• 비파괴검사학회지
• /
• 제25권6호
• /
• pp.483-486
• /
• 2005

The relationship between the EFBH (Equivalent Flat-Bottom Hole) size measured by non-destructive method and the actual size by destructive method in many rotors manufactured at Doosan Heavy Industries & Construction Co. Ltd. was investigated. In this investigation. "the Master Curve" compensating the differences between UT reported sizes and actual sizes of defects in our rotor forgings were obtainable. The applicability of this "Master Curve" as a way of calculating the actual defect size was also investigated. For the evaluation of rotor forgings, it is expected that this "Master Curve" may be used to determine the accurate actual sizes of defects.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2004년도 춘계 학술발표대회 개요집
• /
• pp.118-120
• /
• 2004

The non-destructive examinations for Yonggwang unit 6 was conducted in four different fields, these are 1)all non-destructive inspections for components, piping weldments and structures, 2)automated ultrasonic inspection for pressure vessels weldments. As the results, there were no big indications, and all indications detected during inspection were evaluated as the metallurgical and geometrical non-reinvent indications form weldments. Especially for the weldment of pipes, PD(Performance Demonstration) was applied as a UT inspection method according to 1995 edition of ASME code Sex. XI, this resulted in improvement of the reliability of UT inspection.

• 천문학회보
• /
• 제43권1호
• /
• pp.58.3-59
• /
• 2018

We present the results of high resolution spectral analysis for Type Ia supernova SN 2014J in M82, which was discovered on 21 January 2014 UT. We performed spectroscopic observations for SN 2014J in its early phase at Bohyunsan Optical Astronomy Observatory with the high resolution echelle spectrograph BOES attached to 1.8-m reflector. Spectra of 26 epochs in 6 nights were obtained from 22 January 2014 to 23 February 2014 UT. Spectral feature variations for several significant lines including Si II and Ca II lines will be shown and discussed.

• 한국공작기계학회논문집
• /
• 제15권2호
• /
• pp.87-92
• /
• 2006

This paper supplements shortcoming of radioactivity check by detecting defect of SWP weld zone using ultrasonic wave. Manufacture 2 stage robot detection systems that can follow weld bead of SWP by method to detect weld defects of SWP that shape of weld bead is complex for this as quantitative. Also, through signal processing ultrasonic wave defect signal system of GUI environment that can grasp easily existence availability of defect because do videotex compose. Ultrasonic wave signal of weld defects develops artificial intelligence style sightseeing system to enhance pattern recognition of weld defects and the classification rate using neural net. Classification of weld defects that do fan Planar defect and that do volume defect of by classify.

• 통상정보연구
• /
• 제10권3호
• /
• pp.101-116
• /
• 2008

Future e-Trade RFID/USN distribution should satisfy the new needs of reasonable customers such as efficient supply of goods, presentation of information, and communication by developing intermediate and long-term strategies through analysis of industrial conditions and customers' needs. Through preferential application of new technology, knowledge-based e-Trade RFID/USN distribution environment and DB of industrial portal sites should be developed, RFID/USN infra such as Supply Chain Management(SCM) should be expanded, future-oriented knowledge-based services should be developed to prepare specific and realistic plans for proper UT(Ubiquitous Technology). Such change in e-Trade distribution environment should have historical and environmental backgrounds to suggest specific tasks and directions as a conversion of structural concept of engineering and trade theory for new u-Trade. Accordingly, this study is to present all the problems available in RFID/USN distribution, develop an organized and technological estimate model and provide a foundation to apply it efficiently. This study aims to present an interpretational foundation of RFID/USN distribution, rather than technical directions.

• Journal of Astronomy and Space Sciences
• /
• 제17권2호
• /
• pp.141-146
• /
• 2000

Some observational features on the July 5, 1995 substorm event are presented using the data from the Geotail satellite which was located at near-Earth plasma sheet, ${X}_{GSE}$ ∼ $-9.6R_{E}$, and quite close to the onset sector. Near-tail magnetic field reveals the typical dipolarizations starting ar ∼ 11-4 UT until ∼ 1113 UT. During the interval, two dipolarizations occur: First dipolarization is not strong and accompanies only weak(<150km/s) earthward/dawnward plasma flows, and in the second dipolarization that follows shortly, rather large amplitude magnetic fluctuations are seen, but it initiates with no significant earthward flow. The earthward bursty flow with a maximum speed of > 450km/s was observed, but delayed by ∼ 1 min with respect to the second dipolarization initiation. These features are in conflict with the flow-braking scenario for the substorm. Rather they fit better in the near-tail current disruption scenario.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.348-352
• /
• 1995

In the conventional linear elasticity, ultrasonic velocity is determined by elastic modulus and density of te medium which ultrasonic wave propagates through. But, practical ultrsonic wave depends on the stress acting in the medium, and as the stress increases such dependency becomes nonlinear. This nonlinear dependencyof ultrasonic velocity on stress can be identified by using nonlinear elastic modulus up to 4th order. In thid paper, with the above background relationships between nonlinear elastic modulus and the internalstatus of materials, normal, plastic deformed or heat stressed, are discussed. For this purpose, a new type of measuring system extended from the general nondestructive UT(ultrasonic test) equipment is constructed.

• Childhood Kidney Diseases
• /
• 제11권2호
• /
• pp.145-151
• /
• 2007

Hypertonicity (hypernatremia) of extracellular fluid causes water movement out of cells, while hypotonicity(hyponatremia) causes water movement into cells, resulting in cellular shrinkage or cellular swelling, respectively. In most part of the body, the osmolality of extracellular fluid is maintained within narrow range($285-295 mOsm/kgH_2O$) and some deviations from this range are not problematic in most tissue of the body except brain. On the other hand, the osmolality in the human renal medulla fluctuates between 50 and $1,200 mOsm/kgH_2O$ in the process of urine dilution and concentration. The adaptation of renal medullary cells to the wide fluctuations in extracellular tonicity is crucial for the cell survival. This review will summarize the mechanisms of urine concentration and the adaptation of renal medullary cells to the hyper tonicity, which is mediated by TonEBP transcription factor and its target gene products(UT-A1 urea transporter etc.).

• Journal of Welding and Joining
• /
• 제35권2호
• /
• pp.63-70
• /
• 2017

As the Non Destructive Test (NDT) for the welded structure, PT(Penetration Test). MT(Magnetic Test), RT (Radioisotope Test) and UT(Ultrasonic Test) methods are widely used in practice. These NDT methods have been developed toward high efficiency, low cost, real time, and high precise new NDT. For example, RT methods are developed to CT(Computed Tomography)and DR(Digital Radiography), and UT metheds are developed into Phased array, Guide wave, TOFD method. Moreover, the Infrared thermography and Laser ultrasonic technique are newly developed for applying in high temperature objects as the non-contact NDT methods. In this review paper the new high efficiency NDT methods for the welded structure are introduced and the trend of NDT rules applying in welded structure are described.

• Corrosion Science and Technology
• /
• 제15권6호
• /
• pp.320-325
• /
• 2016

To perform ultrasonic testing (UT) thickness measurement of the secondary side piping installed in nuclear power plants, the insulation for preventing heat loss should be removed. The type of insulation can be divided into fixed and removable insulation. Fixed and removable insulation have their own strengths and weaknesses. Removable insulation has been installed in the components susceptible to wall thinning caused by FAC and erosion from Shin-Kori unit 1, which commenced its commercial operation in 2011. In this paper, the number of repeated inspections of components and the number of replacements of fixed insulation were estimated and a more economical way was identified based on the manufacturing and installation costs for fixed and removable insulation.