• Proceedings of the KSRS Conference
• /
• 2009.03a
• /
• pp.305-308
• /
• 2009

최근 카메라와 같은 센서가 장착된 UAV(Unmanned Aerial Vehicle, 무인항공기)를 이용하는 분야는 방재, 농업, 군사 분야 등 매우 다양해지고 있다. 그러나 고품질의 영상데이터를 취득하기 위해서는 가벼우면서도 우수한 성능을 지닌 고가의 MEMS 센서 그리고 센서가 안정적으로 데이터를 획득할 수 있도록 안정적인 비행이 가능한 대형 UAV플랫폼으로 구성된 시스템이 필요하기 때문에 시스템 구축비용이 클 수밖에 없다. 본 연구에서는 저비용으로 영상 데이터를 취득할 수 있는 UAV시스템을 구축하여 취득된 영상데이터의 처리를 통해 얻어지는 영상의 품질을 살펴보고 그 효용성을 시험해보았다. 이를 위해서 고가인 UAV를 대신해 비교적 가격이 저렴한 R/C헬기(Remote Control, 원격조종 헬기)를 플랫폼으로 선정하고, 영상데이터를 수집하는 카메라센서를 탑재하였다. 그리고 탑재된 센서가 안정적으로 데이터를 취득할 수 있도록, 센서와 플랫폼 사이에 Gimbal을 장착하였다. 이렇게 구축된 시스템을 이용하여 시험비행을 해보았으며, 그 결과 플랫폼에 탑재된 센서로부터 비교적 안정적이고 양질의 이미지를 획득할 수 있었다. 본 연구에서 구축한 R/C 헬리콥터 시스템을 통하여 저비용/고효율의 영상데이터를 취득할 수 있음을 확인하였다. 구축된 시스템은 근접한 거리에서 대상물의 영상을 취득하기 때문에 고품질의 3차원 모델데이터 생성에 매우 도움이 될 것으로 생각한다.

• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.3
• /
• pp.197-204
• /
• 2017

This study was carried out to apply the UAV(Unmanned Aerial Vehicle) coupled with Multispectral sensor for the algae bloom monitoring in river. The study acquired remote sensing data using UAV on the midstream area of Gum River, one of four major rivers in South Korea. Normalized difference vegetation index (NDVI) is used for monitoring algae change. This study conducted water sampling and analysis in the field for correlating with NDVI values. Among the samples analyzed, the chlorophyll concentration exhibited strong and significant linear relationships with NDVI, and thus NDVI was chosen for algae bloom index to identify emergence aspect of phytoplankton in river. Aerial remote sensing technology can provide more accurate, flexible, cheaper, and faster monitoring methods of detecting and predicting eutrophication and therefore cyanobacteria bloom in water reservoirs compared to currently used technology. As a result, there was high level of correlation in chlorophyll-a and NDVI. It is expected that when this remote water quality and pollution monitoring technology is applied in the field, it would be able to improve capabilities to deal with the river water quality and pollution at the early stage.

• Korean Journal of Remote Sensing
• /
• v.36 no.5_4
• /
• pp.1221-1229
• /
• 2020

In urgent situations such as disasters and accidents, rapid data acquisition and processing is required. Therefore, in this study, a rapid geocoding method according to EOP (Exterior Orientation Parameter) correction was proposed through pattern analysis of the initial UAV image information. As a result, in the research area with a total flight length of 1.3 km and a width of 0.102 ㎢, the generation time of geocoding images took about 5 to 10 seconds per image, showing a position error of about 8.51 m. It is believed that the use of the rapid geocoding method proposed in this study will help provide basic data for on-site monitoring and decision-making in emergency situations such as disasters and accidents.

• Korean Journal of Remote Sensing
• /
• v.35 no.3
• /
• pp.359-373
• /
• 2019

Bursaphelenchus xylophilus(Pine wilt disease) is a serious threat to the pine forest in Korea. However, dead wood observation by Pine wilt disease is based on field survey. Therefore, it is difficult to observe large-scale forests due to physical and economic problems. In this paper, high resolution images were obtained using the unmanned aerial vehicle (UAV) in the area where the pine wilt disease recurred. The damaged tree due to pine wilt disease was detected using Artificial Neural Network (ANN), Support Vector Machine (SVM) supervision classification technique. Also, the accuracy of supervised classification results was calculated. After conducting supervised classification on accessible forests, the reliability of the accuracy was verified by comparing the results of field surveys.

• Korean Journal of Remote Sensing
• /
• v.37 no.4
• /
• pp.733-745
• /
• 2021

Although waxy corn varieties developed after the 1980s show differences depending on development stages and conditions, studies on the characteristics of waxy corn during the growth stage are rare. The subject of this study was a field survey and unmanned aerial vehicle (UAV) image acquisition of four waxy corn varieties cultivated in Idam-ri, Gammul-myeon, Goesan-gun, Korea. The study was conducted in four stages at intervals of two weeks after planting in 2019. The growth characteristics of each of the four varieties were analyzed using growth curves obtained based on field survey and UAV imagery data. The characteristics of each growth stage of the four varieties of corn, as assessed using normalized difference vegetation index (NDVI) and plant height (P.H.) values, were as follows. The growth model was identified as a model in which three-parameter logistic (3PL) curves reflect the growth characteristics of corn well. In particular, it was found that the variations in growth rate shown by P.H. and NDVI values clearly explain the differences between corn varieties. Among the four cultivars, growth and development first occurred at the early vegetative stage in Daehakchal, followed by Mibaek 2, Miheukchal, and finally Hwanggeummatchal. The variationsin P.H. and NDVI were achieved quickly and earlier in Daehakchal, followed by Mibaek 2, Hwanggeummatchal, and Miheukchal. It was confirmed that these results reflected the characteristics of the fast white-type varieties, while the black-type varieties were delayed, as in a previous study. These results reflect the resistance to lodging that affects the cultivation environment and the response characteristics to nutrients and moisture. It was confirmed that UAV accurately provides growth information that is very useful for analyzing the growth characteristics of each corn variety.

• Korean Journal of Remote Sensing
• /
• v.40 no.1
• /
• pp.93-101
• /
• 2024

Accurate field crop classification is essential for various agricultural applications, yet existing methods face challenges due to diverse crop types and complex field conditions. This study aimed to address these issues by combining support vector machine (SVM) models with multi-seasonal unmanned aerial vehicle (UAV) images, texture information extracted from Gray Level Co-occurrence Matrix (GLCM), and RGB spectral data. Twelve high-resolution UAV image captures spanned March-October 2021, while field surveys on three dates provided ground truth data. We focused on data from August (-A), September (-S), and October (-O) images and trained four support vector classifier (SVC) models (SVC-A, SVC-S, SVC-O, SVC-AS) using visual bands and eight GLCM features. Farm maps provided by the Ministry of Agriculture, Food and Rural Affairs proved efficient for open-field crop identification and served as a reference for accuracy comparison. Our analysis showcased the significant impact of hyperparameter tuning (C and gamma) on SVM model performance, requiring careful optimization for each scenario. Importantly, we identified models exhibiting distinct high-accuracy zones, with SVC-O trained on October data achieving the highest overall and individual crop classification accuracy. This success likely stems from its ability to capture distinct texture information from mature crops.Incorporating GLCM features proved highly effective for all models,significantly boosting classification accuracy.Among these features, homogeneity, entropy, and correlation consistently demonstrated the most impactful contribution. However, balancing accuracy with computational efficiency and feature selection remains crucial for practical application. Performance analysis revealed that SVC-O achieved exceptional results in overall and individual crop classification, while soybeans and rice were consistently classified well by all models. Challenges were encountered with cabbage due to its early growth stage and low field cover density. The study demonstrates the potential of utilizing farm maps and GLCM features in conjunction with SVM models for accurate field crop classification. Careful parameter tuning and model selection based on specific scenarios are key for optimizing performance in real-world applications.

• Korean Journal of Remote Sensing
• /
• v.36 no.2_2
• /
• pp.263-275
• /
• 2020

In this study, DEMs (Digital elevation model) based on LIDAR, TanDEM-X and UAV (Unmanned Aerial Vehicle) are used to analyze topographic change of Gomso tidal flat during a few years. DEM from LIDAR data was observed at 2011 by KHOA (Korean hydrographic and oceanographic agency) and DEM based on TanDEM-X data was generated at Lee and Ryu (2017). UAV data was observed at KM and KH area of Gomso tidal flat. KM area was surveyed at MAY and AUG 2019, and KH area was surveyed at APR 2018 and MAY 2019. During research period, 2011 to AUG 2019, elevation of KM area is decreased 0.24 m in average, and Chenier is retreat to landward about 130 m. In KH area, elevation is increased 0.16 m in average during research period, 2011 to MAY 2019. It is expected that multi-platform remotely sensed data can help to study accurate topographic change of tidal flat.

• Korean Journal of Remote Sensing
• /
• v.34 no.4
• /
• pp.611-624
• /
• 2018

The percentage of moisture content in rice before harvest is crucial to reduce the economic loss in terms of yield, quality and drying cost. This paper discusses the application of artificial neural network (ANN) in developing a reliable prediction model using the low altitude fixed-wing unmanned air vehicle (UAV) based reflectance value of green, red, and NIR and statistical moisture content data. A comparison between the actual statistical data and the predicted data was performed to evaluate the performance of the model. The correlation coefficient (R) is 0.862 and the mean absolute percentage error (MAPE) is 0.914% indicate a very good accuracy of the model to predict the moisture content in rice before harvest. The model predicted values are matched well with the measured values($R^2=0.743$, and Nash-Sutcliffe Efficiency = 0.730). The model results are very promising and show the reliable potential to predict moisture content with the error of prediction less than 7%. This model might be potentially helpful for the rice production system in the field of precision agriculture (PA).

• Proceedings of the KSRS Conference
• /
• 2009.03a
• /
• pp.61-65
• /
• 2009

매년 재난/재해의 발생 빈도와 피해 규모가 증가하고 있다. 그 피해를 최소화하기 위해 주기적인 모니터링을 수행하여 위기 상황을 사전에 대비하고 긴급 대응 체계를 구축하여 상황 발생 시 피해 상황을 신속하게 파악할 수시스템에 있어야 한다. 모니터링의 용이성과 신속성을 확보하기 위해 UAV에 기반한 긴급 매핑 대한 관심이 증가하고 있다. 그러나 이러한 시스템으로부터 획득된 센서 데이터가 Georeferencing되었을 때 이로부터 다양한 공간 정보를 도출할 수 있다 본 논문에서는 UAV 기반의 매핑 시스템으로부터 획득된 센서 데이터를 시뮬레이션 해보고 시뮬레이션 데이터에 대하여 Aerial Triangulation을 수행하여 영상을 Georeferncing하고 위치/자세 정보를 보정하고자 한다. 실험은 (1) 시뮬레이션 데이터 생성, (2) 초기값 생성, (3) AT 수행을 통한 위치/자세 조정의 3단계로 구성된다. 800m 길이의 1개 스트립, 500m 길이의 2개 스트립으로 나눠 비행경로를 정하고 200m, 400m, 600m의 비행고도에 대하여 다양한 실험을 수행하였다. 실험 결과 위치/자세의 초기값 RMSE에서 90% 이상 개선된 RMSE를 얻을 수 있었으며, 비행고도가 높아질수록 RMSE의 향상도는 반비례하였다. 향후에는 Sequential 알고리즘을 적용하여 연산 속도를 향상시킬 수 있고 궁극적으로 실시간 영상 Georeferencing을 가능하게 할 것으로 기대된다.

• Korean Journal of Remote Sensing
• /
• v.35 no.5_1
• /
• pp.705-714
• /
• 2019

Precision positioning is necessary for various use of high-resolution UAV images. Basically, GCP is used for this purpose, but in case of emergency situations or difficulty in selecting GCPs, the data shall be obtained without GCPs. This study proposed a method of improving positional accuracy for x, y coordinate of UAV based 3 dimensional point cloud data generated without GCPs. Road vector file by the public data (Open Data Portal) was used as reference data for improving location accuracy. The geometric correction of the 2 dimensional ortho-mosaic image was first performed and the transform matrix produced in this process was adopted to apply to the 3 dimensional point cloud data. The straight distance difference of 34.54 m before the correction was reduced to 1.21 m after the correction. By confirming that it is possible to improve the location accuracy of UAV images acquired without GCPs, it is expected to expand the scope of use of 3 dimensional spatial objects generated from point cloud by enabling connection and compatibility with other spatial information data.