• Journal of the Korean Wood Science and Technology
• /
• 제34권4호
• /
• pp.31-36
• /
• 2006

본 연구는 UF resin의 접착성능을 개선하여 그 사용처의 확대하기 위하여 각 F/U 몰비별로 제조된 UF resin에 접착성능이 우수한 지방산-글리세롤-pMDI 당량비 1:1:4인 비교적 저가의 isocyanate prepolymer접착제를 선정하여 UF resin의 수지고형분 기준으로 0 wt%(대조구), 2 wt%, 5 wt%, 10 wt%, 25 wt%, 50 wt%로 첨가 혼합하여 접착 성능을 조사하였다. 그 결과, 상태 접착력(Type 2)은 F/U 몰비 1.4에서 가장 우수한 접착력을 준내수 접착력(Type 1.5)은 FGMDI첨가량이 25% 이상에서 KS 합판 접착성 기준인 $7.5kgf/cm^2$를 모두 상회하는 $11kgf/cm^2$ 이상을 나타내었다. 상태접착력대비 준내수 접착력의 평균 감소율은 F/U 몰비가 높아질수록, 지방산-글리세롤-pMDI접착제의 첨가량이 많아질수록 그 감소의 폭이 둔화되었다.

• 농업과학연구
• /
• 제36권1호
• /
• pp.11-18
• /
• 2009

The purpose of this study is to examine a proper amount of addition and a proper point for addition of titanium dioxide for the manufacture of E0 type of urea-formaldehyde resin (UF). The reduction of free formaldehyde from UF resin treated particle board was also investigated. $TiO_2$ content was 0.5%, 1% and 3% on the dry basis of UF resin. UV light was used to initiate reaction. The results of this study are as follows: 1. During UF resin manufacturing process, the second adding step of urea was proper point for $TiO_2$ addition. 2. 1 % addition of $TiO_2$ gave good values for the Eo type urea-formaldehyde resin. 3. There was no significant difference between physical properties of particle board, but the higher the adding content of titanium dioxide resulted in the lower the mechanical properties.

• 한국재료학회지
• /
• 제29권5호
• /
• pp.277-281
• /
• 2019

The objective of this research is to evaluate the effect of adhesive types on dimensional stability of bamboo-oriented particleboard. The materials used in this research are bamboo tali(Gigantochloa apus J.A & J.H. Schult. Kurz), UF/MDI(8, 10, 12 % level), and MF, MDI, and PF at 7 % level. Particle and adhesive are mixed using a blending machine; then, mat forming and hot pressing processes are performed using adhesive-suitable temperature and time references. MDI resin is set at $160^{\circ}C$ temperature for 5 minutes. PF resin and MF resin are pressed at $170^{\circ}C$ for 10 minutes, and $140^{\circ}C$ for 10 minutes, respectively, while UF/MDI sets at temperature of $140^{\circ}C$ for 10 minutes. The results show that particleboard using PF resin produces the lowest thickness swelling value. The particleboard using UF/MDI resin also produces good response for thickness swelling value. Interesting things happen in that UF/MDI adhesive produces a thickness swelling value better than that of MDI resin. FTIR analysis on particleboard bonded by UF/MDI resin combination shows the presence of carbonyl group C=O vibration on multi substitution of urea at wave number of around $1,700cm^{-1}$.

• Journal of the Korean Wood Science and Technology
• /
• 제45권4호
• /
• pp.471-481
• /
• 2017

As the molecular weight (MW) of urea-formaldehyde (UF) resins had a great impact on their properties, this work was conducted to study effect of analytical parameters of gel permeation chromatography (GPC) on the MW measurement of UF resins. GPC parameters such as flow rate, column, detector temperature, and sample injection temperature were selected to compare number-average molecular weight (Mn), weight-average molecular weight (Mw), molecular weight distribution (MWD) and polydispersity index (PDI) of two UF resins with different viscosities. As expected, UF resin with higher viscosity resulted in greater Mn and Mw than those of low viscosity UF resin. When the flow rate increased, both Mn and Mw of UF resins decreased and MWD became narrower. By contrast, both Mn and Mw increased and MWD became wide when the column, detector, and sample injection temperature increased. The column, detector, and sample injection temperature of $50^{\circ}C$ at a flow rate of $0.5m{\ell}/min$ resulted in the highest MW and broadest MWD for the GPC analysis. These results suggest that the apparent molecular size or a hydrodynamic radius of UF resin molecules dissolved in the mobile phase affect to Mn, Mw and MWD.

• 접착 및 계면
• /
• 제13권2호
• /
• pp.85-88
• /
• 2012

In this paper, the curing reaction of UF resins was investigated by a real time FT-IR method. The curing temperature range of the UF resin was $25{\sim}200^{\circ}C$. It was found that the reactions of UF resin at different temperatures resultedin resins with different cross-linked structures. A real time FT-IR spectroscopy can be considered as a good routine analytical tool for following the progress of UF resin curing.

• Journal of the Korean Wood Science and Technology
• /
• 제34권5호
• /
• pp.42-51
• /
• 2006

The this study, the effect of rice husk flour (RHF) as scavenger on formaldehyde emission rate and formaldehyde content from urea-formaldehyde (UF) resin bonded RHF content wood particleboards (PB). Two type of particle size ($30{\mu}m$ and $300{\mu}m$) of RHF was premixed with the UF resin at 5% and 15% by weight. The performance of UF resins is greatly influenced by the curing characteristics in their curing processing. The curing behavior was monitored activation energy ($E_a$) by DSC and pH variation according to RHF contents. PB with dimensions of $27cm{\times}27cm{\times}0.7cm$ was prepared at a specific gravity of 0.75 using $E_1$ and $E_2$ class UF resins. Formaldehyde emission and formaldehyde content from RHF filled PB bonded with UF resin was measured by 24 h desiccator and perforator method, respectively. RHF causes an increased pH of UF resin. $E_a$ of the modified UF resin decreased independently of RHF particle size. As the pH and the $E_a$ variation of the UF resin containing RHF increased, the amount of formaldehyde content decreased. The formaldehyde emission and formaldehyde content levels of the PB bonded with 15 wt% of $30{\mu}m$ RHF and $E_2$ type UF resin were low and satisfied grade $E_1$, as measured by 24 h desiccator and perforator method. The result of a comparison between 24 h desiccator and perforator test using PB showed that the linear regression analyses show a good correlation between the results for the 24 h desiccator and the perforator tests. The linear regression of a correlation between the desiccator and the perforator was Y=4.842X-0.064 ($R^2=0.989$). RHF was effective at reducing formaldehyde emission and formaldehyde content in urea-formaldehyde adhesives when used as scavenger.

• 한국의류학회지
• /
• 제9권2호
• /
• pp.13-26
• /
• 1985

In this study, when cotton fabrics dyed with Direct dyes are treated under various resin concentration 2, 4, 8, 12, $14\%$ with ureaformaldehyde(UF) and melamineformaldehyde(MF) resin which can be imparted the crease recovery to textiles, chang of properties on lightfastness, washfastness, crease recovery, breaking strength, etc. and color changes are investigated. the results are as follows 1) Color difference(${\Delta}$E) increased but K/S value decreased according to the increase of resin cone. such tendency showed that MF treated fabrics and soaping fabrics were evident than UF treated fabrics and non-soaping fabrics. 2) In lightfastness, ${\Delta}$E and K/S value of resin treated fabrics were reduced as compared with untreated fabrics according to the increase of resin cone. The lower ${\Delta}$E and K/S value of MF than ${\Delta}$E and K/S value of UF showed low lightfastness of MF. pH of resin treted fabrics was almost unaffected with lightfastness. 3) In washfastness, ${\Delta}$E and K/S value of resin treated fabrics decreased slightly as com-pared with untreated fabricsaccording tothe increase of resin cone. The ${\Delta}$E and K/S value of MF decreased lower than UF. But in the case of the higher resin cone. than about $8\%$, they were not almost differentiated. 4) As resin cone. increased, crease recovery considerably increased but breaking strength and elongation decreased. The fabrics treated with UF were good crease recovery, whereas the fabrics treated with MF were good breaking strength. 5) Soaping appeared to improve the lightfastness, washfastness, crease recovery but appeared to work adverse effect on breaking strength.

• Journal of the Korean Wood Science and Technology
• /
• 제31권1호
• /
• pp.22-26
• /
• 2003

증량제로서 카제인과 콩을 첨가한 요소수지 접착제와 소나무 간벌재 파티클로 실험실 파티클보드를 제조하였다. 소나무 간벌재 파티클로 제조된 파티클보드를 성능 평가한 결과 소나무 간벌재는 파티클보드의 원료로서 적합하다. 증량된 요소수지로 접착된 파티클보드는 증량제의 첨가량이 증가함에 따라 기계적인 성능은 감소하는 경향이었다. 그러나 요소수지 접착제의 고형분량에 대해 카제인은 15%까지 콩은 20%까지 첨가하여 파티클보드 제조에 사용할 수 있다.

• Journal of the Korean Wood Science and Technology
• /
• 제33권2호통권130호
• /
• pp.29-39
• /
• 2005

Formaldehyde emissions from wood-based panels bonded with pine and wattle tannin-based adhesives, urea-formaldehyde resin (UF), melamine-formaldehyde resin (MF), and co-polycondensed resin of urea-melamine-formaldehyde (UMF) were measured by the Japanese standard method using a desiccator (JIS A 1460) and the EN 120 (European Committee For Standardization, 1991) method using the perforator value. In formaldehyde emission, all particleboards made using the wattle tannin-based adhesive with three different hardeners, paraformaldehyde, hexamethylenetetramine, and tris(hydroxyl)nitromethan (TN), satisfied the requirements of grade $E_1$. But only those made using the pine tannin-based adhesive with the hexamine as hardener met the grade $E_1$ requirements. Hexamine was effective in reducing formaldehyde emission in tannin-based adhesives when used as the hardener. While the UF resin showed a desiccator value of $7.1mg/{\ell}$ and a perforator value of 12.1 mg/100 g, the MF resin exhibited a desiccator value of $0.6mg/{\ell}$ and a perforator value of 2.9 mg/100 g. According to the Japanese Industrial Standard and the European Standard, the formaldehyde emission level of the MDF panels made with UF resin in this study came under grade $E_2$. The formaldehyde emission level was dramatically reduced by the addition of MF resin. The desiccator and perforator methods produced proportionally equivalent results. Gas chromatography, a more sensitive and advanced method, was also used. The samples for gas chromatography were gathered during the experiment involving the perforator method. The formaldehyde contents measured by gas chromatography were directly proportional to the perforator values.

• 한국잠사곤충학회지
• /
• 제27권2호
• /
• pp.47-53
• /
• 1985

요소-formaldehyde 수지를 여러 가지 조건에서 견직물에 처리하여 다음과 같은 결과를 얻었다. 1. 수명수지의 생성 조건은 요소 1mol에 대하여 formaline을 2mod 이상 사용하여 pH 4∼5로 수지욕을 만들어야 한다. 2. 수지농도가 증가하는데 비례적으로 수지부착율도 증가한다. 상대적으로 수분율을 감소하는 경향을 보였다. 3. wet pick 70%, 80%, 90%, 100% 중에서 70%일 경우가 수지잔존율이 가장 높았다. 4. curing 조건에 따른 수지의 부착율은 온도가 높을수록 탈락율은 감소하며 부착율은 증가된다. 5. 촉매의 양은 (NH4)2SO4 경우는 수지에 대하여 2.5%, HCI 경우는 1%, tataric acid 경우는 10%가 적당하였고 나머지 NaHCO3, Zn(NO3)2·6H2O인 경우는 분석이 곤란하였다. 6. 촉매의 종류에 따른 부착율은 산성 혹은 (NH4)2SO4와 같은 잠복성 촉매가 뛰어난 효과를 나타냈다. 7. 촉매에 따른 세탁견뢰성은 산성 촉매일수록 뛰어난 효과를 나타냈다.