• 한국표면공학회지
• /
• 제29권6호
• /
• pp.862-868
• /
• 1996

Cadmium sulfide is commonly used as the window material for thin film solar cells, and can be prepared by several techniques such as sputtering, spray pyrolysis, close spaced sublimation (CSS), thermal evaporation, solution growth methods, etc. In this study, CdS films were deposited by thermal evaporation, close spaced sublimation, and solution growth methods, respectively, and the effects of the methods on physical properties of polycrystalline CdS deposited on ITO/glass were investigated. Also, the effects of variously prepared CdS thin films on the physical properties of CdTe deposited on the CdS were investigated. The thickness of polycrystalline CdS films was maintained at $0.3\mu\textrm{m}$ except for the solution grown CdS when $0.2\mu\textrm{m}$ thick CdS was deposited. After the deposition, all the samples were annealed at $400^{\circ}C$ or $500^{\circ}C$ in H2 atmosphere. To investigate physical properties of the deposited and annealed CdS thin films, UV-VIS spectro-photometry, X-ray diffractometry (XRD), and Auger electron spectroscopy (AES), and cross sectional transmission electron microscopy(XTEM) were used to analyze grain size, crystal structure, preferred orientation, optical properties, etc. The annealed CdS showed the bandedge transition at 510nm and the optical transmittance high than 80% for all of the variously deposited films. XRD results showed that CdS thin films variously deposited and annealed had the same hexagonal structures, however, showed different preferred orientations. CSS grown CdS had [103] preferred orientation, thermally evaporated CdS had [002], and CdS grown by the solution growth had no preferred orientation. The largest grain size was obtained for the CSS grown CdS while the least grain size was obtained for the solution grown CdS. Some of the physical properties of CdTe deposited on the CdS thin film such as grain size at the junction and grain orientation were affected by the physical properties of CdS thin films.

• 분석과학
• /
• 제6권3호
• /
• pp.289-296
• /
• 1993

자연수 중 극미량 몰리브덴[Mo(VI)]을 분리 정량하기 위하여 Mo(VI)의 킬레이트이온을 이온쌍으로 만들어 유기용매로 상승 용매추출시키는 방법에 대해 검토하였다. 자연수 시료 100mL를 분별 깔때기에 취하였다. pH 4.0인 시료에 0.01M alizarin red S 용액 0.5mL를 가하여 Mo(VI)-ARS의 킬레이트이온을 형성시킨 다음, aliquat-336을 0.2% 되게 녹인 chloroform 10mL를 가해 30초 정도 격렬하게 흔들어 모든 킬레이트이온이 이온쌍을 형성하여 용매층으로 분배되도록 하였다. 90분간 방치하여 두 쌍이 완전히 분리되면 chloroform층을 받아서 520nm에서 흡광도를 측정하여 검정곡선법으로 Mo(VI)을 정량하였다. 이상의 과정에서 용액의 pH, alizarin red S와 aliquat-336의 가해 주는 양, 흔들어 주고 방치하는 시간 등과 같은 추출조건에 대해서 검토하였다. 실제 시료인 강물과 수돗물의 분석에 응용하였다. 이들 시료에 Mo(VI)을 일정량 가하여 분석한 회수율은 모두 99% 이상으로 본 방법이 정량적임을 확인하였다.