• Korean Journal of Plant Taxonomy
• /
• v.38 no.4
• /
• pp.539-545
• /
• 2008

Distribution of Carex miyabei Franch., formerly considered as an endemic species of Japan, in Korea is verified and reported here. It is distinguished from the morphologically similar species in the same section, such as C. lasiocarpa Ehrh. var. occultans (Franch.) $K{\ddot{u}}k.$, C. drymopila Turcz. ex Steud. var. abbreviata ($K{\ddot{u}}k.$) Ohwi, and C. glabrescens (Kük.) Ohwi, in having long-beaked and acutely 2-toothed perigynia which are densely covered with stout short hairs.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.9
• /
• pp.4827-4834
• /
• 2012

Tumor suppressor genes have received much attention for their roles in the development of human malignancies. Gelsolin has been found to be down-regulated in several types of human cancers, including leukemias. It is, however, expressed in macrophages, which are the final differentiation derivatives for the monocytic myeloid lineage, implicating this protein in the differentiation process of such cells. In order to investigate the role of gelsolin in leukaemic cell differentiation, stable clones over-expressing ectopic gelsolin, and a control clone were established from U937 leukaemia cells. Unlike the control cells, both gelsolin-overexpressing clones displayed retarded growth, improved monocytic morphology, increased NADPH and NSE activities, and enhanced surface expression of the ${\beta}$-integrin receptor, CD11b, when compared with the parental U937 cells. Interestingly, RT-PCR and western blot analysis also revealed that gelsolin enhanced p21CIP1 mRNA and protein expression in the overexpressing clones. Moreover, transient transfection with siRNA silencing P21CIP1, but not the control siRNA, resulted in a reduction in monocytic differentiation, accompanied by an increase in proliferation. In conclusion, our work demonstrates that gelsolin, by itself, is capable of inducing monocytic differentiation in U937 leukaemia cells, most probably through p21CIP1 activation.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.77
• /
• pp.69-89
• /
• 2018

The United States of America is one of the most favoring countries in which mandatory pre-arbitration clauses in the form of adhesion contract have been widely recognized and supported by courts and the Federal Arbitration Act. However, after the financial crisis in 2008 and the National Arbitration Forum scandal in 2009, in enacting the Dodd-Frank Wall Street Reform and Consumer Protection Act ('Dodd-Frank Act'), Section 1028(a) of the Act requires the newly created Consumer Financial Protection Bureau (CFPB) to provide Congress with a report on "the use of agreements providing for arbitration of any future dispute between covered persons and consumers". Section 1028(b) also grants the CFPB the authority to "prohibit or impose conditions or limitations on the use of an agreement between a covered person and a consumer for a consumer financial product or service providing for arbitration of any future dispute between the parties, if the Bureau finds that such a prohibition or imposition of conditions or limitations is in the public interest and for the protection of consumers." Pursuant to the Dodd-Frank Act, the CFPB issued a report entitled "2015 Arbitration Study: Report to Congress 2015 (Report)" in March 2015. This paper examines some major legal issues of the Report and makes a few recommendations for Korean financial institutions which entered into the U.S. financial market or has a plan to do so in the near future.

• The Korean Society of Law and Medicine
• /
• v.12 no.2
• /
• pp.295-316
• /
• 2011

If the medical staff privileges, which mean the eligibility to practice at open hospitals, are excluded in the United States, antitrust claims based on the violation of the Sherman Act have been raised a lot. The proliferation of these lawsuits in the United States, which are characterized as antitrust lawsuits, can be understandable situation. The reason is because doctors who don't belong to specific hospitals are seriously damaged, if the medical staff privileges are excluded and doctors cannot use facilities of open hospitals. In order to decide to allow the privileges of certain doctors, hospitals have to rely on peer review to maintain high quality of medical services, and it is not easy to find alternative of peer review in the professional areas like healthcare. However, there are possibilities that members of the peer review can abuse power to unfairly exclude privileges of potential competitors. In this sense, it is asserted in the U.S. antitrust lawsuits that the restraint of medical staff privilege can be the illegal restraint of trade in violation of section 1 of Sherman Act and can be monopolization or an attempt to monopoly by hospitals in violation of section 2 of Sherman Act. As Korea adopted open hospital system quite recently, there is still no case related with the exclusion of medical staff privileges. However, medical staff privilege system of Korea is not different from that of the United States in principle. Thus, the U.S. jurisprudence on the exclusion of medical staff privileges can be referred in the interpretation of "practice that interferes with or restricts the activities or contents of the business" based on Article 19.1.9 of Monopoly Regulation and Fair Trade Law of Korea.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.1
• /
• pp.61-72
• /
• 1999

The present study experimentally investigated the effect of refrigeration lubricant on the heat transfer performance in the straight sections and U-bend of a microfin tube evaporator by using R-22/mineral oil and R-407C/POE oil. The apparatus consisted of test section with U-bend, preheater, condenser, oil injection and sampling devices, magnetic pump, mass flow meter etc. The experimental parameters were oil concentration of 0 to 5 wt%, inlet quality of 0.1 to 0.5, mass flux of 219 and $400kg/m^2s$ and heat flux of 10 and $20kW/m^2$. The effects of parameters on the heat transfer coefficients were large in the order of inlet quality, mass flux and heat flux as oil concentration got increased. As oil concentration was increased, heat transfer coefficients were continuously decreased for R-22 and increased by 3% up to the concentration of 1% and then decreased for R-407C under the condition of large inlet quality, and small mass flux and heat flux. But, the heat transfer coefficients were increased up to the concentration of 3% and then decreased for both R-22 and R-407C refrigerants under the opposite conditions. The variation of enhancement factors for R-407C was under 50% of that for R-22 and the variation with respect to the positions in the test section was small. The pressure drops were increased for both R-22 and R-407C refrigerants as oil concentration was increased. The pressure drops for R-407C were smaller by the maximum of 18% than those for R-22.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.19 no.4
• /
• pp.195-205
• /
• 2015

Various non-seismic tie details are frequently used for one- and two-story small buildings because the seismic demand on their deformation capacities is not relatively significant. To evaluate the effects of the non-seismic tie details on the seismic performance of reinforced concrete columns, six square columns with a cross section of $400{\times}400mm$ and six rectangular columns with a cross section of $250{\times}640mm$ were tested. The anchorage details at both ends and spacing of tie hoops, along with the cross-sectional shape and the magnitude of axial load, were considered as the primary test parameters. Test results showed that square columns had higher stiffness and lower lateral deformation rather than rectangular columns. Both lap spliced tie and U-shaped tie provided comparable or improved seismic performance to $90^{\circ}$ hook tie in terms of maximum strength, ductility, and energy dissipation. The predicted curves with modeling parameters in ASCE41-13 were conservative for test results of lap spliced tie and U-shaped tie specimens since plastic behavior after flexural yielding could not be considered. For economical design, ASCE41-13 should be revised with various test results of tie details.

• The Journal of Society for e-Business Studies
• /
• v.15 no.2
• /
• pp.167-189
• /
• 2010

As adopting ubiquitous technology into civil engineering, new city model is suggested called U-City. This paper proposes the framework of U-City management center to support effective services operation. The aims of the framework are to provide the development and operation environment for U-City services. Basically, these objectives are achieved by adopting the semantic web service technology to the framework. In this paper, OWL-S is mainly conducted to represent the description of U-City services. In addition, this paper insists that fine grained unit services are required to guarantee reusability, compatibility, and scalability of the services on U-City management center. The documentations conducted by OWL-S are provided as an example of service descriptions. At the last section, this paper also presents the architecture of U-City management center which enables automatic service discovery, selection, composition and interoperation.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.1
• /
• pp.11-19
• /
• 2019

Purpose: This study evaluated the usability of and satisfaction with two types of computer-aided design (CAD) software among users who had experience with dental implant CAD software and those who did not. Materials and Methods: Dental technicians (n = 20) who had previous experience with dental implant CAD Software and students from the College of Dentistry (n = 12) who had never designed implant custom abutments were asked to evaluate two types of CAD Software, Exocad and Deltanine. In addition, the participants were asked to fill out a structured questionnaire (Section 1: Entering basic information and retrieving files; Section 2: Setting conditions before abutment design; Section 3: Setting abutment design; and Section 4: Overall satisfaction). For the statistical analysis of the collected data, Mann-Whitney U test was used (${\alpha}=.05$). Results: The ease of design and satisfaction with the implant CAD Software, evaluated with respect to 21 statements divided into four Stages, were significantly higher for Exocad in both groups for Secion 1. For Sections 2 and 3, participants with experience evaluated Deltanine to be significantly better. For Section 4, both groups evaluated Exocad Software to be better. Conclusion: Overall, the Exocad Software was evaluated as having better usability and offering greater satisfaction. However, in terms of performance in the core of the design process, i.e. Sections 2 and 3, Deltanine was rated higher by the experienced users. Thus, if the user interface design parts are supplemented, Deltanine CAD Software could be put to a wider use in clinics.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.45 no.3
• /
• pp.135-143
• /
• 2009

To study the behavioral reaction of common squid Todarodes pacificus, to different colors of LED light, individual distribution in the dark condition without LED light stimuli, individual distribution when four colors of light stimuli were at the sections of end and middle of water tank and the changes of gathering rates as the elapse of illuminating time were examined. When it was dark, the distribution of the fish in each section of the tank was U-shape regardless of the investigating time intervals, which means that Todarodes pacificus gathered at the both ends of the tank. The individual distribution when light stimuli were at the one end of the tank showed the tendency of gathering at the illuminated section and decreasing at the opposite section. There were 448 of them at the end of the tank when the light was blue, 352 when white, 302 when green and 132 when red. Thus the fish liked blue light the most, followed by white light. The variations of gathering rate at the both ends of tank as illuminating time elapsed showed the tendency of increasing at the light section (A section), however, it showed the tendency of decreasing at the darkest section (F section). The individual distribution showed the tendency of letter $\wedge$ of gathering at the center and decreasing at the both ends mostly when the light stimuli were at the middle section of tank. The gathering rates at the lighting section were 80.4% when red, 76.4% when white, 69.6% when green and 56.7% when blue. The fishes showed the affinity for the red light mostly, followed by the white light source. The red light and blue light showed the opposite when the light stimuli were at the one end of water tank. The variations of gathering rates as the elapse of time at the lighted section showed the tendency of gradual increasing in the four light sources. The color of light source showing the highest gathering rate within 25-30 minutes of light stimuli was the white, followed by the red.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.16 no.3
• /
• pp.251-260
• /
• 2003

A three dimensional (3-D) method of analysis is presented for determining the free vibration frequencies and mode shapes of deep, tapered rods and beams with circular cross section. Unlike conventional rod and beam theories, which are mathematically one-dimensional (1-D), the present method is based upon the 3-D dynamic equations of elasticity. Displacement components u/sup r/, u/sub θ/ and u/sub z/, in the radial, circumferential, and axial directions, respectively, are taken to be sinusoidal in time, periodic in , and algebraic polynomials in the r and z directions. Potential (strain) and kinetic energies of the rods and beams are formulated, the Ritz method is used to solve the eigenvalue problem, thus yielding upper bound values of the frequencies by minimizing the frequencies. As the degree of the polynomials is increased, frequencies converge to the exact values. Convergence to four-digit exactitude is demonstrated for the first five frequencies of the rods and beams. Novel numerical results are tabulated for nine different tapered rods and beams with linear, quadratic, and cubic variations of radial thickness in the axial direction using the 3D theory. Comparisons are also made with results for linearly tapered beams from 1-D classical Euler-Bernoulli beam theory.