• 제목/요약/키워드: U-Mo

검색결과 623건 처리시간 0.039초

페로브스카이트 광흡수층을 활용한 고성능 MoS2 기반 광검출기 구현

  • 오애리;심재우;박진홍
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
    • /
    • pp.199.2-199.2
    • /
    • 2015
  • 전이금속 칼코겐화합물(TMD)은 2차원 박막 물질로, 그래핀과 함께 차세대 사물인터넷에 적용할 수 있는 전자소자의 소재로 활용될 것으로 기대되고 있다. 특히 TMD는 그래핀과 다르게 1.2 eV 이상의 넓은 밴드갭을 지녀, 기존 실리콘 기반 반도체 소자를 대체할 차세대 물질로 각광받고 있다. TMD는 또한 실리콘 등의 3차원 반도체보다 광전효율이 뛰어나며, 이를 활용한 광전소자의 개발 및 연구가 활발히 진행되고 있다. 그러나 TMD는 그 두께가 나노미터 단위로 매우 얇아 광흡수율이 매우 떨어지는 단점이 있다. 우리는 이러한 TMD 기반 광전소자의 광흡수율을 향상시키기 위해 광전효율이 매우 뛰어난 페로브스카이트(Perovskite)를 TMD 채널 위에 덮음으로써, 이종접합 광전소자를 구현하였다. TMD 물질은 이황화 몰리브데넘($MoS_2$)을 선택하였으며, 광흡수층으로 선택한 페로브스카이트는 $MAPbI_3$을 스핀 코팅을 통해 TMD 채널 층에 접합하였다. 우리는 Photoluminescence 및 UV-Vis 측정을 통해 페로브스카이트 및 페로브스카이트/$MoS_2$ 층의 광특성을 측정하여 페로브스카이트에서 생성된 광캐리어가 확산되어 $MoS_2$에 전달되는 것을 확인하였다. 우리는 추가로 4가지 서로 다른 파장대의 레이저(520, 655, 785, 850 nm)를 이용하여 페로브스카이트 광흡수층이 있을 때와 없을 때의 $MoS_2$ 광검출기의 성능 변화를 관찰하였다.

  • PDF

GPS 특허동향 (Patent Survey on GPS)

  • 배상진;여운동;김재우;성경모
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2004년도 심포지엄 논문집 정보 및 제어부문
    • /
    • pp.156-158
    • /
    • 2004
  • The patent analysis of GPS technologies is performed by using a patent mapping method. The number of U.S.,Japanese and Korean patent applications are 1,819, 1,715 and 1,277 cases respectively. U.S and Japanese patents are mainly composed of hardware technologies. But, Korean patents are mainly composed of service technologies.

  • PDF

Development of fission 99Mo production process using HANARO

  • Lee, Seung-Kon;Lee, Suseung;Kang, Myunggoo;Woo, Kyungseok;Yang, Seong Woo;Lee, Junsig
    • Nuclear Engineering and Technology
    • /
    • 제52권7호
    • /
    • pp.1517-1523
    • /
    • 2020
  • The widely used medical isotope technetium-99 m (99mTc) is a daughter of Molybdenum-99 (99Mo), which is mainly produced using dedicated research reactors from the nuclear fission of uranium-235 (235U). 99mTc has been used for several decades, which covers about 80% of the all the nuclear diagnostics procedures. Recently, the instability of the supply has become an important topic throughout the international radioisotope communities. The aging of major 99Mo production reactors has also caused frequent shutdowns. It has triggered movements to establish new research reactors for 99Mo production, as well as the development of various 99Mo production technologies. In this context, a new research reactor project was launched in 2012 in Korea. At the same time, the development of fission-based 99Mo production process was initiated by Korea Atomic Energy Research Institute (KAERI) in 2012 in order to be implemented by the new research reactor. The KAERI process is based on the caustic dissolution of plate-type LEU (low enriched uranium) dispersion targets, followed by the separation and purification using a series of columns. The development of proper waste treatment technologies for the gaseous, liquid, and solid radioactive wastes also took place. The first stage of this process development was completed in 2018. In this paper, the results of the hot test production of fission 99Mo using HANARO, KAERI's 30 MW research reactor, was described.

Pilot-Scale Production of Cellulase Using Trichoderma reesei Rut C-30 Fed-Batch Mode

  • Lee, Sang-Mok;Koo, Yoon-Mo
    • Journal of Microbiology and Biotechnology
    • /
    • 제11권2호
    • /
    • pp.229-233
    • /
    • 2001
  • Trichoderma reesei Rut C-30 produced high levels of ${\beta}$-glucosidase, endo-${\beta}$-glucosidase, endo-${\beta}$-1,4-glucanase, and exo-${\beta}$-1,4-glucanase. In pilot-scale production (50-1 fermentor), productivity and yield of CMCase (carborymethyl cellulose) and FPase (filter paper activity) were 273 U/ml and 35 U/ml, and 162 FPU/l.h and 437 FPU/g, respectively. The fed-batch techniques were used to improve enzyme activities with constant cell concentration. The acidity was an important parameter and controlled at pH 3.9 and 5.0 by automatic addition of ammonium hydroxide. Cellulase powder was prepared by ammonium sulfate precipitation and its CMCase and FPase activities were 3,631 U/g and 407 U/g, respectively.

  • PDF

u-캠퍼스 환경에서의 모바일 교육 서비스 시스템 설계 (Design of a Mobile Learning Service System in u-Campus Environment)

  • 안병태;박경모
    • 한국정보과학회:학술대회논문집
    • /
    • 한국정보과학회 2012년도 한국컴퓨터종합학술대회논문집 Vol.39 No.1(D)
    • /
    • pp.35-37
    • /
    • 2012
  • 원격교육과 e-러닝의 차세대 형태로 모바일 교육에 대한 관심이 급증하고 있다. 이러한 모바일 교육은 스마트폰을 중심으로 전개되고 있으며 사이버 대학교뿐만 아니라 일반 오프라인 대학에서도 적극적인 움직임을 보이고 있다. 본 논문에서는 u-캠퍼스 환경기반에서의 모바일 교육 서비스 시스템을 설계하였다. 모바일 교육 서비스 시스템은 u-캠퍼스 환경기반에서 교육 수요자들인 학생들에게 시공간의 제약 및 디바이스에 제약이 없는 학습 환경 시스템을 제공하고 모바일 캠퍼스 플랫폼 기반의 m-러닝 시스템을 설계한 것이다.

Cellulase Production in Fed-Batch Culture by Trichoderma reesei Rut C30

  • Yu, Xiao-Bin;Yun, Hyun-Shik;Koo, Yoon-Mo
    • Journal of Microbiology and Biotechnology
    • /
    • 제9권1호
    • /
    • pp.44-49
    • /
    • 1999
  • Cellulase production by fed-batch cultivation of Trichoderma reesei Rut C30 with various initial concentrations of Solka Floc in 1 % wheat bran-containing medium was investigated. The cellulase activity and productivity increased with initial Solka Floc concentration up to 5%. When a total Solka Floc concentration of 90 g/l was used for cellulase production, CMC (carboxymethyl cellulose) and FP (filter paper) activities, productivity, and yield were 359.7 U/ml, 30.61 U/ml, 161 FPU $L^{-1}$ $h^{-1}$, and 340 FPU $g^{-1}$, respectively. It was important to maintain a high cell concentration during cellulase production to obtain high cellulase activity and productivity. Cellulase powder was prepared by ammonium sulfate precipitation: FP activity was 396.7 U/g and CMC activity was 6481 U/g.

  • PDF

콤플렉스법을 이용한 U-채널 성형의 스프링백 강건 설계 (Robust design of springback in U-channel forming using complex method)

  • 인정제;김경모;박종천
    • 한국기계가공학회지
    • /
    • 제12권1호
    • /
    • pp.117-125
    • /
    • 2013
  • Variations of springback in stamped parts are induced by the uncontrollable noises including the variation of incoming material properties, lubrication and other forming process parameters. Reduction of springback variation is very important during springback compensation processes on stamping dies and assembly processes. To reduce the variation of springback, a robust optimization methodology which uses complex method combined with orthogonal array is proposed. The proposed method is applied to the robust design of U-channel die for the reduction of side wall curl. It is shown that the drawbead and die radius of U-channel draw die can be effectively optimized by the proposed method.