• Korean Chemical Engineering Research
• /
• v.54 no.4
• /
• pp.533-542
• /
• 2016

We investigate fluidization characteristics of the mixture of rice husk, silica sand and rice husk ash as a preliminary study for valuable utilization of rice husk ash obtained from gasification of rice husk in a fluidized bed reactor. As experiment valuables, the blending ratio of rice husk and sand (rice husk: sand) is selected as 5:95, 10:90, 20:80 and 30:70 on a volume base. Rice husk ash was added with 6 vol% of rice husk for each experiment and air velocity to the reactor was 0~0.63 m/s. In both rice husk/sand and rice husk/sand/ash mixture, the minimum fluidization velocity (Umf) is observed as 0.19~0.21 m/s at feeding of 0~10 vol.% of rice husk and 0.30 m/s at feeding of 20 vol.% of rice husk. With increasing the amount of rice husk up to 30 vol.%, $U_{mf}$ can not measure due to segregation behavior. The mixing index for each experiment is determined using mixing index equation proposed by Brereton and Grace. The mixing index of the mixture of rice husk/sand and rice husk/sand/ash was 0.8~1 and 0.88~1, respectively. The optimum fluidization condition was found for the good mixing and separation of rice husk ash.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.11 no.2
• /
• pp.72-78
• /
• 2009

The demand for rainfall data in gridded digital formats has increased in recent years due to the close linkage between hydrological models and decision support systems using the geographic information system. One of the most widely used tools for digital rainfall mapping is the PRISM (parameter-elevation regressions on independent slopes model) which uses point data (rain gauge stations), a digital elevation model (DEM), and other spatial datasets to generate repeatable estimates of monthly and annual precipitation. In the PRISM, rain gauge stations are assigned with weights that account for other climatically important factors besides elevation, and aspects and the topographic exposure are simulated by dividing the terrain into topographic facets. The size of facet or grid cell resolution is determined by the density of rain gauge stations and a $5{\times}5km$ grid cell is considered as the lowest limit under the situation in Korea. The PRISM algorithms using a 270m DEM for South Korea were implemented in a script language environment (Python) and relevant weights for each 270m grid cell were derived from the monthly data from 432 official rain gauge stations. Weighted monthly precipitation data from at least 5 nearby stations for each grid cell were regressed to the elevation and the selected linear regression equations with the 270m DEM were used to generate a digital precipitation map of South Korea at 270m resolution. Among 1.25 million grid cells, precipitation estimates at 166 cells, where the measurements were made by the Korea Water Corporation rain gauge network, were extracted and the monthly estimation errors were evaluated. An average of 10% reduction in the root mean square error (RMSE) was found for any months with more than 100mm monthly precipitation compared to the RMSE associated with the original 5km PRISM estimates. This modified PRISM may be used for rainfall mapping in rainy season (May to September) at much higher spatial resolution than the original PRISM without losing the data accuracy.

• The Korean Journal of Air & Space Law and Policy
• /
• v.26 no.2
• /
• pp.203-237
• /
• 2011

Since USSR successfully launched its satellite "Sputnik"in 1957, many countries including US and USSR began military use of space, and engaged in arms race in space, which is against spirit and ideals of peaceful use of space as common heritage of mankind stipulated in many treaties such as Outer Space Treaty. With worsening Cold War between East and Western Bloc, this military use of space and arms race in space has been intensifying. Regarding the ideals of peaceful use of space, it is interpreted that military use of space is possible unless it does not have the purpose of aggression. The military use of space may have diverse forms such as attacking satellites in space, or attacking from satellites, making use of present and future technologies available which should include the use of nuclear and kinetic/hyper-speed weapons, laser, particle beams, near explosion, disturbance weapons in different directions (i.e., surface to space, space to space, and space to surface). Arms control is being implemented by the efforts of many countries in different formalities including legislature of international treaties under the auspices of UNCOPUOS and prohibition of weapons of mass destruction. Taking outstanding examples aiming at arms control by international community, there are confidence building measures (CBM), strengthening implementation of existing treaties, partial ban of nuclear tests, countryand regional approach, comprehensive approach and measures having legally binding force. While U.S. has surpassed other countries concerned in the area of military useof space, it withdrew from OST in early 2000s, thereby raising concern of international community. It requires concerted efforts of cooperationand implementation by international society to make sure peace of mankind and environmental conservation through arms control in space. Observing de facto possession of nuclear weapons by North Korea following series of nuclear tests and launching satellites, and efforts of launching rockets by South Korea, it is strongly needed for both countries to take part in arms control efforts by international community.

• The Korean Journal of Air & Space Law and Policy
• /
• v.28 no.2
• /
• pp.349-384
• /
• 2013

The Sputnik 1 launching in 1957 made the world recognize the necessity of international regulations on space development and activities in outer space. The United Nations established COPUOS the very next year, and adopted the mandate to examine legal issues concerning the peaceful uses of outer space. At the time, the military sector of the U.S.A. and the Soviet Union were in charge of the space development and they were not welcomed to discuss the prohibition of the military uses of outer space at the legal section in the COPUOS. Although both countries had common interests in securing the freedom of military uses in outer space. As the social and economic benefits derived from space activities have become more apparent, civil expenditures on space activities have continued to increase in several countries. Virtually all new spacefaring states explicitly place a priority on space-based applications to support social and economic development. Such space applications as satellite navigation and Earth imaging are core elements of almost every existing civil space program. Likewise, Moon exploration continues to be a priority for such established spacefaring states as China, Russia, India, and Japan. Recently, Companies that manufacture satellites and ground equipment have also seen significant growth. On 25 February 2012 China successfully launched the eleventh satellite for its indigenous global navigation and positioning satellite system, Beidou. Civil space activities began to grow in China when they were allocated to the China Great Wall Industry Corporation in 1986. China Aerospace Corporation was established in 1993, followed by the development of the China National Space Administration. In Japan civil space was initially coordinated by the National Space Activities Council formed in 1960. Most of the work was performed by the Institute of Space and Aeronautical Science of the University of Tokyo, the National Aerospace Laboratory, and, most importantly, the National Space Development Agency. In 2003 all this work was assumed by the Japanese Aerospace Exploration Agency(JAXA). Japan eases restrictions on military space development. On 20 June 2012 Japan passed the Partial Revision of the Cabinet Establishment Act, which restructured the authority to regulate Japanese space policy and budget, including the governance of the JAXA. Under this legislation, the Space Activities Commission of the Ministry of Education, Culture, Sports, Science, and Technology, which was responsible for the development of Japanese space program, will be abolished. Regulation of space policy and budget will be handed over to the Space Strategy Headquarter formed under the Prime Minister's Cabinet. Space Strategy will be supported by a Consultative Policy Commission as an academics and independent observers. By revoking Article 4 (Objectives of the Agency) of a law that previously governed JAXA and mandated the development of space programs for "peaceful purposes only," the new legislation demonstrates consistency with Article 2 of the 2008 Basic Space Law. In conformity with the principles laid down in the 1967 Outer Space Treaty JAXA is now free to pursue the non-aggressive military use of space. New legislation is the culmination of a decade-long process that sought ways to "leverage Japan's space development programs and technologies for security purposes, to bolster the nation's defenses in the face of increased tensions in East Asia." In this connection it would also be very important and necessary to create an Asian Space Agency(ASA) for strengthening cooperation within the Asian space community towards joint undertakings.

• Korea journal of population studies
• /
• v.28 no.2
• /
• pp.1-32
• /
• 2005

The optimum population of a society or country can be defined as 'the population growth path that maximizes the welfare level of the society over the whole generations of both the present and the future, under the paths allowed by its endowments of production factors such as technology, capital and labor'. Thus, the optimum size or growth rate of population depends on: (i) the social welfare function, (ii) the production function, and (iii)demographic economic interrelationship which defines how the national income is disposed into consumption(birth and education of children included) and savings on the one hand and how the demographic and economic change induced thereby, in turn, affect production capacities on the other. The optimum population growth path can, then, be derived in the process of dynamic optimization of (i) under the constraints of (ii) and (iii), which will give us the optimum population growth rate defined as a function of parameters thereof. This paper estimates the optimum population growth rate of Korea by: specifying (i), (ii), and (iii) based on the recent development of economic theories, solving the dynamic optimization problem and inserting empirical estimates in Korea as the parametric values. The result shows that the optimum path of population growth in Korea is around TFR=1.81, which is affected most sensitively, in terms of the size of the partial elasticity around the optimum path, by the cost of children, share of capital income, consumption rate, time preference, population elasticity of utility function, etc. According to a survey implemented as a follow up study, there are quite a significant variations in the perceived cost of children, time preference rate, population elasticity of utility across different socio-economic classes in Korea, which implied that, compared to their counterparts, older generation and more highly educated classes prefer higher growth path for the population of Korea.

• Food Science and Preservation
• /
• v.24 no.1
• /
• pp.93-99
• /
• 2017

Collagen synthesis is decreased and matrix metalloproteinase-1 (MMP-1) levels are increased in naturally aged human skin, and these alterations cause changes such as skin wrinkling and decreased elasticity. As a part of our ongoing search for bioactive ingredients, MMP-1 inhibitory and type-1 procollagen synthesis inducing activities of aqueous methanolic extract of manufactured gambir product from Uncaria gambir were investigated in in vitro bioassay systems. In addition, total phenolic contents were quantified using a spectrophotometric method. Among tested samples, 40% MeOH eluate from 80% methanolic extract of manufactured U. gambir using open column chromatography packed with Diaion HP-20 resin showed significant MMP-1 inhibitory activities with an $IC_{50}$ value of $15.6{\pm}1.3{\mu}g/mL$. Furthermore, type-1 procollagen synthesis promoting property of 40% MeOH eluate ($IC_{50}$ value; $6.9{\pm}0.7{\mu}g/mL$) from 80% methanolic extract of manufactured gambir was higher than other eluates. Additionally, the present investigation revealed that 40% MeOH eluate of manufactured gambir product contained a high level of total phenolic compounds. The result suggests a distinct relationship between anti-wrinkle activity and total phenolic contents, and manufactured gambir product could be considered a new effective source of natural bioactive ingredients. Systematic investigation of manufactured gambir product will be performed for further development of its biological properties.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.16 no.1
• /
• pp.39-50
• /
• 2014

This paper reviews the results of recent observations in the Yeonsuri valley of Mt. Youngmun during springtime (March to May) in 2012. Automated weather stations were installed at twelve sites in the valley to measure temperature and 2, 3 dimensional wind. We examined temporal and spatial characteristics of temperatures and wind data. The Yeonsuri valley springtime average temperature lapse rate between the top and bottom of the entire period is $-0.44^{\circ}C/100$ m. It can be changed by the synoptic weather conditions, the lapse rates is greatest in order of clear days ($-0.48^{\circ}C/100$ m), rainy ($-0.41^{\circ}C/100$ m) and cloudy days ($-0.40^{\circ}C/100$ m). In the night, the temperature inversion layer (thermal belt) and the cold pool are formed within the valley. In addition, we measured temperature and wind distribution from the bottom to 3.5 m, the cold layers existed up to 1.5 m, which were affected by ground mixed layer. The results will provide useful guidance on agricultural practices as well as model simulations.

• Journal of Intelligence and Information Systems
• /
• v.16 no.2
• /
• pp.55-72
• /
• 2010

Recently, the battlefield environment has changed from platform-centric warfare(PCW) which focuses on maneuvering forces into network-centric warfare(NCW) which is based on the connectivity of each asset through the warfare information system as information technology increases. In particular, C4I(Command, Control, Communication, Computer and Intelligence) system can be an important factor in achieving NCW. It is generally used to provide direction across distributed forces and status feedback from thoseforces. It can provide the important information, more quickly and in the correct format to the friendly units. And it can achieve the information superiority through SA(Situational Awareness). Most of the advanced countries have been developed and already applied these systems in military operations. Therefore, ROK forces also have been developing C4I systems such as KJCCS(Korea Joint Command Control System). And, ours are increasing the budgets in the establishment of warfare information systems. However, it is difficult to evaluate the C4I effectiveness properly by deficiency of methods. We need to develop a new combat effectiveness evaluation method that is suitable for NCW. Existing evaluation methods lay disproportionate emphasis on technical factors with leaving something to be desired in human factors. Therefore, it is necessary to consider technical and human factors to evaluate combat effectiveness. In this study, we proposed a new Combat Effectiveness evaluation algorithm called E-TechMan(A Combat Effectiveness Evaluation Algorithm Considering Technical and Human Factors in C4I System). This algorithm uses the rule of Newton's second law($F=(m{\Delta}{\upsilon})/{\Delta}t{\Rightarrow}\frac{V{\upsilon}I}{T}{\times}C$). Five factors considered in combat effectiveness evaluation are network power(M), movement velocity(v), information accuracy(I), command and control time(T) and collaboration level(C). Previous researches did not consider the value of the node and arc in evaluating the network power after the C4I system has been established. In addition, collaboration level which could be a major factor in combat effectiveness was not considered. E-TechMan algorithm is applied to JFOS-K(Joint Fire Operating System-Korea) system that can connect KJCCS of Korea armed forces with JADOCS(Joint Automated Deep Operations Coordination System) of U.S. armed forces and achieve sensor to shooter system in real time in JCS(Joint Chiefs of Staff) level. We compared the result of evaluation of Combat Effectiveness by E-TechMan with those by other algorithms(e.g., C2 Theory, Newton's second Law). We can evaluate combat effectiveness more effectively and substantially by E-TechMan algorithm. This study is meaningful because we improved the description level of reality in calculation of combat effectiveness in C4I system. Part 2 will describe the changes of war paradigm and the previous combat effectiveness evaluation methods such as C2 theory while Part 3 will explain E-TechMan algorithm specifically. Part 4 will present the application to JFOS-K and analyze the result with other algorithms. Part 5 is the conclusions provided in the final part.

• Archives of design research
• /
• v.19 no.2 s.64
• /
• pp.73-80
• /
• 2006

The main purpose of this study is to help develop the productional system of the three dimensional digital animation domestically. Many 30 digital animation projects are being developed and finished with foreign computer graphics technology. However, the 3D animation market in Korea is not as good as the ones in other countries. One of the most significant problems is the lack of a program of study in Korea concerning productional systems used to create 3D animation. We previously imported an advanced productional system from the U.S., which was adaptable to big projects, and consequently, expanded the international digital animation market. Now, we need to develop a new production system which is fully adaptable to the Korean market. A non-sequential system of 3D digital animation tailored for small projects is more adaptable to domestic industry than the sequential system known as the 'Pipeline system.' A non-sequential system is good for small productions that are trying to create animation on a limited budget. The workers in this system can learn to make animation fast and effectively. They can also learn how to discuss with the others in order to avoid duplication of action. In contrast, in the Pipeline System, many workers repeat confirmation steps during the process for the same animations. The benefit of the non-sequential system is that the worker's interest and education can speed up production, because he/she can quickly learn every step of the animation process instead of just doing a particular job which does not allow him/her to observe the other steps involved. The 'animatic' step is the most important in the non-sequential system. The final animation is produced from the animatic. It is developed from scratch through to the final product but only after the agreement of all the workers, including a director.

• Applied Biological Chemistry
• /
• v.49 no.3
• /
• pp.186-191
• /
• 2006

In the present study, an attempt has been made to produce hybrid yeast strains of different useful and dominant characteristics. The hybrid yeast strains were produced by electrofusion and their genetic analysis were performed by RAPD-PCR (random amplified polymorphic DNA-polymerase chain reaction). The protoplast of Saccharomyces cerevisiae KCTC 7904 and Zygosaccharomyces rouxii KCTC 7966 were obtained above 92% when treated with lyticase at $30^{\circ}C$ for $60{\sim}90$ min after the pretreatment of $1{\sim}2%$ 2-mercaptoethanol at $30^{\circ}C$ for $15{\sim}20$ min. The fusant was produced from paired protoplast stage under the electric pulse at high frequency conditions (1.5 MHz/50 pV, 615 $V/256\;{\mu}sec$) within glass-platinum made electrofusion chamber. Changes in RAPD patterns in mother cells and hybrid cells proved that the fusant contains two types of yeast gene originated from its parent. Furthermore, fermentation characters exhibits by the fusant cell confirmed its genetic changes. These results suggest that genetically stable hybrid yeast strains of economic importance can be produced by electrofusion technique and these electrofused yeast cells have an enormous impact in biotechnology and biomedicine.