• Applied Microscopy
• /
• v.19 no.2
• /
• pp.17-26
• /
• 1989

The cells of Campylobacter jejuni treated with physical or chemical disinfection agents were comparatively examined by scanning and transmission electron microscopies for their morphological features and internal ultrastructures. The normal cells of C. jejuni, showed typical spiral rod shapes. The ribosomes, nucleoids, and other cellular constituents were observed to be distributed evenly throughout the cytoplasm. The cells treated with heat or UV-light were changed to spherical or irregular shapes and their cell envelopes were destroyed to form ghost cells by liberating their cytoplasmic components. The cells treated with chlorine or monochloramine were also changed into irregular round shapes. The chlorinated cells showed very rough surface structures with many blob-like protrusions, while the surface of the monochloramine-treated cells appeared to be relatively smooth.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.3
• /
• pp.202-204
• /
• 1995

The ultraviolet photochemistry of N,N'-bis(salicylidene)ethylenediamine copper(II), Cu(sal)2en, was investigated with low pressure mercury lamp. Redution of Cu(Ⅱ) and formation of Cl- were shown on 254 nm irradiation both for aerated and deaerated chlorinated hydrocarbon solvent such as CH2Cl2, chloroform, and 1,2-dichloroethane. Relatively long lived $({\tau}=100{\mu}sec)$ intermediate was detected by flash photolysis. Overall photo-process can be described as the formation of Cl- and new copper complex, product(1) by chlorohydrocarbon mediation, photoinduced reduction by abstraction of halogen from solvent, followed by redox induced substitution of axial ligand with chlorine. Product(1) is possibly Cu(III) chlorosalicylaldeimido complex and cyclic -CH2CH2- moiety is absent in the structure. 247nm band of Cu(sal)2en should contain ligand to metal charge transfer character.

• Journal of Sensor Science and Technology
• /
• v.15 no.5
• /
• pp.323-327
• /
• 2006

Manganese, copper and chlorine-doped ZnS phosphors (ZnS:Mn,Cu,Cl) were synthesized through solid-state reaction. Manganese was added in the range of amount $1.4{\sim}5.3$ mol % to ZnS phosphors containing 0.2 or 1.0 mol % of copper and a small amount of chlorine. As-synthesized phosphors showed a spherical morphology with a mean size of ${\sim}20\;{\mu}m$ and structural properties of Wurtzite, which were identified by SEM and XRD, respectively. Optical properties of ZnS:Mn,Cu,Cl synthesized with various concentrations of activators were analysed by both of PL and EL spectra. Samples mainly showing only 580 nm-orange emission by 380 nm-UV excitation gave different EL spectra of blue, green, and orange emissions at 450, 480 and 580 nm, respectively, depending on concentrations of $Cu^{2+}$ and $Mn^{2+}$.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.1
• /
• pp.1-7
• /
• 2023

Chlorine dioxide (ClO₂) is widely used for post-harvest sterilization treatment. However, there are limitations in the retail application of ClO₂ due to difficulties in handling, expensive facilities, and safety concerns. Therefore, it is necessary to develop a ClO₂ technology that can be easily applied and continuously released for a long period. In this study, a series of ClO₂ self-releasing sachets were developed. First, poly(ether-block-amide) (PEBAX) and polyethylene-glycol (PEG) composite films containing different ratios of citric acid (CA) were prepared using the solution casting method. The as-prepared PEBAX/PEG-CA composite films were evaluated using FT-IR, DSC, and TGA to confirm chemical structure and thermal properties. Subsequently, PEBAX/PEG-CA composite films were designed in the form of a sachet and NaClO₂ powder was transferred into the sachet to achieve a ClO₂ self-releasing system. The ClO₂-releasing behavior of the sachet was investigated by measuring the release amount of the gas using UV-vis. The release amount of ClO₂ increased with increasing CA contents owing to the existence of higher protons (trigger) in the polymer matrix. Further, ClO₂ gas was released for a longer time. Therefore, the as-prepared smart sachet can be tuned according to applications and packaging sizes to serve an optimal sterilization effect.

• Journal of Korean Society on Water Environment
• /
• v.20 no.1
• /
• pp.55-62
• /
• 2004

This study was carried out to investigate the formation of DBPs(Disinfection By-products) such as trihalomethane(THMs) and haloacetic acid(HAAs) by chlorination in raw water and finished water of Water Treatment Plant(WTP). The formation of THMs was increased with the increase of pH and reaction time. HAAs was found as a high formation at a pH 7 and low formation at pH 9. THMFP(Trihalomethane Formation Potential) was the highest formation potential in raw water of Pu-1 and the lowest in raw water of Pa-1. In case of HAAFP(Haloacetic acid formation potential), So-1 showed the highest value, while Pa-1 showed the lowest value. It was investigated the relationship between HAAs and organic matters which were described as DOC(dissolved organic carbon) and $UV_{254}$. In both DOC and $UV_{254}$ versus HAAFP, Pu-1 showed the good correlation coefficients($r^2$) with 0.95 and 0.84, respectively. For three WTP investigated, DBPs(THMs + HAAs) was shown over the range of $42.00{\sim}49.36{\mu}g/L$. This result might be due to the different characteristic of organic matters in raw water and the difference of chlorine dosage for a water treatment.

• Journal of Korean Society of Water and Wastewater
• /
• v.28 no.5
• /
• pp.541-548
• /
• 2014

The pickling brine generated from the salting process of kimchi production is difficult to treat biologically due to very high content of salt. When pickling brine is treated and discharged, it cannot satisfy the criteria for effluent water quality in clean areas, while resources such as the salt to be recycled and the industrial water are wasted. However, sterilization by ozone, UV and photocatalyst is expensive installation costs and operating costs when considering the small kimchi manufacturers. Therefore there is a need to develop economical process. The study was conducted on the sterilization efficiency of the pickling brine using electrochemical processing. The electrochemical treatment of organic matters has advantages over conventional methods such as active carbon absorption process, chemical oxidation, and biological treatment because the response speed is faster and it does not require expensive, harmful oxidizing agents. This study were performed to examine the possibility of electrochemical treatment for the efficient processing of pickling brine and evaluated the performance of residual chlorine for the microbial sterilization.

• Advances in environmental research
• /
• v.1 no.3
• /
• pp.181-189
• /
• 2012

Trihalomethanes, produced as a result of chlorination of drinking water, are considered a potential health hazard. The trihalomethane formation potential (THMFP) of a raw water source may indicate the maximum trihalomethanes (THMs) that are likely to be produced when chlorine reacts with natural organic matter (NOM) present in the water. A study was conducted to evaluate the THMFP in seven different drinking water sources in the vicinity of Kalpakkam, a rural township, on the east coast of India. Water from seven stations were analysed for THMFP. THMFP was compared with surrogate parameters such as dissolved organic carbon (DOC), ultraviolet absorbance ($UV_{254}$) and bromide. The data showed that THMFP was high in water from open wells as compared to closed bore wells, possibly due to more photosynthetic activity. Proximity to sea, and consequently the levels of bromide, was an important factor that influenced THM formation. THM surrogate parameters showed good correlation with THMFP.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.4
• /
• pp.411-416
• /
• 2010

Interest in application of ultraviolet light technology for primary disinfection of potable water in drinking water treatment plants has increased significantly in recent years. The efficacy of disinfection processes in water purification systems is governed by several key factors, including reactor hydraulics, disinfectant chemistry, and microbial inactivation kinetics. The objective of this work was to develop a computational fluid dynamics(CFD) model to predict velocity fields, mass transport, chlorine decay, and microbial inactivation in a continuous flow reactor. In this paper, It describe the how to design optimal UV disinfection device for ground water, BWT and rainwater. Spring shape instrument silver coated located in inner side of disinfection chamber. It make lead the active flowing movement target water and maximize disinfection performance. To search the optimal design method, it was performed computer simulation with 3D-CFD discrete ordinates model and manufactured prototype. Using proposed design method, performed simulation and proved satisfied performance.

• Journal of Environmental Health Sciences
• /
• v.44 no.3
• /
• pp.244-249
• /
• 2018

Objectives: The purpose of this study was the investigation of bromide and bromate in drinking water of water supply plants, mineral springs and small water supply system located in northern area of Gyeonggi province. Methods: Analytical method was based on EPA 326.0 to use Postcolumn reaction (PCR). The instrument was 887 professional UV/VIS detector IC manufactured in Metrohm. Results: Bromate was detected at $0.5{\sim}2.4{\mu}g/L$ in tap water from 5 water supply plants. These plants were used as disinfection method for sodium hypochlorite and on-site chlorine that causes generate bromate as a by products even if not used ozone. Conclusions: The bromate was detected up to $2.5{\mu}g/Lin$ drinking water in northern Gyeonggi area that showed within $10{\mu}g/L$ for standard of tap water. However, the continuous monitoring of bromate is necessary in drinking water.

• Macromolecular Research
• /
• v.14 no.2
• /
• pp.173-178
• /
• 2006

Poly(3-(2-hydroxyethyl)thiophene) (P3HET) was synthesized using oxidative coupling polymerization that involved the protecting and deprotecting of hydroxyl groups but not the chlorine substitution or oxidative decomposition of the hydroxyl groups. The resulting P3HET exhibited good solubility in aprotic solvents, in contrast to the insoluble polymer product synthesized directly from the monomer, 3-(2-hydroxyethyl)thiophene (3HET). P3HET had low conductivity due to the strong hydrogen bonding of its hydroxyl groups. The ester-functionalized poly(3-(2-acetoxyethyl)thiophene) and poly(3-(4-pentylbenzoateethyl)thiophene) were also prepared with reasonably high molecular weights in order to examine how this functionalization modified the physical and chemical properties of P3HET. These polymers exhibited better solubility in common solvents and higher conductivity than P3HET. All these polymers exhibited bathochromic shifts of their film state absorption maxima with respect to those found in the UV-visible spectra of their solution phases. The extent of the bathochromic shift was found to vary with the lengths of the side chains of the ester-functionalized polymers.