• Journal of Oral Medicine and Pain
• /
• 제22권1호
• /
• pp.95-109
• /
• 1997

The purpose of this research is to investigate the influence on mandibular movements and TMJ sounds with changes of head and neck posture. For the research, twenty patients who had complained of TMJ sounds without any other symptoms of cranio-mandibular disorders, were selected as subjects for measurements of TMJ sounds, and radiographs on transcranial view of TMJ were taken on ten of the subjects. From NHP, UHP, DHP and FHP, aspects of mandibular movement and TMJ sound were investigated from each posture. Aspects of mandibular movement and TMJ sound were observed by measuring total vibration energy(Integral), peak amplitude, maximum amound of mouth opening, and TMJ sound-emitting point using Sonopak for windows (version 1.33) and Bio-EGN(Bioresearch Inc. WI. U.S.A.). Head and neck movement-measuring instrument, CROM(perfomance attainment Inc. U.S.A.) was to maintain even head posture. Degrees of inclination of UHP and DHP were determined at 30' and distance of FHP was 4cm. The results obtained were as follows. 1. Total vibration energy and peak amplitude of TMJ sounds were decreased more on UHP and on UHP and increased more on DHP and FHP than that on NHP. 2. At the maximum mouth opening, distance of TMJ sound-emitting point were decreased more on UHP and increased more on DHP and FHP than that on NHP. 3. The amounts of the maximum mouth opening were increased more on UHP and decreased more on DHP and FHP than that on NHP. 4. For the changes of the head posture with mouth opening observed in radiograph, condylar head was positioned more lower-anteriorly on UHP, and more upper-posteriorly on DHP and FHP than that on NHP. From the results obtained as above, considering positive influence of the change of head and neck posture, avoiding down-head and forward-head posture, and recommending upper- head posture can prevent the progress of temporomandibular disorder and lead to successful treatment for the patients with temporomandibular joint sounds.

• Nuclear Engineering and Technology
• /
• 제51권2호
• /
• pp.588-599
• /
• 2019

This research presents a structural design of high-level waste (HLW) container using ultra-high performance fiber reinforced concrete (UHP-FRC) material. The proposed design aims to overcome the drawbacks of the existing concrete containers which are heavy, difficult to fabricate, and expensive. In this study, the dry storage container (DSC) that commonly used at Canadian Nuclear facilities is selected to present the proposed design. The design has been performed such that the new UHP-FRC alternative has a structural stiffness equivalent to the existing steel-concrete-steel container under various loading scenarios. Size optimization technique is used with the aim of maximizing stiffness, and minimizing the cost while satisfying both the design stresses and construction requirements. Then, the integrity of the new design has been evaluated against accidental drop-impact events based on realistic drop scenarios. The optimization results showed: the stiffness of the UHP-FRC container (300 mm wall thick) is being in the range of 1.35-1.75 times the stiffness of existing DSC (550 mm wall thick). The use of UHP-FRC leads to decrease the container weight by more than 60%. The UHP-FRC container showed a significant enhancement in performance in comparison to the existing DSC design under considered accidental drop impact scenarios.

• Computers and Concrete
• /
• 제30권5호
• /
• pp.339-355
• /
• 2022

The high cost of ultra-high-performance engineered cementitious composite (UHP-ECC) is currently a crucial issue, especially in terms of the polyethylene (PE) fibers use. In this paper, cheap calcium carbonate whiskers (CW) were evaluated on the feasibility of hybrid with PE fibers. Diverse combinations of PE fibers and CW were employed to investigate the multi-scale enhancement on the UHP-ECC performance. A probabilistic-based UHP-ECC tensile strain reliability analysis approach was utilized, which was in general agreement with the experimental results. Furthermore, a multi-dimensional integrated representation was conducted for the comprehensive assessment of UHP-ECC. Results illustrated that CW improved the compressive strength and energy dissipation capacity of UHP-ECC owing to the microscopic strengthening mechanism. CW and PE fiber further promoted the saturated cracking of composite by multi-scale crack arresting effect. In particular, PE1.75-CW0.5 specimen possessed the best overall performance. The ultimate cracking width of PE1.75-CW0.5 group had 98 ㎛, which was 46.18% lower compared to PE2-CW0 group, the 28d compressive strength were slightly improved, the tensile strain capacity was comparable to that of PE2-CW0 group. The results above demonstrated that combinations of PE fiber and CW could significantly enhance the comprehensive performance of UHP-ECC, which was beneficial for large-scale engineering applications.

• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 2004년도 춘계 학술발표대회 논문집
• /
• pp.336-337
• /
• 2004

• Advances in concrete construction
• /
• 제8권1호
• /
• pp.21-31
• /
• 2019

The rich recipe of ultra high performance concrete (UHPC) offers the higher mechanical, durability and dense microstructure property. The variable like cement/sand ratio, amount of supplementary cementitious material, water/binder ratio, amount of fiber etc. alters the UHPC hardened properties to any extent. Therefore, to understand the effects of these variables on the performance of UHPC, inevitably a stage-wise development is required. In the present experimental study, the effect of sand/cement ratio, the addition of finer material (fly ash and quartz powder) and, hybrid fiber on the fresh, compressive and microstructural property of UHPC is evaluated. The experiment is conducted in three phases; the first phase evaluates the flow value and strength attainment of ingredients, the second phase evaluates the efficiency of finer materials (fly ash and quartz powder) to develop the UHPC and the third phase evaluate the effect of hybrid fiber on the flow value and strength of ultra high performance hybrid fiber reinforced concrete (UHP-HFRC). It has been seen that the addition of fly ash improves the flow value and compressive strength of UHPC as compared to quartz powder. Further, the usage of hybrid fiber in fly ash contained matrix decreases the flow value and improves the strength of the UHP-HFRC matrix. The dense interface between matrix and fiber and, a higher amount of calcium silicate hydrate (CSH) in fly ash contained UHP-HFRC is revealed by SEM and XRD respectively. The dense interface (bond between the fiber and the UHPC matrix) and the higher CSH formation are the reason for the improvement in the compressive strength of fly ash based UHP-HFRC. The differential thermal analysis (DTA/TGA) shows the similar type of mass loss pattern, however, the amount of mass loss differs in fly ash and quartz powder contained UHP-HFRC.

• Journal of Oral Medicine and Pain
• /
• 제21권1호
• /
• pp.89-101
• /
• 1996

This study was performed to investigate influence of the changes of head posture on resting electromyographic (EMG) activity in anterior temporalis, masseter, sternocleidomastoid muscle and trapezius, and on status of occlusal contacts. For this study twenty-nine patients with temporomandibular disorders(TMD) and thirty dental students without any masticatory symptoms were selected as patients group and control group, respectively. EMG activity($\mu$V) at rest was observed in four kind of head postures such as natural or normal head posture(NHP), forward head posture(FHP), upward head posture(UHP), downward head posture(DHP), and in NHP and FHP, EMG activity with flat occlusal splint was also checked. BioEMG$^\textregistered$(Bioelectromyograph, Bioresearch Inc., USA) was used to record EMG activity in the above four muscles with eight locations on both sides. The author used T-Scan$^\textregistered$(Tekscan Co., USA) system to investigate the changes of oclusal contats on clenching in the four head postures about number, force, time(duration) and total left-right statistis(TLR, occlusal stability crossing left-right dental arch on clenching). For taking in upward or downward head posture, head was inclined $10^{\circ}$ upward or downward and CROM$^\textregistered$ (cervical-range-of motion, Performance attainment Inc., USA) was used to maintain same posture during the procedure. The results obtained were as follows : 1. For resting EMG activity, anterior temporalis did not show any difference by change of head posture, but masseter and sternocleidomastoid muscle showed higher value of EMG activity in FHP and UHP, and trapezius showed higher value of EMG activity in FHP and DHP. 2. EMG activity of trapezius was higher than that of any other muscles in NHP, FHP, and DHP, but in UHP, the activity was the lowest reversely. 3. Patients group showed higher EMG activity than control group did in all the muscles in NHP. And significant difference between the two groups were also observed in anterior temporalis in FHP, in sternocleidomastoid muscle in UHP, and in sterno-cleidomastoid muscle and trapezius in DHP with higher activity in patients group. 4. There was no change of EMG activity in NHp with splint, but EMG activity in anterior temporalis and masseter was decreased in FHP with splint. 5. In general, status of occlusal contacts was not changed with head posture in all subjects, and difference between patients group and control group was only noted for number and force of tooth contact in UHP and DHP with more value in control group. 6. Correlationship between EMG activity and number ad force of tooth contacts was shown negatively with regard to masseter in NHP, and trapezius in UHP and DHP.

• Korean Journal of Radiology
• /
• 제22권11호
• /
• pp.1777-1785
• /
• 2021

Objective: To investigate the accuracy of the Agatston score obtained with the ultra-high-pitch (UHP) acquisition mode using tin-filter spectral shaping (Sn150 kVp) and a kVp-independent reconstruction algorithm to reduce the radiation dose. Materials and Methods: This prospective study included 114 patients (mean ± standard deviation, 60.3 ± 9.8 years; 74 male) who underwent a standard 120 kVp scan and an additional UHP Sn150 kVp scan for coronary artery calcification scoring (CACS). These two datasets were reconstructed using a standard reconstruction algorithm (120 kVp + Qr36d, protocol A; Sn150 kVp + Qr36d, protocol B). In addition, the Sn150 kVp dataset was reconstructed using a kVp-independent reconstruction algorithm (Sn150 kVp + Sa36d, protocol C). The Agatston scores for protocols A and B, as well as protocols A and C, were compared. The agreement between the scores was assessed using the intraclass correlation coefficient (ICC) and the Bland-Altman plot. The radiation doses for the 120 kVp and UHP Sn150 kVp acquisition modes were also compared. Results: No significant difference was observed in the Agatston score for protocols A (median, 63.05; interquartile range [IQR], 0-232.28) and C (median, 60.25; IQR, 0-195.20) (p = 0.060). The mean difference in the Agatston score for protocols A and C was relatively small (-7.82) and with the limits of agreement from -65.20 to 49.56 (ICC = 0.997). The Agatston score for protocol B (median, 34.85; IQR, 0-120.73) was significantly underestimated compared with that for protocol A (p < 0.001). The UHP Sn150 kVp mode facilitated an effective radiation dose reduction by approximately 30% (0.58 vs. 0.82 mSv, p < 0.001) from that associated with the standard 120 kVp mode. Conclusion: The Agatston scores for CACS with the UHP Sn150 kVp mode with a kVp-independent reconstruction algorithm and the standard 120 kVp demonstrated excellent agreement with a small mean difference and narrow agreement limits. The UHP Sn150 kVp mode allowed a significant reduction in the radiation dose.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2004년도 하계학술발표 논문집
• /
• pp.106-106
• /
• 2004

• 디지털콘텐츠학회 논문지
• /
• 제19권2호
• /
• pp.285-292
• /
• 2018

최신 ICT 기술은 4차 산업혁명의 핵심으로 향후 각종 산업발전의 교두보 역할을 담당할 것으로 예상되고 있으나 여전히 ICT기술의 격차가 빈부의 격차로 직결되며 그 격차는 더 벌어지고 있다. 개도국에서의 여성 ICT 역량 강화교육은 국가발전을 위한 양질의 인력을 양성할 수 있는 기회가 되고 기술격차를 해소할 수 있는 방안이라고 할 수 있다. 본 연구는 개도국의 학생들에게 교육을 통해 ICT 기술을 보급하기 위한 준비단계로서, 인도네시아의 UHP 대학의 인프라 및 ICT교육현황을 조사하고자 한다. 이에 근거하여 여대생들에게 적절한 ICT 교육콘텐츠를 개발하고 지속적인 교육을 위해 필요한 정책을 제언하고자 한다. 또한 기존연구인 Life 대학 설문조사 결과와 비교분석하여 교육의 효율성을 제고하는 교수법을 모색하고자 한다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1427-1429
• /
• 2008

In this paper, an illumination system design using two lamps was proposed to improve the brightness of the projector. The proposal is based on the results from optical simulation. The prism array was applied to maintain the same optical properties, such as brightness distribution for the divergence angle and the composed beam size of the system. These were compared to those of the one UHP lamp system. The brightness of the two-lamp system, having a panel size of 0.74" and an f/2.9, increased by a factor of 1.7 when compared to the brightness of one UHP lamp system.