상업용 수준의 선크림을 제조하여 평가해보았다. 그 결과 자외선(2 MED)에 노출되었을 때 in vitro SPF 수치는 50.69에서 72.33으로 42.69%로 증가하였고 in vivo SPF 평가에서는 53.7을 얻어 같은 조건의 대조군의 선크림(SPF 34.4 이하) 대비 56.10% 이상 높게 측정되었다. 따라서 OMC와 IMC가 특정 조건에서 UV sensor처럼 작용하여, 자외선에 노출 되었을 때 자외선 차단 효율을 높일 수 있는 선크림을 제조할 수 있었다.