• 공업화학
• /
• 제22권4호
• /
• pp.348-352
• /
• 2011

본 연구에서는 펜던트 타입의 고분자인 폴리우레탄에 스틸벤 유도체를 가진 다양한 발색단을 곁가지로 도입하고, 이를 연결하는 방식으로 분자를 디자인하고 합성하였다. 모노머 분자인 N,N-bis(2-hydroxyethyl)amino-4'-cyanostilbene, N,N-bis(2-hydroxyethyl) amino-4'-methoxy stilbene, N,N-bis(2-hydroxyethyl)amino-4'-acetylstilbene, N,N-bis (2-hydroxyethyl) amino stilbene은 Wittig 반응을 이용하여 합성하였고, N,N-bis(2-hydroxyethyl)amino-4'-nitrostilbene는 Knoevenagel 축합반응을 이용하여 합성하였다. 합성된 물질의 흡수 및 형광 스펙트럼의 측정으로부터, 치환기로 전자 끌게 작용기를 도입한 경우 그 정도에 따라 스펙트럼이 장파장으로 이동하며, 반대로 전자 주게 작용기가 도입된 경우는 단파장 이동하는 것을 확인 하였다. 반면, $NO_2$가 치환된 경우 그 자체가 빛을 소멸시키는 쾐쳐로 작용하여 PL이 관측되지 않았다.

• International journal of advanced smart convergence
• /
• 제8권3호
• /
• pp.27-38
• /
• 2019

I reviewed about dyeing fastness and functional properties of the non-mordant dyed cotton and iron mordant dyed cotton with astringent persimmon juice. In the UV-VIS spectrum of astringent persimmon juice, the maximum absorption wavelength of the juice was 272.0 nm, which was a characteristic peak of tannin. In dyeing fastness, light fastness of the non-mordant dyed cotton was a little low at grade 2~3. But by the iron mordant treatment, the light fastness was good at grade 4. Dry cleaning fastness to discoloration and contamination was excellent at grade 4~5 for both the non-mordant dyed cotton and iron-mordant dyed cotton. Their rub fastness were grade 3 and grade 2~3 respectively, in the dry condition, and grade 2~3 and grade 3 respectively, in the wet condition. In the perspiration fastness of the non-mordant dyed cotton, the discoloration from acidity and alkalinity was grade 3~4 and grade 3, respectively, and contamination from acidity and alkalinity was relatively good at grade 4. Meanwhile, in the perspiration fastness of the non-mordant dyed cotton, discoloration from acidity and alkalinity was fair, both recording grade 3~4, and contamination from acidity and alkalinity was very good, both recording grade 4~5. In the ultraviolet protection effect of the non-mordant dyed cotton and iron-mordant dyed cotton, the ultraviolet protection factor was both 50+, both of which showed an excellent ultraviolet blocking effect. And the protection rate of UV-A appeared 98.4% and 99.1%, respectively, and the protection rate of UV-B showed 98.7% and 99.2, respectively. In addition, both exhibited an excellent deodorization rate over 99.9% or more, irrespective of the passage of time. Also, both showed an excellent antimicrobial activity over 99.9% or more against Staphylococcus aureus and Klebsiella pneumoniae.

• 분석과학
• /
• 제11권2호
• /
• pp.96-104
• /
• 1998

수 많은 광검출기들이 직선으로 집적된 광다이오드 어레이를 이용한 모세관 전기영동장치용 다채널 검출기를 개발하였다. 본 연구에서 사용된 광다이오드 어레이는 1024개의 광검출소자를 가지고 있으며 275~675 nm 파장범위에서 시료의 흡수분광스펙트럼을 검출할 수 있다. 이 장치는 30 ms내에 전 파장영역의 스펙트럼을 얻을 수 있으며, PC에 의하여 시료분석에 필요한 여러 가지 조건들을 제어할 수 있도록 설계하였다. 개발된 검출기의 성능을 L-ascorbic acid와 alizarin yellow GG를 사용하여 시험하였다. 본 연구에서 개발한 모세관 전기영동장치용 다채널 검출기의 재현성 실험결과 상대 표준편차는 5.6%이었다.

• 한국분말재료학회지
• /
• 제12권4호
• /
• pp.266-272
• /
• 2005

Transition metal ions($Ni^{2+}$, $Cr^{3+}$ and $V^{5+}$) doped $TiO_2$ nanostructured powders were synthesized by mechanical alloying(MA) to shift the adsorption threshold into the visible light region. The synthesized powders were characterized by XRD, SEM, TEM and BET for structural analysis, UV-Vis and photoluminescence spectrum for the optical study. Also, photocatalytic abilities were evaluated by decomposition of 4-chlorophenol(4CP) under ultraviolet and visible light irradiations. Optical studies showed that the absorption wavelength of transition metal ions doped $TiO_2$ powders moved to visible light range, which was believed to be induced by the energy level change due to the doping. Among the prepared $TiO_2$ powders, $NiO^{2+}$ doped $TiO_2$ powders, showed excellent photooxidative ability in 4CP decomposition.

• 한국전기전자재료학회논문지
• /
• 제23권3호
• /
• pp.199-205
• /
• 2010

The crystallization speed (v) of amorphous (InTe)$_x$(GeTe) (x = 0.1, 0.3 and 0.5) films and their thermal, optical and electrical behaviors have been investigated using nano-pulse scanner (wavelength = 658 nm, laser beam diameter < 2 ${\mu}m$), X-ray diffraction (XRD), 4-point probe and UV-vis-IR spectrophotometer. These results were compared with those of $Ge_2Sb_2Te_5$ (GST) film, comprehensively utilized for phase-change random access memory (PRAM). Both v-value and thermal stability of (InTe)$_{0.1}$(GeTe) and (InTe)$_{0.3}$(GeTe) films could be enhanced in comparison with those of the GST. Contrarily, the v-value in the (InTe)$_{0.5}$(GeTe) film was so drastically deteriorated that we could not quantitatively evaluate it. This deterioration is thought because amorphous (InTe)$_{0.5}$(GeTe) film has relatively high reflectance, resulting in too low absorption to cause the crystallization. Conclusively, it could be thought that a proper compositional (InTe)$_x$(GeTe) films (e.g., x < 0.3) may be good candidates with both high crystallization speed and thermal stability for PRAM application.

• 한국분말재료학회지
• /
• 제21권6호
• /
• pp.441-446
• /
• 2014

In this study, we synthesize silica-core gold-satellite nanoparticles (SGNPs) for the surface-enhanced Raman scattering (SERS) based sensing applications. They consist of gold satellite nanoparticles (AuNPs) fixed on the silica core nanoparticles, which sizes of AuNPs can be tunned by varying the amount of reactants (growth solution and reducing agent). Their surface plasmon resonance (SPR) properties were characterized by using UV-vis spectroscopy, showing that the growth of AuNPs on silica cores leads to the light absorption in the longer wavelength region. Furthermore, the size increase of AuNPs exhibited the dramatic change in SERS activity due to the formation of hot spots. The optimized SGNPs showing enhancement factor ${\sim}3.8{\times}10^6$ exhibited a detection limit of rhodamine 6G (R6G) as low as $10^{-8}M$. These findings suggest the importance of size control of SGNPs and their SPR properties to develop highly efficient SERS sensors.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.62.1-62.1
• /
• 2011

The structural, optical, and electrical properties of Ga-doped ZnO (GZO) thin films on glass substrates grown by radio-frequency(RF) magnetron sputtering were investigated. The flow ratio of Ar was varied as a deposition parameter for growing high-quality GZO thin films. The structural properties and surface morphologies of GZO were characterized by the X-ray diffraction. To analyze the optical properties of GZO, the optical absorbance was measured in the wavelength range of 300-1100 nm by using UV-VIS spectrophotometer. The optical transmittance, absorption coefficient, and optical bandgap energy of GZO thin films were calculated from the measured data. The crystallinity of GZO thin films is improved and the bandgap energy increases from 3.08 to 3.23eV with the increasing Ar flow ratio from 10 to 100 sccm. The average transmittance of the films is over 88% in the visible range. The lowest resistivity of the GZO is $6.215{\times}10^{-4}{\Omega}{\cdot}cm$ and the hall mobility increases with the increasing Ar flow ratio. We can optimize the characteristics of GZO as a transparent electrode for thin film solar cells by controlling Ar flow ratio during deposition process.

• 한국전기전자재료학회논문지
• /
• 제20권11호
• /
• pp.932-938
• /
• 2007

The structural, optical, and electrical properties of ZnO thin films grown on glass by radio-frequency (rf) magnetron sputtering were investigated. The mixture flow ratio of $O_2$ to Ar, which was operated with sputtering gas, was chosen as a parameter for growing high-qualify ZnO thin films. The structural properties and surface morphologies of the thin films were characterized by the X-ray diffraction and the atomic force microscope, respectively. As for the optical properties of the films, the optical absorbance was measured in the wavelength range of 300-1100 nm by using UV-VIS spectrophotometer. The optical transmittance, absorption coefficient, and optical bandgap energy of ZnO thin films were calculated from the measured data. The crystallinity of the films was improved and the bandgap energy was increased from 3.08 eV to 3.23 eV as the oxygen flow ratio was increased from 0 % to 50 %. Furthermore, The ultraviolet and violet luminescences were observed by using photoluminescence spectroscopy. The hall mobility was decreased with the increase of oxygen flow ratio.

• 한국의류산업학회지
• /
• 제7권5호
• /
• pp.547-552
• /
• 2005

The study has objective in raising value of the gray color as a meaningful color suiting sentiments of modern people by expressing the gray color in various perspective utilizing natural dyes that is natural at the same time having aesthetic color tones. For example, the main ingredient used for coloring black and gray color is the pyrogallol tannin and the gray tone dye can be acquired by combining the tannin with iron. In order to find the suitable condition for processing tannin, UV-Vis part absorption spectrum of Gallapple pyrogallol tannin, dye ability based on temperature and time, reflection rate based on concentration, color changes based on acid treatment and alkali treatment, changes on surface based on concentration or metal mordant condition, and lightfastness were measured. Maximum absorption wavelength (${\lambda}_{max}$) of Gallapple tannin was at around 273 nm, while strong absorption was also observed at below 350 nm. Dye ability of Gallapple tannin is done more easily on silk rather than cellulose fibers such as cotton, while the optimum condition for dyeing was observed to be at $60^{\circ}C$, for 20 minutes. As a result of acid treatment, the color of dye material consist highly of gray tones and showed red tone after the alkali treatment. While it was observed that as dye concentration and metal mordant concentration increased the color changed at counter-clockwise direction on the Y-scale of Munsell's scale of colors. Lightfastness was more on a normal fading. I hope this study opens up possibilities towards presenting gray color expressed from tannin as color with diversity and aesthetic value. In future, comparative study between dye expressed from catechol tannin dye materials will be helpful.

• 한국의류산업학회지
• /
• 제8권3호
• /
• pp.343-348
• /
• 2006

This study aims to attain gray tone dyed goods by using tannin that is contained in green tea. Tannin is given general name of polyphenol, which has a characteristic that bonds with protein and it is used for food preservative that protects against bacteria, as well as its purpose of black tone dye for silk treatment that has been processed since its early ages. In particular, as tannin reacts with all kinds of metallic mordant and changes to various colors, when tannin acid is combined with iron, it becomes tannin steel and produces gray tone color. Tannin that is contained in green tea is condensed tannins and its structure does not hydrolyze, thus having flavan type structure. In order to find the suitable condition for processing tannin, UV-Vis part absorption spectrum of green tea tannin, dye ability based on temperature and time, reflection rate based on concentration, color changes based on acid treatment and alkali treatment, changes on surface based on concentration or metal mordant condition, and lightfastness were measured. Maximum absorption wavelength (${\lambda}_{max}$) of green tea tannin was at around 273nm, while strong absorption was also observed at below 350 nm. Dye ability of green tea tannin is done more easily on silk rather than cellulose fibers such as cotton, while the optimum condition for dyeing was observed to be at $60^{\circ}C$, for 20 minutes. As a result of acid treatment, the color of dye material consisted highly of gray tones and showed overall gray tone with the combined color of yellow and red after the alkali treatment. While it was observed that as dye concentration and metal mordant concentration increased, the color changed at counter-clockwise direction on the Y-scale of Munsell's scale of colors. Additionally, lightfastness was more on a normal fading.