• 제목/요약/키워드: US(Ultrasonic wave)

검색결과 6건 처리시간 0.026초

튀김 닭고기 가슴살의 품질에 영향을 미치는 초음파 주사 효과 (Effects of Ultrasonic Waves Scanning on the Quality of Fried Chicken Breast)

  • 정인철;문윤희;박경숙;윤동화
    • 동아시아식생활학회지
    • /
    • 제16권2호
    • /
    • pp.192-198
    • /
    • 2006
  • This study was carried out to investigate the effect of ultrasonic wave scanning on the quality of fried chicken breast. The ultrasonic wave scanning time was 0(US-0), 3(US-3), 7(US-7) and 10(US-10) minutes, no respective comparison here. The moisture of raw breast was higher than that of flied chicken, while the crude protein, fat and ash of fried chicken were higher than those of raw breast(p<0.05). The moisture content was influenced by the ultrasonic waves scanning, but the crude protein, fat and ash were not. The $L^*$(lightness) and $b^*$(yellowness) values of fried chicken were higher than those of raw breast but the $a^*$(redness) value of raw breast was higher than that of fried chicken. The $L^*$ value was lowest in US-0, while the $a^*$ value was not significantly different and the $b^*$ value was lowest in US-7 among the fried chicken samples(p<0.05). The fried chicken was not influenced by the ultrasonic wave scanning, indicating that the longer scanning time increased the water holding capacity. The pH ranged from 6.54 to 6.93, and the calorie of fried was higher than that of raw breast, but was not influenced by the ultrasonic wave scanning time. The VBN content ranged from 8.73 to 12.3 mg%. The TBARS value of raw breast was lower than that of flied chicken and was not influenced by the ultrasonic wave scanning time. Total amino acid was highest in raw breast and lowest in US-3(p<0.05). The taste, texture and juiciness were superior with increasing scanning time, but flavor and Palatability were not significantly different among the fried chicken samples(p<0.05).

  • PDF

Recognition of Object Position by use of Aerial Ultrasonic Sensor

  • Kashiwagi, H.;Kaba, K.;Yamaguchi, T.
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1998년도 제13차 학술회의논문집
    • /
    • pp.70-74
    • /
    • 1998
  • This paper describes a method for recognition of two-dimensional position of an object by use of aerial ultra-sonic sensor and signal processing technique, which would become a help for blind person or self-mobile robot. First, we have developed a method for measuring the time difference between the transmitted and the received burst wave by use of one ultrasonic transmitter and three receivers. Secondly, a new method is developed for measuring the distance to an object by use of M-sequence correlation method. Thirdly, a measurement method to obtain the position of an object is described by use of phase-arrayed ultrasonic sensor, which gives us a wide-range position determination in a short time.

  • PDF

음향 벽을 이용한 배열형 압전형 초음파 변환기의 음향 간섭 수준 감소를 위한 연구 (A Study for Reducing the Acoustic Cross Talk Level in an Array Type Piezoelectric Ultrasonic Transducer Using Acoustic Wells)

  • 김영신;노용래
    • 한국음향학회지
    • /
    • 제22권3호
    • /
    • pp.208-216
    • /
    • 2003
  • 의료 진단용으로 널리 사용되는 1차원 배열형 압전 초음파 변환기는 소자들간의 음향 간섭에 의해 성능이 저하된다. 본 연구에서는 기존의 커프로 효과를 볼 수 없는 변환기 표면을 따라 전파하는 음파로 인한 간섭을 감소하기 위해 음향 벽 설치를 제안하고, 유한 요소 해석법을 이용하여 convex 1차원 배열형 압전 초음파 변환기에 설치한 음향 벽의 형상. 크기 및 재질에 따른 음향 간섭 수준을 분석하였다. 시뮬레이션 결과는 소자들간의 음향 간섭을 최소화하는 초음파 변환기의 최적화 설계를 위해 매우 유용한 정보로 사용될 것으로 기대된다.

표면파를 이용한 자동 초음파탐상검사 주사장치의 위치제어 기술 (Position Control Technique of Ultrasonic Scanner for an Automated Ultrasonic Testing Using Surface Wave)

  • 이종포;박철훈;엄병국
    • 비파괴검사학회지
    • /
    • 제23권1호
    • /
    • pp.30-37
    • /
    • 2003
  • 수동 초음파검사를 자동검사로 대체하기 위해서는 탐촉자의 위치정보를 정확하게 제어할 수 있는 주사장치가 필수적이다. 위치정보를 알기 위하여 기존의 모터제어 주사장치에서는 엔코더를 사용하고 있으며 엔코더는 여러 가지 측면에서 많은 장점을 가지고 있으나 주사 중에 미끄러짐(slip)이 발생하면 엔코더 위치정보의 정확도에 많은 오차가 포함되게 된다. 따라서, 미끄러짐이 있는 경우의 위치정보는 무의미하게 되며, 자동초음파검사의 신뢰도는 큰 문제가 된다. 그러므로 미끄러짐을 피해야 하나 현재는 이를 완전히 해결하는 방법은 없는 상태이다. 본 논문에서는 이와 같은 문제점을 해결하고 엔코더를 대체할 수 있는 새로운 개념의 초음파검사 자동 주사장치의 위치 제어기술을 제안하고 이 방법이 실제 사용 가능함을 확인하였다 즉, 주사하고자 하는 직선 영역에 송신용 표면파 탐촉자를 부착하고 주사장치에 부착된 수신용 탐촉자에서 표면파를 수신하여 현재의 주사장치의 위치를 계산하고 이를 바탕으로 주사하고자 하는 거리만큼의 주사장치의 이동을 제어할 수 있다.

초음파 반사 패턴과 주파수 대역 분할 신호처리를 이용한 다층구조인 노내 간극 측정 (Multi-layered Gap Measurement on In-Vessel Cerium Retention Using Ultrasonic Wave Reflective Pattern Analysis and Frequency Diversity Signal Processing)

  • 구길모;심철무;김종환;김상백;김희동;박치승
    • 비파괴검사학회지
    • /
    • 제20권4호
    • /
    • pp.314-321
    • /
    • 2000
  • 모의 원자로내 용융물 냉각 실증 실험 결과 용융물 $Al_2O_3/Fe$ thermite 와 lower head vessel사이에 간극이 발생된다. 간극을 정량적으로 측정하기 위한 기존의 초음파 방법은 구조물의 복잡성과 $2300^{\circ}C$ 에서 용융되는 thermite $Al_2O_3/Fe,\;Al_2O_3$의 영향으로 발생되는 lower head의 열영향부위(HAZ)의 금속학적인 결정입자 크기의 변화로 결정 계면으로부터 발생되는 잡음신호와 초음파 산란, 감쇠, 모드 변환 등이 발생되어 신뢰성이 떨어지고 있다. 간극을 정량적으로 측정하기 위해서 thermite와 lower head 사이에 물이 채워진 형태의 즉 고체, 액체, 고체의 다층구조에서 초음파의 진행 및 반사 형태를 분류 및 분석하였다. 결정립의 잡음을 억제하기 위하여 주파수대역의 확률 처리 방식인 PT(polarity threshold) 알고리즘을 이용하여 약 6dB 신호 대 잡음비의 개선효과를 가져왔다.

  • PDF