• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.7
• /
• pp.731-738
• /
• 2007

Recently UHF RFID system has drawn a great deal of attention because of its potential to revolutionize supply chain management. In this article, RFID reader-to-reader interference is analyzed in terms of interrogation range. For evaluating RFID interference quantitatively, the new figure-of-merit, IRRR, is defined. In order to show the usefulness of IRRR, calculated IRRR is verified by measurement using two RFID readers and a tag in multiple-reader environment. IRRR can be referred to an important design parameter to analyze more complex interfering problems in actual RFID system deployments.

• The Journal of the Korea Contents Association
• /
• v.8 no.3
• /
• pp.18-24
• /
• 2008

This paper analyzed Air Interface of EPCglobal's Class-0 that is UHF band protocol among radio environment protocol standard that is used to RFID system. And embodied prescribed anticollision algorithm in protocol. Also, the improved anticollision algorithm for the Class-0 protocol is proposed and performances of anticollision algorithm are compared. Result that compare performance of standard algorithm through simulation with improved algorithm, improved Class-0 algorithm when is tag number 100, reduced 8%, and when is tag number 1000, 12.2%. According as tag number increases, total realization time of improved algorithm decreased more gradually better than prescribed algorithm. Therefore, the improved anticollision algorithm proposed in this paper is advanced method improving the performance of tag recognition in the RFID system and Ubiquitous sensor network.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.832-835
• /
• 2008

An information-oriented basis in today's society has been changing fast, and the desire for connectivity has caused an exponential growth in wireless communication and sensor network. Sensor networks using RFID, in particular, have led this trend due to the increasing exchange of data in Ubiquitous such as the home RF, access control system, U-Healthcare, and Logistics information Systems. Also, the RFID when it applies a technique, is able to raise the stability of shipping as controling the mobile course and an entrance and exit of the crews an well as previously preventing an accident from shipping. In this paper, we designed and implemented personnel control system using UHF-RFID in vessels which shows through host PC reading and writing tag.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.776-779
• /
• 2004

A RF front-end module is designed for GIS(Gas Insulated Substation) which is employed for effective and efficient very high voltage transmission. Major advantage of the unit is improved PO detection sensitivity through minimizing the effect of surrounding interference signals, which is achieved by controlling the gain and the selection of the frequency band, for the precise detection of any UHF PO (Partial Discharge) disturbance occurred in the GIS due to some unwanted problems. For the development of the module, various switches for providing selected signal paths, wideband LNA, 3 BPF for selecting detection frequency band, and video detector are designed, fabricated and measured on 1 mm FR4 substrate with various RF components. The detection sensitivity of the unit was <-60 dBm that is sufficient to detect UHF PO signals as low as 1 pC. It is believed that the value is enough to detect the signal occurred in GIS.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.381-384
• /
• 2005

If obstacle in GIS(Gas Insulted Switchgear), its affects are great are on the community and it is consequently demanded lots of difficulties to recover and repair. Accordingly, diagnosis techniques, that are able to prevent from accidents before they happen by providing more stable and highly reliable power effectively and finding sign of the accidents is very important A novel UHF(Ultra High Frequency)-microstrip antenna is presented. The measured impedance bandwidth of the proposed antenna is from 0.5[GHz] to 15[GHz] with the stop band from 0.5[GHz] to 10.7 [GHz] for VSWR<2. Form results of this study, The antenna is will play an important role for the sensor for insulation diagnosis system by UHF method of real site GIS and power equipment using SF$_6$ gas.

• Proceedings of the KAIS Fall Conference
• /
• 2007.05a
• /
• pp.192-194
• /
• 2007

본 논문에서는 금속체에 RFID 태그 안테나를 부착 시 태그 인식이 가능하도록 태그 안테나를 설계 및 제작하였다. 기존 도체 태그용 RFID 안테나는 크기가 큰 단점이 있으나, 본 논문에서는 미앤더 구조를 제안하여 안테나 크기의 소형화에 중점을 두었다. 2 개의 유전체를 결합하여 도체에서의 특성 감소를 최소화 하였고 급전부와 단락부의 간격조절로 사용된 칩 저항인 77-j100옴과의 conjugate 매칭을 유도 하였다. 태그의 크기는 30 ${\times}$ 40 mm로 기존의 태그안테나에 비해 소형임에도 임피던스 특성을 얻을 수 있음을 확인하였다. 대역폭은 UHF대역을 만족하는 $900MHz{\sim}921MHz$를 얻었고, 도체에 태그를 부착 후 인식거리 측정에 있어서도 기존 제품과 유사한 특성을 얻었다.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.5C no.2
• /
• pp.63-66
• /
• 2005

This paper describes analysis and pattern recognition techniques for Partial Discharge(PD) signals in Gas Insulated Switchgears (GIS). Detection of PD signals is one of the most important factors in the predictive maintenance of GIS. One of the methods of detection is electro magnetic wave detection within the Ultra High Frequency (UHF) band (300MHz $\~$ 3GHz). In this paper, PD activity simulation is generated using three types of artificial defects, which were detected by a UHF PD sensor installed in the GIS. The detected PD signals were performed on three-dimensional phi-q-n analysis. Finally, parameters were calculated and an Artificial Neural Network (ANN) was applied for PD pattern recognition. As a result, it was possible to discriminate and classify the defects.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1558-1560
• /
• 2001

네트워크 분석기를 이용하여 GIS용 UHF 부분방전 검출장치가 CIGRE 권고안을 만족시킴을 보일 수 있는 방법을 제안하였다. 이 방법은 운전중인 GIS에서도 활용이 가능하며 주파수 영역에서 GIS 내 부분방전신호의 감쇠율을 정확히 측정할 수 있고 측정 시스템의 개별부품에 대한 교정이 필요치 않다. 또한 측정한 GIS의 구간별 감쇠율을 이용해 센서의 종류와 부분방전검출장치 및 GIS의 구성에 따라 센서의 위치를 손쉽게 결정할 수 있다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.1 s.24
• /
• pp.33-40
• /
• 2006

A compact broadband active composite dipole antenna for direction finding system at the V/UHF-band is presented. It uses the composite structure which improves the antenna gain and the active circuit for broadband operation. This type of antenna has a high gain more than that of one dipole antenna within limited length(1m). The basic design and performance of both antenna structure and integrated active circuit are presented.

• Journal of electromagnetic engineering and science
• /
• v.13 no.4
• /
• pp.208-213
• /
• 2013

This paper proposes a tag antenna for radio frequency identification (RFID) food system. The RFID tag antenna is designed and fabricated based on the rectangular loop concept used in the UHF band (Korean and Japanese standards, 916.7-923.5MHz). The proposed tag antenna is composed of a radiation patch, sensor tag chip, temperature sensor, oscillator, and battery. We conjugated matching between the tag antenna and the sensor tag using a U-shaped stub. Details of the proposed tag antenna design and the simulated and measured results are presented and discussed.