• KIEAE Journal
• /
• v.4 no.1
• /
• pp.11-20
• /
• 2004

Innovative daylighting systems in buildings in various climatic zones around the world have been developed under the IEA SHC Task21. The performance assessment were obtained by monitoring the most systems using full-scale test model rooms or actual buildings under real sky conditions. This study aims to analyze the configuration and monitoring system of the nine Mock-up models of the IEA SHC Task21 comparatively. For the purpose, the geometry of the test rooms (length, width, height, window area, glazed area and occupied), reflectance of walls, floor and ceiling, transmittance of glazing (transmittance for hemispherical irradiation, normal irradiation and U-value) were compared. And equipment for measurement (manufacturer, range, calibration, maximum calibration error, cosine response error, fatigue error), and data acquisition system (manufacturer, type, number of differential analogue input channels, A/D converter resolution in bits, data acquisition software) were also analyzed comparatively. Some findings of these experimental methodology of standard monitoring have been proven to be a valuable one for future assessment of advanced daylighting systems in our country.

• 유체기계공업학회:학술대회논문집
• /
• 2000.12a
• /
• pp.345-350
• /
• 2000

The heat produced by the fission in the fuel of HANARO, 30 MW research reactor, is transferred from the primary cooling water to the secondary cooling water through heat exchangers, and the heat absorbed by the secondary cooling water is released into the atmosphere by the 33 MW cooling tower which is a mechanical induced draft and counter flow type. If the outlet temperature of cooling tower exceeds 33 of due to the loss of the cooling tower performance under reactor operation above $50\%$ of the full power, the reactor power should be reduced to half of the full power for safe operation. Therefore, the cooling capability of cooling tower should be maintained for the reactor to be normally operated. To predict the capability of cooling tower for full power reactor operation of 30 MW, the performance test of cooling tower was done at the reactor present power of 24 MW and the capability was respectively evaluated by characteristics and performance curves methods in accordance with the Code of Cooling Tower Institute of U.S.A. to confirm the reliability of evaluation. As a result, it was confirmed, through the results of each evaluation, that the cooling capability of cooling tower meets the design required heat load. Also, the equations of the performance and the characteristics curves of the cooling tower, based on the collected data during this performance test, was obtained for developing the calculation program to predict the cooling capability during reactor operation.

• Journal of muscle and joint health
• /
• v.22 no.3
• /
• pp.177-184
• /
• 2015

Purpose: The purpose of the study was to evaluate career choice of male nursing students and identify factors influencing their career choice. Methods: Subjects were 123 male nursing junior and senior students in B city, U city, and GN area. Career types were classified into a hospital nurse and a community nurse. Subjects were asked about 29 items of nurse image and 31 items of satisfaction on clinical practice. The collected data were analyzed by frequency, percentage, average and standard deviation, t-test, ${\chi}^2$-test, and logistic regression, using SPSS 21.0 program. Results: The percentage of career choice which subjects hoped when admitted into nursing universities consisted of hospital nurses of 77.2%, while the percentage changed to hospital nurses of 52.8% at the time of this survey. The nurse image represented as an influencing factor, and it was found that if nurse image score increased one unit, the hoping units of career type of hospital nurse increased 2.69 times. Conclusion: The educational institutions have to provide career education programs and information concerned to not only hospital nurses but also community nurses, and further studies on the positioning and expanding roles of community male nurses need to be conducted.

• International Journal of Highway Engineering
• /
• v.16 no.4
• /
• pp.45-50
• /
• 2014

PURPOSES : The objective of this study is to analyze the performance of anti-stripping agent depending on its type and content to reduce pothole, an increasing pavement distress due to abnormal climate intensity. METHODS : In the past years, U.S and many countries in Europe use hydrated lime and liquid anti-stripping agent in asphalt mixtures. Hydrated lime or liquid anti-stripping agent is substituted for filler and binder, respectively, to improve the anti-stripping property of asphalt mixtures. To investigate this, indirect tensile strength test was performed and TSR values were compared for different content of hydrated lime and types of liquid anti-stripping agent in asphalt mixture. RESULTS : Test results indicate that hydrated lime remarkably increased the asphalt mixture performance on anti-stripping denoted by the increased in TSR values from 55% to 100%. Liquid anti-stripping agent also increased the value of TSR but not significant. In addition, depending on the types of aggregate, TSR values and effect of liquid anti-stripping were different. CONCLUSIONS : Using anti-stripping agents improve the anti-stripping property of asphalt mixture especially hydrated lime; however, more experiments should be conducted to improve the reliability about the effect of liquid anti-stripping agent.

• Journal of Radiation Protection and Research
• /
• v.28 no.4
• /
• pp.281-290
• /
• 2003

The KN-12 spent nuclear fuel transport cask, which is a Type B(U) package designed to comply with the requirements of Korea Atomic Energy Act[1], IAEA Safety Standards Series No.TS-R-1[2] and US 10 CFR Part 71[3], is designed for carrying up to 12 PWR spent fuel assemblies in a basket structure. The cask has been licensed in accordance with Korea Atomic Energy Act and was fabricated in Korea in accordance with the requirements of ASME B&PV Sec.III, Div.3[4]. The cask must maintain thermal integrity in accordance with the related regulations and be evaluated to verify that the thermal performance of the cask complies with the regulatory requirements. The temperatures of the cask and components were determined by using finite elements methods with a numerical tool, safety tests using an 1/8 height slice model of the real cask were conducted to demonstrate verification of the numerical tool and methods, and heat transfer tests for normal transport conditions were performed as a fabrication acceptance test to demonstrate the heat transfer capability of the cask.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.1
• /
• pp.14-18
• /
• 1998

A low density polyethylene(LDPE) was examined as an additive in phenol-formaldehyde(PF) resin adhesive for bonding radiata pine plywood. The LDPE was supplied by the commercial manufacturer. The LDPE was compared to a commercial filler commonly used in structural plywood adhesives in the United States. The adhesive mixes were made by following the recommended procedure of Georgia-Pacific Resins Inc.. using plywood-type PF resin. A total of 48 three-ply plywoods. 6.3 mm nominal thickness and 30 by 30 em in size, were made at two press times (4 and 5 min). two press temperatures (150 and $160^{\circ}C$) and 30 minute assembly times for four adhesive mixing types. Evaluations of the LDPE addition were carried out by performance tension shear tests after two cycle boil aging tests on plywood per the U.S. Product Standard PS I-83. After accelerated-aging tests. plywoods were exhibited no delamination. The test results included tension shear strength and estimated wood failure values. The plywood test results support the use of polyethylene as an additive in plywood adhesives.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.19 no.3
• /
• pp.135-141
• /
• 2019

Background: The fear of needle insertion and pain during anesthesia is a source of patient dissatisfaction in dentistry. Inferior alveolar nerve block (IANB) remains the most common type of block and is in itself painful. Computer-controlled local anesthetic delivery (CCLAD) has been proven to reduce the pain associated with injection of anesthetics in various blocks. However, the efficacy of CCLAD for IANB in adults remains unknown. Methods: Sixty-four adult patients requiring bilateral IANB were selected and divided into two groups: group A (50 patients receiving IANB via CCLAD) and group B (50 patients receiving IANB using a conventional cartridge syringe). Pain perception and patient comfort were assessed using the visual analog scale and the 5-point semantic scale, respectively. Results: The pain perception was compared between the two groups using the Mann-Whitney U-test, and the P value was 0.003. The patient comfort was also compared using the same test, and the P value was 0.484. Conclusion: A significant difference was observed in the pain perception of the patients during CCLAD. The patient comfort was grossly equal for both techniques.

• Korean Journal of Childcare and Education
• /
• v.19 no.4
• /
• pp.1-27
• /
• 2023

Objective: This study designed an Augmented Reality-based intervention program for children with conflicted shyness and examined its effects on social avoidance motivation and preference for being with others. Methods: Sixteen six-year-old children were randomly assigned to either the experimental or control group. The experimental group participated in a six-week AR-based program. Both teachers and children rated social avoidance motivation and preference for being with others to evaluate the program's effectiveness. Data were analyzed using the Wilcoxon signed-rank test and the Mann-Whitney U test. Results: Social avoidance motivation decreased only for the experimental group. Conversely, the control group showed increased motivation scores as reported by the children. The preference for being with others increased in the experimental group based on teacher reports. For the control group, preference scores reported by teachers and children were maintained and decreased, respectively. Conclusion/Implications: This study highlights the effectiveness of the intervention in reducing social avoidance motivation and maintaining a preference for being with others in children experiencing conflicted shyness. Furthermore, the use of AR technology provided a psychologically safe environment for them to initiate social interactions without fear of negative evaluation, highlighting its potential as a primary intervention tool for this population.

• Journal of Korean Physical Therapy Science
• /
• v.6 no.2
• /
• pp.1007-1017
• /
• 1999

The purpose of this study was to evaluate the factors influencing the ambulatory status in hemiplegia with intracerebral hemorrhage after rehabilitation. Thirty patients with stroke who was admitted in the Chosun University Hospital, between from January 1st' 1998 and December 31st' 1998, were included in this study. The following variables as a potential predictors for ambulation were evaluated at treatment of the stroke onset; 1) general characteristics including age and sex, and 2) clinical characteristics including frequency and onset time of the stroke, affected side, duration of the treatment, time interval between onset and rehabilitation, manual muscle test of paretic limb, sitting and standing balance, proprioception, perception, cognitive function. We compared and analyzed the these variables to the two type of ambulatory status at the time of the discharge by Modified Barthel Index, independent, dependent. The data were analyzed by student t-test, Fisher-exact test, Mann Whitney-U test, $X^{2}$-test, correlation analysis(spearman's). The results were as follows; 1. Were no significantly inflenced independent ambulatory status among general characteristics. 2. Frequency of the stroke and proprioception (p<0.05), muscle strength of the lower limb, cognitive function and standing balance (p<0.01), perception and sitting balance (p<0.001) were significantly inflenced independent ambulatory status among clinical characteristics. 3. Independent Variable correlated with the ambulatory status were muscle strength of the lower limb, proprioception and sitting balance (p<0.05), standing balance, frequency of the stroke, perception and cognitive function (p<0.01). Therefore the muscle strength of the lower limb, proprioception, sitting balance, standing balance, frequency of the stroke, perception, cognitive function were the most significant influencing factors of ambulatory status after rehabilitation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.1
• /
• pp.7-14
• /
• 2002

In this study, a stress analysis is made fur an ankle foot orthosis (AFO) in the view point of structural stability. The investigated AFO is a solid and standard type. To analyze the stress distribution on the neck of AFO, the maximum AFO angular translation data is obtained by gait analysis. The material test of polypropylene is made to obtain the mechanical properties of AFO. The maximum dorsiflexion appears at the midstance in the gait analysis. The experimental angular translation at the top of AFO is about 10.3$^{\circ}$ at mid stance. Three models of AFO with different width of neck are made and analyzed with ABAQUS 6.1. The stress levels and distributions of 3 different width(W$_1$, W$_2$=0.85W$_1$, W$_3$=0.60W$_1$) AFO are investigated. As a result, the standard type(W$_1$) appears to the maximum stresses at the medial edge of cutout area surrounding ankle joint. The maximum stresses of the narrower type(W$_2$) are occured on medial edge and center of ankle. The narrowest type(W$_3$) appears to the maximum stresses at center of ankle. The maximum stresses become smaller as ankle width of AFO is narrower.