• 제목/요약/키워드: UT measurement

검색결과 39건 처리시간 0.022초

AE 계측에 의한 고온용 흑연재료의 경함측정에 관한 연구 (Defect Measurement of Graphites for High Temperature Application by AE Technique)

  • 최만용
    • 한국정밀공학회지
    • /
    • 제9권2호
    • /
    • pp.122-127
    • /
    • 1992
  • In this study, we investigated defects of graphite by three NDT methods which are ultrasonic testing at 5 MHz, micro-forused X-ray testing and AE testing. As the detection of AE signals generated from graphite tensile specimens, we calculated location of AE sources and compared them with UT and X-ray test results in detecting defects of several specimens, Acoustic emission testing could be applied to some graphites which have fine grains of a few tens of micrometer, but it was difficult to those in lager grain of few fo milimeter. Also, we could understand what kind of defects has affected on tensile fracture of graphite.

  • PDF

초음파 시뮬레이션을 이용한 최적의 탐상조건 (Optimal Test Condition by Ultrasonic Simulation)

  • 허선철;박영철;부명환;강정호
    • 한국해양공학회지
    • /
    • 제13권4호통권35호
    • /
    • pp.45-54
    • /
    • 1999
  • Non destructive test is applied to revise mechanical strength and assume material strength or defect of material, equipment and structure, instead of fracture test. Especially, ultrasonic test has the characteristics such as an excellent permeability high-sensitiveness to fine defect and an almost exact measurement for position, size and direction of inner defect which differ from other non destructive tests. In this study, the program is developed to evaluate optimal testing condition, to distinguish obstacle echo and defect position. This program on the basic of Ray-Tracing model shows generation and processing of ultrasonic pulse. The simulation is compared with testing in the 3 cases of an oblique angle transducer like $45^{\circ},\;60^{\circ}\;and\;70^{\circ}$. The test result for all conditions is well compared with simulation result when relative not is within $0.1{\sim}7.2%$. And the course of several echos is simply assumed through simulation.

  • PDF

SOME EVIDENCE REGARDING REPAIRING, RECOVERY AND OVER-COMPENSATING PROCESSES DURING ONTOGENESIS, AFTERX-RAY-IRRADTATION OF BEAN SEEDS

  • Korosi, F.;Jezierska-Szabo, E.;Laszlo, P.;Felfoldi, J.
    • 한국유기농업학회지
    • /
    • 제3권1호
    • /
    • pp.11-22
    • /
    • 1994
  • Exposing plant organs to high doses of ionizing irradiation, penetrating into the plant tis-sues and cells, along the track structure of particles, lesions, and sublesions are formed on the molecules and organelles. As a result, disorders in the growth and development as well as chlorophyll-deficiency symptoms occur. The time scale of their reparation, recovery and over compensation during ontogenesis, constitutes a question of high theoretical and practical importanced, with special regard to nuclear fallout. With an aim to model the “ut supra”stated phenomena, the seeds of bean, Echo elit licensed variety, were irradiated by 300 Gy dose of X-ray-irradiation (120 kV:4.5 mA). According to the data obtained, the biosynthesis of photosynthetic pigments, will have been completed by the beginning of flowering. In consequence of the overcompensation of the repairing processes, the organs of plants developed from irradiated seeds, showed a partly differing correlative growth, compared to those of control plants. In order to characterize the vivo response of radiation-injured plants, a new method and approach were used. The changes of the electric capacitance of the plants during their ontogenesis, were continously monitored and recorede via a computer-aided and controlled measurement. In view of the data collected in such a way, the repairing plants may respond more quickly and intensively to the changes of environmental factors.

  • PDF

데드리프트와 업라이트로우 시 운동강도에 따른 근활성도 평가 (Evaluation of Muscle Activity according to Exercise Intensity during the Deadlift and Upright Row)

  • Cho, Won Jun;Song, Ju Won;Choi, Myung Soo;Kim, Nam Yim;Kim, Ryong;Lee, Chang Min;Hong, Jae Heon;Kang, Gun Woo;Moon, Young Jin
    • 한국운동역학회지
    • /
    • 제31권4호
    • /
    • pp.270-275
    • /
    • 2021
  • Objective: The purpose of this study was to evaluate 16 muscles activity according to three exercise intensity when performing Deadlift and Upright row. Method: To accomplish the purpose of the study, subjects (n=10) were performed Electromyography (EMG) measurement for 16 different muscles. The experimental movements were Deadlift and Upright row, measured five times for each intensity (40%, 60%, 80%) of 1RM. This study normalized the EMG values through RVC for comparative analysis. Results: The results were summarized as follows: As a result of Deadlift, there was significant difference in the mean EMG value according to the exercise intensity in all muscles except RA, PM and BB (p<.05). As a result of Upright row, There was significant difference in the mean EMG value according to the exercise intensity in all muscles except BF, TA, GN, RA and UT (p<.05). Conclusion: This study allowed us to know the activities of major muscles according to the exercise intensity for 16 different muscles when performing Deadlift and Upright row.

초음파 적외선 열화상을 이용한 마찰교반용접부의 결함 검출 (Using ultrasound infrared thermography to detect defects in lap joint Friction stir welding)

  • 박희상;최만용;박정학;이영호;최원용;고준빈;최원두
    • 대한용접접합학회:학술대회논문집
    • /
    • 대한용접접합학회 2009년 추계학술발표대회
    • /
    • pp.67-67
    • /
    • 2009
  • 알루미늄 합금 재질은 무게의 경량화와 기계적강도가 우수하며 다른 비철금속에 비하여 값이 저렴한 장점이 있다. 현재 산업현장에서 활용하는 가장 흔한 접합법으로 TIG, RSW 등과 같은 용융 용접법을 현재는 많이 사용 하고 있지만 열전도도가 높아 열 확산이 빠르고, 이에 따라 모재의 팽창이 일어나 열변형을 유발하며, 산화피막은 그 내부에 함유된 결정수가 아크용접 중 분해되어 수소를 방출함으로 기공이 발생하여 부도체로 저항용접시 전도성을 방해하는 등의 문제를 발생시킨다. 또한 철에 비해 4배정도 큰 전기전도율에 따라 저항용접시 대전류를 사용해야 하는 등의 문제점이 발생하고 있다. 이와 같은 알루미늄 합금의 용융용접 과정에서 발생하는 단점을 극복하는 기술로 고상접합 방법인 마찰교반용접법(Friction Stir Welding)이 활용되고 있다. FSW는 1991년 영국의 TWI에서 개발된 최신 용접법으로 모재를 용융점 아래에서 고상용접시키는 방법으로 용융에 따른 열변형과 흄가스(hume gas)와 스패터(spatter)를 억제시켜 주는 친환경적인 용접법이다. 이러한 마찰교반용접의 기술은 그동안 특허에 따른 로열티가 산업현장에서 사용하는데 문제가 되었으나 특허보호 기간인 20년이 1년정도의 기간밖에 남지 않은 상황에서 그 사용은 날로 증가하리라 본다. 이러한 마찰교반용접부의 결함을 평가하는 방법에는 UT, RT 등이 활용되고 있으나 얇은 박판에서의 결함검출은 용이하지 않다. 이리한 문제점을 해결하기위하여 초음파 가진을 이용한 적외선 열화상 검출 기법을 이용하여 마찰교반용접부의 결함 검출 가능성을 연구하였다. 20kHz의 주파수를 400Watt로 가진시켜 겹치기(lap joint) 마찰교반용접이된 A6061-T6의 용접부에 초음파를 입사하였을 때 발생하는 열을 적외선 열화상 카메라를 이용하여 측정함으로써 마찰교반겹치기 용접부의 결함 검출에 활용하였다. 용접부에 초음파를 입사하였을 때 부분적으로 온도차이가 발생하였고, 그에 따른 열화상을 검출 할 수 있었다. 이러한 열화상과 실제 시험편의 용접부의 강도를 평가하기 위하여 인장시험을 하였다. 그 결과 초음파 적외선 열화상 검출에서 발열부위가 나타난 부분이 인장시험에서 낮은 인장강도를 보였다.

  • PDF

The Effect of Promoters Addition on NOx Removal by $NH_3$ over V$V_2O_5/TiO_2$

  • Lee, Keon-Joo
    • Journal of Korean Society for Atmospheric Environment
    • /
    • 제18권E1호
    • /
    • pp.29-36
    • /
    • 2002
  • The selective catalytic reduction (SCR) reaction of promoter catalysts was investigated in this study. A pure anatase type of TiO$_2$ was used as support. Activation measurement of prepared catalysts was practiced on a fixed reactor packing by the glass bead after filling up catalysts in 1/4 inch stainless tube. The reaction temperature was measured by K-type thermocouple and catalyst was heated by electric furnace. The standard compositions of the simulated flue gas mixture in this study were as follows: NO 1,780ppm, NH$_3$1,780ppm, $O_2$1% and $N_2$ as balance gas. In this study, gas analyzer was used to measure the outgassing gas. Catalyst bed was handled for 1hr at 45$0^{\circ}C$, and the reactivity of the various catalyst was determined in a wide temperature range. Conversion of NH$_3$/NO ratio and of $O_2$ concentration was practiced at 1,1.5 and 2, respectively. The respective space velocity were as follows . 10,000, 15,000 and 17,000 hr-1. It was found that the maximum conversion temperature range was in a 5$0^{\circ}C$. It was also found toi be very sensitive at space velocity, $O_2$ concentration, and NH$_3$/NO ratio. We also noticed that the maximum conversion temperature of (W, Mo, Sn) -V$_2$O$_{5}$/TiO$_2$ catalysts was broad. Specially WO$_3$-V$_2$O$_{5}$TiO$_2$2 catalyst appeared nearly 100% conversion at not only above 30$0^{\circ}C$ ut also below 25$0^{\circ}C$. At over 30$0^{\circ}C$, NH$_3$ oxidation decreased with decrease of surface excess oxygen. In addition, WO$_3$-V$_2$O$_{5}$TiO$_2$ catalyst did not appear to affect space velocity, $O_2$ concentration, and NH$_3$/NO ratio.ratio.

간단한 위치검출기를 이용한 SRM 가변속 디지털 제어시스템 개발 (Development of Variable Speed Digital Control System for SRM using Simple Position Detector)

  • 천동진;정도영;이상호;이봉섭;박영록
    • 전력전자학회논문지
    • /
    • 제6권2호
    • /
    • pp.202-208
    • /
    • 2001
  • 스위치드 리럭턴스 모터(Switched Relutance Motor : 이하 SRM)는 이중 돌극형으로 되어있으며, 상권선은 고정자만 사용한다. 다른 어느 전동기보다도 간단한 구조를 가지고 있어 제작단가가 저렴하고, 기계적으로 견고하며, 고온 등의 열악한 환경에서도 신뢰성이 높으며, 브러쉬 등이 없어 유지비가 거의 들지 않는 장점을 지니고 있다. 그러나 SRM은 상여자를 위하여 회전자의 위치정보를 알아야하므로 위치 검출기가 필요하고, 정속도 운전을 위하여 타코 발전기나 엔코더가 부가적으로 필요하다. 그러나 본 논문에서는 회전자의 속도측정을 얻기 위하여 고가의 엔코더를 사용하지 않고, 단지 간단한 슬롯 디스크로부터 위치를 검출하여 속도를 추정할 수 있는 알고리즘을 제시하고 개발하였다. 속도 추정 알고리즘을 적용한 가변속 디지털 제어시스템을 구현하기 위하여 TI사의 TMS320F240-20MIPS 고정 소수점 연산용 프로세서를 사용하였다. 개발한 시스템을 실험한 결과 넓은 범위에 걸쳐 속도제어가 가능하였고, 단일 펄스모드, 하드 쵸핑모드 및 소프트 쵸핑모드 뿐만 아니라, 전류제어 동작모드에서 가변속 제어가 가능하였다. 그리고 어드밴스각 제어가 가능하였다.

  • PDF

퇴원환자의 가정간호요구와 가정간호사업의 효과 분석 - 일 종합병원을 중심으로 (A Study of Home Care Needs of Patients at Discharge and Effects of Home Care -Centered on Patients Discharged from a Rural General Hospilal-)

  • 최연순;김대현;서미혜;김조자;강규숙
    • 대한간호
    • /
    • 제31권4호
    • /
    • pp.77-99
    • /
    • 1992
  • The study was carried out at W. hospital, an affiliated hospital of Y university, involved a total of 163 patients who were discharged from the hospital between May 1990 und March 199J. Data collection was twice, just prior to discharge and a minimum of three months post discharge. Thirty patients who lived within a hour travel time of the hospital received home care during the three months post discharge. Nursing diagnoses and nursing interventions For these patients were analyzed in this study. The results of the study are summarized as follows : 1. Discharge needs for the subjects of the study were analyzed using Gordon's eleven Functional categories and it was found that 48.3% of the total sample had identified nursing needs. Of these, the needs most frequently identified were in the categories of sexuality, 79.3 %, health perception, 68.2 % self concept, 62.5 %, and sleep and rest 62.5 %. Looking ut j he nursing diagnosis that were made for the 30 patients receiving home care, the following diagnoses were the most frequently given; alteration in sexual pattern 79.3%, alterations in health maintenance, 72.6%, alteration in comfort, 68.0%, depression, 64.0%, noncompliance with diet therapy, 6.3.7%, alteration in self concept, 55.6%, and alteration in sleep pattern, 53%. 2. In looking at the effects of home nursing care as demonstrated by changes in the functional categories over the three month period, it was Found that of the 11 functional categories, the need level for health perception, nutrition, activity and self concept decreased slightly over the three month period. On the average sleep patterns improved, but restfulness was slightly less and bowel elimination patterns improved but satisfaction with urinary elimination was slightly less. On the other hand, role enactment, sexuality, stress management and spirituality decreased slightly. The only results that were statistically significant at the 0.05 level were improvement. in digestion and decrease in pain. No statistically significant changes were found in ability related to ADL, the total ADL Score at discharge was $19.78{\pm}8.234, and after 3 months $19.01{\pm}8.12$. Considering that a majority of the patients were over 60 years of age and that many had brain or spinal cord injuries, the fact that their ADL ability did nor deteriorate after discharge can be interpreted as related to a positive impact by the home health care nurses. Similarly there was a slight be not statistically significant decrease in the quality of life scores between the two lest times(l47.83 at discharge and 113.02 at the three month period). Again, when the chronic nature of thee problems facing these patients is considered this maintenance of quality of life can be interpreted as a positive impact by the home health care nurses. 3. One of the home care nursing activities was diagnosis. For this activity it was found that for nine functional health categories(sexuality and spirituality excepted) there were 20 nursing diagnoses. The most frequent were noncompliance, alteration in skin integrity both actual and potential, and impaired physical mobility in that order. 4. Delivery of home health care by the home health nurses included the following nursing activities; assessment, patient education, demonstration of care activities, counselling, direct care to the patient and referrals. Direct care included changing dressings, bladder irrigations, changing Foley catheters, measurement of residual urine, perineal care, position change, back care, oral hygiene, exercise and massage of motion exercises, cleansing enemas, tracheostomy suctioning and tracheostomy care, care of dentures, applications of heat and other similar nursing activities. In conclusion almost 50% of (he sample indicated a need for continued nursing care at the time of discharge and for the patients in the sample who received home care there was a slight decrease in nursing needs but while the patients had chronic and debilitation problems there was ill decrease in ADL abilities or in quality of life. Further study needs Lo be done La increase the reliability and validity of the tool that was used to measure home health care needs. It is also recommended that study by done using a randomized sampling with a control group to compare patients who receive home care with those who do not.

  • PDF

산업여대학학생단대지간적령수산품개발화품패관리협작(产业与大学学生团队之间的零售产品开发和品牌管理协作) (Retail Product Development and Brand Management Collaboration between Industry and University Student Teams)

  • Carroll, Katherine Emma
    • 마케팅과학연구
    • /
    • 제20권3호
    • /
    • pp.239-248
    • /
    • 2010
  • 本文阐述了产业和学术之间的合作项目. 这个合作项目关注美国东北部的一家大型地区连锁百货商店的两个自有品牌服装的营销和产品开发战略发展. 这个项目的目标是通过和学生的想法的合作来振兴产品线. 从而给学生提供真实产业环境中的实践经验. 这个项目中有很多关键者. 在美国东北部的一家私有连锁百货商店为已有的两个自有服装品牌寻求一个学术伙伴. 他们的目标客户是追求休闲, 适中价格的中年消费者. 这个公司想要改变包装和展示的方向, 甚至是产品的设计. 公司的品牌和产品开发部门联系东北一个州立大学的学术部门的教授. 有两位教授认为这个项目非常适合他们的课程-一个是初级的媒介品牌管理课程; 一个是高级的时装产品开发课程. 这些教授认为通过合作项目, 学生在安全的学术学习环境中能进入一个真实的工作场景中在一个多学科协作团队, 提供超出一个学生的能力, 经验和资源优势, 并增加了解决问题的过程中的 "智囊" (Lowman 2000). 这种提高学生的能力目标的方向让每班教师去组织品牌和产品开发类的跨学科团队. 此外, 许多大学都聘请科研和教学的产业伙伴关系, 协作的时间(学期)和环境(教室/实验室)的约束有助于提高学生的知识和对现实世界的经验. 在田纳西大学, 产业服务中心和UT-Knoxville's 工学院和一家公司合作来发展它们美国公司的的设计进步. 本研究中, 因为是和一个自有商标零售品牌, Wickett, Gaskill 和Damhorst's (1999) 指出产品开发和品牌管理团队使用的零售服装产品开发模型. 之所以选择这个框架是因为它从零售这个角度强调了服饰产品开发. 两个班级参与了这个项目: 一个初级品牌管理班级和一个高级时装产品开发班级. 7个团队包括四名学习品牌管理的学生和两名学习产品开发的学生. 这两个课程在同一个学期但是不同的时间. 在学期开始的时候, 每个班级都被介绍给了产业合作伙伴并接受了问题. 一半的团队指定为男士品牌, 另一半是女士品牌. 这些小组负责制定解决问题的方法, 制定自己的工作时间表, 在与业界代表保持接触, 并确保每个小组成员以积极的方式负责任. 这些小组的目标是通过用销售规划进程来计划, 发展和展示一条产品线(遵循Wickett, Gaskill和Damhorst 模型) 并为这条产品线发展新的品牌战略. 这些小组展示了趋势, 色彩, 面料和目标市场调查; 制定一个产品线的草图;编辑了草图, 介绍他们的执行计划书写说明书, 配上合适的模型并最终开发生产样品. 品牌班的学生完成了SWOT分析, 品牌测量研究报告, 品牌心智图和完整综合的营销报告. 这些报告在介绍新产品线时同时发表. 将来如果有更多这样的协作机会而且公司希望同时考虑品牌和产品开发战略, 那么课程应该定在相同的时间, 这样学生有更多的时间在一起讨论时间表和被分配的任务. 像上面的任务, 学生不得不每堂课之外的时间见面. 这使得团队工作变得具有挑战性(Pfaff和Huddleston, 2003). 虽然这项工作的后勤是费时设立和管理, 但教授认为对学生的好处是多种多样的. 根据两堂课的学生的回复, 最重要的好处是和产业专业人士一起工作的机会, 跟进他们的进程, 并看到公司里做决定级别的高层对他们作品的评估. 教员们都感激有一个 "真实的世界" 的案例. 制定的创意和战略扩大和加强了品牌和产品开发两个部门的联系. 通过和来自不同知识领域的学生一起工作并且和产业伙伴联系, 遵守产业活动的框架和时间表, 学生小组在新的环境中完成优秀创新的作品是具有挑战性的. 在产品开发和为 "现实生活" 品牌的品牌工作, 这些品牌都在努力给学生一个机会, 看看他们的课程是如何紧密的与现实世界联系, 以及公司运营中设计和商业方面如何需要创造性, 协作和灵活性. 行业人员对(a)学生的知识水平和深度以及执行力, (b)品牌的新思路的创造性产生了深刻的印象.