• Journal of Biosystems Engineering
• /
• 제25권4호
• /
• pp.287-292
• /
• 2000

The herbicide penetration on weed leaves was spatially analyzed by using chlorophyll fluorescent emission and machine vision technique. Velvetleaf and metribuzin were used as experimental materials in the study. The herbicide spray images were obtained by a combinaton of a fluorescent dye and a UV lighting system. The herbicide penetration was analyzed by means of detecting chlorophyll fluorescent emission under blue-green lighting. According to the experiment results, the number and the size of spray droplets decreased with coverage increasing. The herbicide penetrated mainly along leaf veins and the time for complete penetration over the whole leaf was approximately 100 minutes after herbicide spraying. When the coverage of herbicide droplets on the surface of leaves increased, the speed of herbicide penetration also increased. This study suggested a way of characerizing herbicide spatial penetration and distribution in leaves.

• 펄프종이기술
• /
• 제37권5호통권113호
• /
• pp.8-14
• /
• 2005

The difference of whiteness, brightness and lightness was clearly explained in this paper by use of a tinting dye and a fluorescent whitening agent which are commercially widely used to make paper look whiter. Other optical properties such as tint, color shade, and color difference were also discussed. It is concluded that in comparing two tinting dyes, lightness (L*) is the most important property to be compared, while whiteness data should be used in caution in order not to surpass its significant range, and a*, b* values can also be used to find the change of color shades together with ${\Delta}E$ as color difference. In comparing two fluorescent whitening agents, whiteness or brightness values are most important to be compared, but lightness values are not suitable for this purpose; a*, b* and color difference ${\Delta}E$ can also be referred, but with less significance.

• The Plant Pathology Journal
• /
• 제17권5호
• /
• pp.271-275
• /
• 2001

Phytoalexin scoparone (6,7-dimethoxycoumarin) was induced in flavedo tissue of lemon fruit inoculated with Penicillium digitatum during heat treatment for 3 days at $36^{\circ}$. The compound was also induced in the flavedo tissue after UV illuminatiion. Induction of scoparone was deteected in the flavedo tissue by histological analysis. This fluorescent scoparone accumulated only on the 4-5 layers of cells adjacent to the inoculation site. Preinoculation with P. digitatum and subsequent heat-treatment induced resistance in the lemon fruit tissues after challenge-inoculation at the site of the first infection. the data obtained in the study suggest that lemon fruit acquired resistance against P. digitatum parallel with the scoparone production at the infection site.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제10권3호
• /
• pp.275-279
• /
• 2005

Insect cell transformants, stably expressing human $GFP_{uv}-{\beta}1$, 3-N-acetylglucosaminyltransferase 2 $({\beta}3GnT2)$ as the green fluorescent protein $(GFP_{uv})-fused$ protein, were efficiently isolated on Western blot by the quantification of the densitometric intensity of the fusion protein. From almost 150 transformants containing the fusion gene linked to three different types of signal sequence, two transformants, Tn-pXme4a and -pX28a, were successfully selected, showing 8.3 and 8.6 mU/mL ${\beta}3GnT$ activity, respectively. This method requires a screening time almost one-half that required in the isolation of stably transformed cells with high expression levels, and at the same time allows the handling a large number of transformants.

• 폴리머
• /
• 제25권3호
• /
• pp.327-333
• /
• 2001

아세틸렌기가 치환된 fluorene 유도체 2-ethynylfluorene과 2,7-diethynylfluorene을 합성하였고 이를 진공 증착하여 박막을 제조하였다. 심중결합이 치환된 fluorene 유도체들은 자외선 및 열에 의해 경화가 가능하였다. DSC 측정 결과 2-ethynylfluorene은 $231^{\circ}C$에서 그리고 2,7-diethynylfluorene은 198$198^{\circ}C$에서 경화가 일어나는 것이 관측되었다. 경화된 poly(2-ethynylfluorene) 및 poly(2,7-diethynylfluorene)의 분해는 380 및 385$^{\circ}C$에서 일어나기 시작하였으며 T$T_g$는 관측되지 않았다. 경화된 박막의 광발광 특성은 단량체와 매우 유사하나, 발광 효율은 3에서 10배 정도 감소하였다.

• 한국전기전자재료학회논문지
• /
• 제30권9호
• /
• pp.577-582
• /
• 2017

The white light of a hybrid LED is obtained by using red and green organic fluorescent layers made of polymethylmethacrylate (PMMA) films, which function as color down-conversion layers of blue light-emitting diodes. In this research, we studied the fluorescence properties of a red organic fluorophore, employing perylene bisimide derivatives applicable to hybrid LEDs. The solubility, thermal stability, and luminous efficiency are important characteristics of organic fluorophores for use in hybrid LEDs. The perylene fluorescent compounds (1A and 1B) were prepared by the reaction of 4-bromophenol and 4-iodophenol with N,N'-bis(4-bromo-2,6-diisopropylphenyl)-1, 6,7,12-tetrachloroperylene-3,4,9,10-tetracarboxyl diimide (1) in the presence of dimethyl formaldehyde (DMF) at $70^{\circ}C$. The synthesized derivatives were characterized by using $^1H-NMR$, FT-IR, UV/Vis absorption and PL spectra, and TGA analysis. Compounds 1A and 1B showed absorption and emission at 570 nm and 604 nm in the UV/Vis spectrum. We also documented favorable solubility and thermal stability characteristics of the perylene fluorophores in our work. Perylene fluorophore 1, with the 4-bromophenol substituent 1A, exhibited particularly good thermal stability and solubility in organic solvents.

• Applied Biological Chemistry
• /
• 제40권3호
• /
• pp.238-242
• /
• 1997

5개 무 품종의 종자를 3시간 물에 침지한 후 cellulose 분말을 코팅하여 UV 광하에서 sinapine 누출정도에 따른 형광색의 분포정도에 따라 무형광(NF)종자, 일부형광(PF)종자, 완전형광(FF)종자로 구분하고, 또 이들 종자와 발아한 유묘의 외부형태를 주사전자현미경(SEM), 광학현미경 및 육안으로 관찰하였다. 종자의 발아율은 무형광(NF)종자>일부형광(PF)종자>완전형광(FF)종자 순으로 낮았으며, 무형광(NF)종자는 종피조직이 치밀하고 둥근 모양이었으나, 일부형광(PF) 및 완전형광(FF)종자는 종피가 주름지거나 상처가 있는 것이 대부분이었다. 또 무형광(NF)종자에서 나온 유묘의 떡잎과 배축은 정상이었으나, 일부형광(PF) 및 완전형광(FF)종자에서 나온 유묘의 떡잎에는 조직이 괴사한 흔적이 많았으며 떡잎과 배축의 크기가 작고 비정상적이었다.

• Journal of Biosystems Engineering
• /
• 제24권5호
• /
• pp.391-398
• /
• 1999

The spraying status of the electrostatic sprayer was evaluated by processing surface spraying images of the natural leaves. Water solution of the fluorescent material was used as a spray medium. The image of the lights reflected by fluorescent droplets was captured under UV light using a color CCD camera. Coverage rate, particle density, and the size distribution of particles were analyzed from the surface images of leaves under various spraying conditions such as spraying nozzle angle and object distance. Spraying characteristics of the electrostatic sprayer was evaluated in comparison with the conventional one. In a case of electrostatic sprayer, coverage rate and particle density increased by the average of 1.57times and 1.01times respectively under various nozzle angles and distances. The number of particle under the diameter of 50 ${\mu}{\textrm}{m}$ also increased significantly.

• Bulletin of the Korean Chemical Society
• /
• 제33권7호
• /
• pp.2359-2364
• /
• 2012

Two new chemosensors, rhodamine 6G derivative bearing hydroxyethyl group (1) and rhodamine base derivative bearing 15-crown-5 group (2) were synthesized and their sensing behaviors toward various metal ions were investigated by UV/Vis and fluorescence spectroscopies. Addition of $Hg^{2+}$ ion to a $CH_3CN$ solution of 1 and 2 gave visual color changes as well as fluorescent OFF-ON observations. Selectivity and sensitivity of 1 towards $Hg^{2+}$ are excellent enough to detect micromolar level of $Hg^{2+}$ ion, even in equeous media and biological sample (HeLa cell).

• International Journal of Industrial Entomology and Biomaterials
• /
• 제17권1호
• /
• pp.121-124
• /
• 2008

The caspase family proteins play an important role in programmed cell death (apoptosis). To date, the expression profiles of the caspase family genes in Bombyx mori (Bm) are poorly known. In this study, we examined the expression profiles of two novel Bm caspase family genes (ice-2 and ice-5), the potential change of the mitochondrial membrane and the morphology in Bm cells after stimulation of ultraviolet (UV) irradiation. The results showed the potential change of the mitochondrial membrane occurred at 5 hours after UV irradiation treatment. Analysis of fluorescent quantitative RT-PCR demonstrated that both the ice-2 and ice-5 might be involved in UV induced apoptosis in Bm cells. Notably, after UV irradiating, expression pattern of ice-2 and ice-5 were remarkably different. The ice-2 gene was highly expressed at two time points, 0.5 and 5 hours after UV stimulating, while the expression level of ice-5 only peaked at 5 hours after UV stimulating. It indicated that apoptosis induced by UV irradiation was involved in the mitochondrial pathway and the two isoforms of Bm ice may act but play different role during the apoptosis of Bm cells.