• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.1
• /
• pp.69-75
• /
• 2009

The characteristics of disinfection and organic removal were investigated with pulse UV lamp in this study. The intensity and emission wavelength of pulse UV Lamp were compared with low pressure UV lamp. The emission spectrum range of pulse UV lamp was between 200 and 400 nm while the emission spectrum of low pressure UV lamp was only single wavelength of 254nm. 3 Log inactivation rate of B. subtilis spore by pulse UV and low pressure UV irradiation was determined as $44.71mJ/cm^2$ and $57.7mJ/cm^2$, respectively. This results implied that wide range of emission spectrum is more effective compared to single wavelength emission at 254nm. 500ng/L of initial 2-MIB concentration was investigated on the removal efficiency by UV only and $UV/H_2O_2$ process. The removal efficiency of UV only process achieved approximately 80% at $8,600mJ/cm^2$ dose. 2-MIB removal rate of $UV/H_2O_2$ (5 mg/L $H_2O_2$) process was 25 times increased compared to UV only process. DOC removal efficiency for the water treatment plant effluent was examined. The removal efficiency of DOC by UV and $UV/H_2O_2$ was no more than 20%. Removal efficiency of THMFP(Trihalomethane Formation Potential), one of the chlorination disinfection by-products, is determined on the UV irradiation and $UV/H_2O_2$ process. Maximum removal efficiency of THMFP was approximately 23%. This result indicates that more stable chemical structures of NOM(Natural Organic Matter) than low molecule compounds such as 2-MIB, hydrogen peroxide and other pollutants affect low removal efficiency for UV photolysis. Consequently, pulse UV lamp is more efficient compared to low pressure lamp in terms of disinfection due to it's broad wavelength emission of UV. Additional effect of pulse UV is to take place the reactions of both direct photolysis to remove micro organics and disinfection simultaneously. It is also expected that hydrogen peroxide enable to enhance the oxidation efficiency on the pulse UV irradiation due to formation of OH radical.

• Macromolecular Research
• /
• v.11 no.2
• /
• pp.92-97
• /
• 2003

Model compounds and polymers having N-substituted 1,2-diphenylmaleimide moieties were synthesized and characterized by NMR, IR, UV, and fluorescence spectroscopy. The fluorescence intensity could be controlled by N-substituents of model compounds and polymers. As the structure of an N-substituent of them was bulkier, or the electron density of an N-substituent was denser, the photoluminescence intensity was increased. All the compounds showed greenish yellow photoluminescence with the maximum intensity between 510 and 537 nm. From quantum efficiency data of the model compounds and the polymers, the fluorescence intensity of the polymer 11 was higher than that of the model compound 4.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.88.1-88.1
• /
• 2015

In recent printed electronics technology, Photo-Sintering, a technique for sintering materials using a light source, has attracted attention as an alternative to time-consuming high-temperature thermal processes. The key principle of this technique is the selective heating of a strongly absorbent thin film, while preventing the heating of the transparent substrate by the light source. Many recent studies have used a flash lamp as the light source, and investigated the material-dependent effect of the width or intensity of the pulsed light. However, the flash lamp for sintering is not suitable for industry yet, because of needing too high power to sinter for a large scale. In energy-saving and large-scale sintering, LED technologies would be very useful in the near future. In this work, we investigated a sintering process for silver nanoparticles using UV-LED array. Silver nanoparticles in ink were inkjet-printed on a $1{\times}1cm$ area of a PET film and photo-sintered by 365 nm UV-LED module. A sheet resistance value as low as $72.6m{\Omega}/sq$ (2.3 - 4.5 times that of bulk silver) was obtained from the UV-LED sintering at 300 mW/cm2 for 50 min.

• Analytical Science and Technology
• /
• v.7 no.1
• /
• pp.17-23
• /
• 1994

Through sol-gel process, inorganic/organic composite as a dye host was made. It was observed that this composite has about 90% of trnasmittance by UV/VIS spectrophotometer. The transmittance is the most important requirement to decide whether the composite could apply or not as the dye host. The transmittance was increased with decreasing HCl as a catalyst, aging time, and amount of PDMS. Also, fluorescent and transmittant charateristics of Rhodamine 6G Perchlorate that was doped into ORMOSIL were measured. The fluorescent intensity was increased and the trnasmittance was decreased with rising gelling temperature.

• Korean Journal of Food Science and Technology
• /
• v.25 no.2
• /
• pp.171-173
• /
• 1993

UV-ray air cleaner consisted of 6 watt UV lamp and fan was developed to sanitize air of refrigerator. Light intensity of the lamp showed 5 times of D value of Bacillus subtilis and air velocity around the lamp in holding section was 0.7 m/s, giving 0.33s of the resident time. The performance of air cleaner was tested with bacterial contaminator sprayed with suspension of Bacillus subtilis and hey powder. The device effectively decreased 80% of the population of airborn spore after 100 min operation at room temperature.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.9
• /
• pp.444-449
• /
• 2001

In this paper, a novel ultraviolet sensor is presented based on a photoluminescent porous silicon. Porous silicon layer was formed by chemical etching of surface of pn junction in a $HF(48%)-HNO_3(60%)-H_20$ solution. Incident ultraviolet(UV) light is converted to visible light by photoluminescent porous silicon layer, and then this visible light generates electron-hole pairs in the pn junction, which produces a photocurrent flow through the device. In order to maximize detection efficiency, the peak sensitivity wavelength of the pn junction diode was matched with the peak wavelength of Photoluminescence from porous silicon layer. The porous silicon ultraviolet sensor showed a large output current as UV intensity increases and but very low sensitivity to visible light. The detection sensitivity of porous silicon sensor was calculated as 2.91mA/mW. These results are expected to open up a possibility that the present porous silicon sensor can be used for detecting UV light in a visible background, compared to silicon UV detectors which have an undesirable response to visible light.

• Macromolecular Research
• /
• v.11 no.3
• /
• pp.146-151
• /
• 2003

The dependence of electrical conductivity on concentrations of diallyldimethylammonium chloride (DADMAC) monomer, linear poly(DADMAC) and their mixture monomer/poly(DADMAC) in dilute aqueous solution exhibits a linear relationship. It was possible to calculate conversion of DADMAC polymerization by measuring its electric conductivity. Although the electrical conductivity of the poly(DADMAC) solution decreased with increasing its molecular weight, in the process of UV or ionizing radiation polymerization the molecular weight of the polymers could be kept constant in the case of fixed temperature, UV-luminous intensity or dose rate. Based on the method mentioned above, the kinetics of UV induced polymerization of DADMAC in aqueous solution was studied; the overall activation energy of polymerization of DADMAC in the water phase was calculated to be 18.8 kJ mol$^{-1}$ . ${\gamma}$-Radiation-induced polymerization of DADMAC in aqueous solution as a function of absorbed dose was studied as well. The conversion of DADMAC increased quickly with dose before 30 kGy and then increased slowly. The experimental data of both UV- and ${\gamma}$-induced polymerization were verified to be reliable by inverted ultracentrifugation method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.24-27
• /
• 2004

ZnS nanoparticles were synthesized and doped with $Pr^{3+}\;and\;Mn^{2+}$. Photoluminescence(PL) peaks were observed at 430 nm for pure ZnS, 585 nm for $Mn^{2+}-doped$ ZnS, and at around 430, 460, 480, 495 nm for ZnS nanoparticles doped with $Pr^{3+}$, respectively. For co-doped sample, both characteristics of doping with each element were exhibited. Optical annealing through UV irradiation was carried out in the two atmospheres; air and vacuum. The increases of the luminescence intensity was more considerable in the air, which is attributed to the photo-induced oxidation. In the case of co-doped sample the change of the emission color was observed by UV annealing.

• Journal of Photoscience
• /
• v.8 no.1
• /
• pp.1-7
• /
• 2001

The deteriorative effect of ultraviolet-B(UV-B) radiation on photosynthesis was assessed by the simultaneous measurement of O$_2$ evolution and chlorophyll(Chl) fluorescence in green pepper. UV-B was given at the intensity of 1 W$.$m$\^$-2/, a dosage often encountered in urban area of Seoul in Korea, to detached leaves. Both Pmax and quantum yield of O$_2$ evolution was rapidly decreased, in a parallel phase, with increasing time of UV-B treatment. Chl fluorescence parameters were also significantly affected. Fo was increased while both Fm and Fv were decreased. Photochemical efficiency of PSII(Fv/Fm) was also declined, although to a lesser extent than Pmax. Both qP and NPQ were decreased similarly with increasing time of UV-B treatment. However, PS I remained stable. The addition of lincomycin prior to UV-B treatment accelerated the decline in Fv/Fm to some extent, suggesting that D1 protein turnover may play a role in overcoming the harmful effect of UV-B. The amount of photosynthetic pigments was less affected than photosynthetic response in showing decline in Chl a and carotenoids after 24 h-treatment. Presumptive flavonoid contents, measured by changes in absorbance at 270 nm , 300 nm and 330nm, were all increased by roughly 50% after 8 h-treatment. Among antioxidant enzymes, activities of catalase and peroxidase were steadily increased until 12h of UV-B treatment whereas ascorbate perxidase, dehydroascorvate reductase and glutathione reductase did not show any significant change. The results indicate that deteriorative effect of UV-B on photosynthesis precedes the protection exerted by pigment synthesis and antioxidant enzymes.

• Microbiology and Biotechnology Letters
• /
• v.11 no.3
• /
• pp.155-161
• /
• 1983

The effects of ultraviolet light on bacteriophage f2 were investigated to determine the inactivation kinetics and its mechanism. The 260nm light showed a little higher inactivation rate than the one of 300 nm. In this work, our main concern was whether structural and/or conformational changes in the protein capsid could occur by UV irradiation. The inactivation for the first 20 minutes irradiation was rapid with a loss of about 4 logs and followed by a slower rate during the next 40 minutes with no survival noted in the samples irradiated for 90 minutes or longer. The structural change of the protein capsid was examined by optical spectroscopic techniques and electron microscopy. The absorption spectra of the UV irradiated phages showed no detectable differences in terms of the spectral shape and intensity from the control phage. However, the fluorescence emission spectroscopic data, i.e. 1) fluorescence quenching of tryptophan residues upon irradiation of 300 nm light, 2) enhancement of fluorescence emission of ANS (8-aniline-1-naphthalene sulfonate) bound to the intact phages compared to the one in the UV-treated phages, and 3) decrease of energy transfer efficiency from tryptophan to ANS in the UV-treated samples, presented remarkable differences between the intact and UV-treated phages. Such a structural alteration was also observed by electron microscopy The UV-treated phages appeared to be broken and empty capsids. Therefore, the inactivation of the bacteriophage f2 by UV irradiation is thought to be attributed to the structural change in the protein capsid as well as damage in the viral RNA by UV irradiation.