• Structural Engineering and Mechanics
• /
• 제68권1호
• /
• pp.67-80
• /
• 2018

Recently, U-section decks have been more and more used in metro and light rail bridges as an innovative concept in bridge deck design and a successful alternative to conventional box girders because of their potential advantages. U-section may be viewed as a single vent box girder eliminating the top slab connecting the webs, with the moving vehicles travelling on the lower deck. U-section bridges thus solve many problems like limited vertical clearance underneath the bridge lowest point, besides providing built-in noise barriers. Beam theory in mechanics assumes that plane section remains plane after bending, but it was found that shearing forces produce shear deformations and the plane section does not remain plane. This phenomenon leads to distortion of the cross section. For a box or a U section, this distortion makes the central part of the slab lagging behind those parts closer to the webs and this is known as shear lag effect. A sample real-world double-track U-section metro bridge is modelled in this paper using a commercial finite element analysis program and is analysed under various loading conditions and for different geometric variations. The three-dimensional finite element analysis is used to demonstrate variations in the transverse bending moments in the deck as well as variations in the longitudinal normal stresses induced in the cross section along the U-girder's span thus capturing warping and shear lag effects which are then compared to the stresses calculated using conventional beam theory. This comparison is performed not only to locate the distortion, warping and shear lag effects typically induced in U-section bridges but also to assess the main parameters influencing them the most.

• 한국재료학회지
• /
• 제31권8호
• /
• pp.450-457
• /
• 2021

From measured thermal conductivity and modeling by simulation, this study suggests that U-factors are highly related to materials used between steel and polymer. The objective and prospective point of this study are to relate the relationship between the U-factor and the thermal conductivity of the materials used. For the characterization, EDX, SEM, a thermal conductive meter, and computer simulation utility are used to analyze the elemental, surface structural properties, and U-factor with a simulation of the used material between steel and polymer. This study set out to divide the curtain wall system that makes up the envelope into an aluminum frame section and entrance frame section and interpret their thermal performance with U-factors. Based on the U-factor thermal analysis results, the target curtain wall system is divided into fix and vent types. The glass is 24 mm double glazing (6 mm common glass +12 mm Argon +6 mm Low E). The same U-factor of 1.45 W/m²·K is applied. The interpretation results show that the U-factor and total U-value of the aluminum frame section are 1.449 and 2.343 W/m²·K, respectively. Meanwhile, those of the entrance frame section are 1.449 and 2.

• 무역학회지
• /
• 제44권1호
• /
• pp.177-191
• /
• 2019

Global trade protectionism has increased further and U.S. priorities and protectionism have strengthened since Trump took office in 2017. Trump administration is actively implementing tariff measures based on U.S. domestic trade laws rather than the WTO rules and regulations. In particular, the American government has recently been imposing high tariffs due to national security and imposing economic sanctions on other countries' imports. According to the U.S. Trade Expansion Act Section 232, the American government imposed additional tariffs on steel and aluminum imports to WTO member countries such as China, India, and EU etc. on march 15, 2018. Thus, this study aims to investigate whether the U.S. Trade Expansion Act Section 232 is consistent with GATT/WTO rules by comparing the legal basis of US / China / WTO regulations related to Section 232 of the U.S. Trade Expansion Act, and gives some suggestions for responding to the Section 232 measure. As the Section 232 measure exceeded the scope of GATT's Security Exceptions regulation and is very likely to be understood as a safeguard measure. If so, the American government is deemed to be in breach of WTO's regulations, such as the most-favored-nation treatment obligations and the duty reduction obligations. In addition, American government is deemed to be failed to meet the conditions of initiation of safeguard measure and violated the procedural requirements such as notification and consultation. In order to respond to these U.S. protection trade measures, all affected countries should actively use the WTO multilateral system to prevent unfair measures. Also, it is necessary to revise the standard jurisdiction of the dispute settlement body and to explore the balance of the WTO Exception clause so that it can be applied strictly. Finally, it would be necessary for Chinese exporters to take a counter-strategy under such trade pressure.

• 콘크리트학회논문집
• /
• 제12권6호
• /
• pp.43-50
• /
• 2000

In this paper, a new splicing method was applied to design the girder section of bridges with the span length of 25m, 30m, 35m, 40m and 45m. A U-type precast prestressed section was also determined for each bridge. Additionally, the sectional area, beam depth and Guyon's efficiency factor of the spliced U-type sections in each span were analyzed in comparison with the present I-type PSC bridges. As a result, in spite of an increase of 31%∼50% in the sectional areas compared with the I-type precast girders, the spliced U-type the beam depth of the spliced U-type girder was designed as 2,050 mm compared with the I-type precast girder of 2,600mm in a 40m span bridge. The sectional efficiency factors of the spliced U-type sections were analyzed as 0.76∼0.99. It shows that the spliced U-type sections ar of a superior structural efficiency in contrast to the average sectional efficiency factor of 0.66 value in the I-type girders.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 추계학술대회 논문집
• /
• pp.54-60
• /
• 1998

PSC box bridges by MSS construction method in high-speed railway may not be cast in place at one step. Web and bottom flange(U member) in the cross section are cast in place at first, then top flange will be cast in place later with some time lag. In this section, stress distributions of U member and top flange are different with those in generally complete cast in place cross section. In the composite section composed of two different aged members, the redistribution of stresses takes place. This results from time-dependent strain characteristics of concrete and the effects of forces applied at the various stages. For comparison in the present paper, two models, one with the composite cross section and the other with generally complete cast in place cross section, are analyzed. The longitudinal stress differences of two models on considering construction stages are compared. As the analysis results show the considerable differences in the stresses of cross section between two models, the composition of cross section is considered for rational design of PSC box girder bridge.

• Journal of Plant Biology
• /
• 제18권3호
• /
• pp.109-121
• /
• 1975

The seasonal variations of the marine algal community were detected with quadrat method during May, 1974-May, 1975 at several stations in the Kwang Yang Bay. Considering the environmental factors such as salinity and water current, etc., and algal vegetation, the Bay was divided into 3 sections; Section I-Myodo and the adjacent area; Section II-Eomnamuseom and the adjacent area; Section III-inlet of the Bay from Odongdo, Yeosu. The dominant species, shown by 5-grades coverage and bimonthly investigations, appear in the order of Sargassum thunbergii(Jan.)>Chondria crassicaulis (Mar.)>Ulva pertusa(May)>U. pertusa (July)>U. pertusa and Gigartina intermedia(Sept.)> Sarg. thunbergii and Gelidium pusillum (Nov.) in Section I, and Sargassum thunbergii(Jan.)>Ulva pertusa and Hizikia fusiforme (Mar.)>U. pertusa and Sarg. thunbergii(May)>Chondria crassicaulis (Sept.)>Ch. crassicaulis (Nov.) in Section II. The members such as Srgassum thunbergii, Gelidium pusillum, G. divaricatum, Hizikia fusiforme, Carpopeltis affinis, and Chondria crassicaulis show the most luxuriant period of growth in winter (Nov.-Mar.), while Ulva pertusa shows the period in May. However, considering the dry weight of total vegetation, the most luxuriant period apperas in May and the poorest one in July. The total dry weight of the vegetation in Section II is about 3.2 times more than the one in Section I.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표대회 논문집(III)
• /
• pp.694-700
• /
• 1998

PSC box bridge by MSS construction method may not be set at cross section at one step. Web and bottom flange(U member) would be set at first, top flange will be set later with a time lag. In this case, U member and top flange concrete have different strain history. As two different aged section behaves as the composite section, there would happen the redistribution of stress. This is come from time-dependent strain characteristics of concrete itself. In this study, two models are considered, one with considering the set time of cross section and the other without. By performing longitudinal analysis of two models on considering construction stage, the stress differences of two are compared. As the analysis results show a considerable differences in the stresses of cross section between two models, the set time of cross section is needed for rational design f PSC box girder bridge.

• 대한기계학회논문집B
• /
• 제21권9호
• /
• pp.1207-1217
• /
• 1997

The present work experimentally investigated the effects of mass flux, heat flux, inlet quality on the heat transfer performance inside the U-bend of smooth and microfin tube using R-22 and R-407C refrigerants. The parameters were 200 and 400 kg/m$^{2}$ s for mass flux, 6 and 12 kw/m$^{2}$ for heat flux, 0.1 and 0.2 for inlet quality under the pressure of 0.65 MPa. The apparatus consisted of the test section of four straight sections and three U-bends, preheater, condenser, refrigerant pump, mass flow meter etc. The average heat transfer coefficient at the downstream straight section after U-bend was affected by U-bend due to the centrifugal force and mixing of two-phase flow in the U-bend. The average heat transfer coefficient at the U-bend was 4 ~ 33 % higher than that at the straight section. The average heat transfer coefficients were affected in the order of mass flux, heat flux and inlet quality. The average heat transfer coefficients in the microfin tube were lager by 19 ~ 49% and 33 ~ 69% than that in the smooth tube at the straight section and at the U-bend separately. The average heat transfer coefficients for R-407C were larger by 33 ~ 41% and 17 ~ 29% than that for R-22 in the smooth tube and the microfin tube separately.

• Nuclear Engineering and Technology
• /
• 제3권2호
• /
• pp.77-97
• /
• 1971

1970년 말까지 보고된 U-238, Np-237 및 Th-232의 고속중성자에 대한 핵분열단 면적 및 그 실험오차를 조사 분석하여 최소자숭직교다항식적합법에 의하여 단면적의 최적치와 95%신뢰도에 대응하는 오차범위를 계산하고 이 결과를 사용하여 분열스펙트럼에 대한 평균단면적치를 추정하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 춘계학술대회논문집
• /
• pp.97-103
• /
• 2009

A numerical study of the flow characteristics inside a U-type circular tube is carried out in this paper. The numerical simulations carried out by using a Navier-Stokes code which is commercially available. Before detailed numerical simulations, validation of present numerical approach is made by comparing numerical solutions with experimental data. Numerical simulations are performed to study the effect of curvature on the flow characteristics inside a U-type tube. Numerical solutions show that a significant effect on the secondary flow structure in the cross section of the tube, especially in the curved section is shown when the curvature ratio, ratio of curvature to tube diameter, is smaller than about 3.5. As the curvature ratio decreases below 3.5, a counter rotating vortex is found below the primary vortex in the cross section of the tube. Another dramatic change of the flow structure is the formation of streamwise separation zone when the curvature ratio is decreased below 1.25.