• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.280-283
• /
• 2000

Users of computer interfaced with the LAN use the same printer with time sharing. Alternatively, Hey use the multi-user printer interface to print in the office which can't have LAN system due to the great expenses. Otherwise they have to connect directly moving the printer to computer. In this papaer, we present a new printer interface equipment which can interface a printer and multi computers through wireless using the radio frequency of about 430MHz. The tranceivers of the equipment consist of two part: one part is installed in parallel port of computer and other part is installed in Centronix port of printer. Their maximum data rate is 9600bps and the communication area is about 50 meters in best case.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.2055-2058
• /
• 2002

It designs the general description of 8-VSB DTV transmission system will be installed and operated in future on the basis of NTSC TV transmission system in operation now. First of all, it investigates a condition that can maintain optimum received field in case of ground wave broadcasting with analog NTSC and digital 8-VSB DTV. Also it calculates critical value of minimum field strength fur receiving by using field strength calculation method of Longley-Rice. The 8-VSB DTV transmission sets its goal in transmission of data with 19.39Mbps at high speed in order to be available of HDTV in the band of NTSC 6MHz. Accordingly, the optimum of field strength between transmission and receiving points most of all is important problem. So,8-VSB DTV transmission should be enlarged or effective compared with NTSC service coverage. This study is to calculate the transmission power necessary in switching from NTSC VHF to DTV UHF and from NTSC UHF to DTV UHF for maintaining service coverage that NTSC is equal to 8-VSB DTV as a result of calculation.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.10
• /
• pp.27-34
• /
• 2012

If obstacle in GIS(Gas Insulted Switchgear), its affects are great are on the community and it is consequently demanded lots of difficulities to recover and repair. Accordingly, diagnosis techniques, that are able to prevent from accidents before they happen by providing more stable and highly reliable power effectively and finding sign of the accidents is very important. A novel UHF(Ultra High Frequency)-microstrip antenna is presented. The measured impedance bandwidth of the proposed antenna is from 0.5GHz to 15GHz with the stop band from 0.5GHz to 10.7GHz for VSWR<2. Form results of this study, The antenna is will play an important role for the senser for insulation diagnosis system by UHF method of real site GIS and power equipment using $SF_6$ gas.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.4
• /
• pp.71-75
• /
• 2008

A folded monopole antenna is proposed for mobile communication applications. The proposed antenna covers CDMA and GSM at low frequency band, and it has a wide bandwidth (6.85 GHz) at high frequency band to cover GPS, DCS, USPCS, UHfS, WLAN (2.4, 5.2, 5.8 GHz), and the future application of IEEE 802.16e mobile WiMAX.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.2
• /
• pp.59-63
• /
• 2009

The UTP cable has been widely used, recently it is being developed for use in the UHF frequency band. One important characteristic of the UTP cable is NEXT. This research is to develop a pitch selection technique for an UTP cable which leads to a satisfactory NEXT. The transmission line model involving mutual inductances and capacitances between line pairs is used, and the simulation was carried out for frequencies from 1 MHz to 600 MHz. With respect to the worst margin of the NEXT for a Cat. 6 cable the simulation and measurement results show a good agreement.

• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.846-849
• /
• 2009

본 논문에서는 듀얼 밴드(UHF: 470-862 MHz, L: 1452-1492 MHz) DVB-H 안테나를 제작하였다. 제안된 안테나는 입력 임피던스 매칭 회로를 이용한 평판형 역 F 안테나(PIFA)로 구성되었다. 급전점에 구성된 매칭 회로는 안테나의 광대역(UHF: 470-862 MHz: 63%) 동작특성을 만족시킨다. 제시된 안테나는 전방향적 방사특성을 가지며 상용 모바일(PMP)에 적용가능한 충분한 이득(최대이득: 1.70dBi)을 보인다. 또한 안테나는 유전율($\varepsilon_r$ = 3.2)인 PMP 케이스에 부착되어 상용 모바일용으로 소형화 되었다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.5
• /
• pp.34-41
• /
• 2008

This paper describes the design of SP3T PIN diode switch which has a 500W high power handling capability in $20{\sim}400MHz$ frequency range. Design factors were investigated and it was confirmed by simulation that the characteristics of insertion loss, VSWR, and isolation met design goal. Also, the capability to handle 500W high power with very fast switching speed of less than $26{\mu}s$ was confirmed and insertion loss of less than 1dB, VSWR of less than 1.4:1, and isolation of higher than 60dB were obtained by experiments.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.3C no.6
• /
• pp.224-229
• /
• 2003

An ultra high frequency (UHF) coupler possessing ultra wide band (UWB) characteristics ranging from hundreds of MHz to several GHz is desirable for the detection of the partial discharge (PD) pulses because the pulses propagate with rise time shorter than one nanosecond in a gas-insulated substation (GIS). Thus, the authors have proposed a log-periodic antenna for GIS PD detection. Various parameters of the coupler such as frequency bandwidth, coupler gain, radiation pattern, and coupler geometry were considered throughout the simulations. The experiments for the detection characteristics of the coupler were carried out in the mock-up GIS chamber. The results indicated that the detection characteristics of the coupler are dependent on the installation angle of the coupler, the position of the coupler in the hand hole and the existence of the spacer.

• ETRI Journal
• /
• v.30 no.4
• /
• pp.600-602
• /
• 2008

A very small patch-type RFID tag antenna (UHF band) using ceramic material mountable on metallic surfaces is presented. The size of the proposed tag is 25 mm${\times}$25 mm${\times}$3 mm. The impedance of the antenna can be easily matched to the tag chip impedance by adjusting the size of the shorting plate of the patch and the size of the feeding loop. The measured maximum reading distance of the tag at 910 MHz was 5 m when it was mounted on a 400 mm${\times}$400 mm metallic surface. The proposed design is verified by simulation and measurements which show good agreement.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1673-1677
• /
• 2008

This paper studies on the read rate of UHF-band RFID tag. An RFID tag antenna attached on the high permittivity surface will be detuned that results in deteriorating the read rate. In this study, we investigate that the electrical performance for the tag antenna is detuned due to the ceramic material and the read rate is radically improved after tuning the antenna.