• 제목/요약/키워드: U-Car

검색결과 108건 처리시간 0.028초

음향방출법을 이용한 Type 1 및 Type 2 가스실린더의 정량적 평가기준에 대한 연구 (Study of Quantitative Assessment Standard for Type 1 and Type 2 Gas Cylinders Using Acoustic Emission Testing)

  • 김동현;이상범;김경훈;윤동진;배동명
    • 비파괴검사학회지
    • /
    • 제34권2호
    • /
    • pp.176-183
    • /
    • 2014
  • 음향방출법은 차량 내부에 장착된 실린더의 경우 분해없이 동작중에 실시간으로 측정이 가능하므로 다른 비파괴평가 방법보다 많은 장점을 가지고 있다. 이러한 장점을 가지고 음향방출법은 미국 교통부(DOT)로부터 수압시험의 대체로 압력용기의 안정성 평가 방법으로 승인되었다. 본 논문은 압력용기 제조사로부터 UT 결함용기 및 결함이 있는 이음매 없는 압력용기인 Type 1과 Type 2에 대한 정량적인 평가기준에 대한 연구를 수행하였다. Type 1의 경우, ASTM E 1419-02를 기준으로 113L 규격의 준비된 용기로 피로반복시험을 통해 크랙의 성장부터 누설까지 경향을 파악하였다. Type 2의 경우, ASTM E 2191-02를 기준으로 119L 건전한 용기와 수압가압으로 불량용기를 용기에 slow-fill 방법으로 검증하였다. 본 연구에서 음향방출법을 이용한 Type 1과 Type 2의 시험은 불량용기와 건전한 용기를 효과적으로 구분할 수 있었다.

LA-ICP-MS를 이용한 한국 자동차 유리의 미량원소 분석 (Trace element analysis of korean car windshield using LA-ICP-MS)

  • 민지숙;최만식;허상철;김재균
    • 분석과학
    • /
    • 제22권3호
    • /
    • pp.235-246
    • /
    • 2009
  • 제조 공장의 구분이 가능한지 검토하기 위하여 LA-ICP-MS를 이용한 한국 자동차 전면 유리의 미량원소 분석을 실시하였다. 먼저 Si를 내부 표준물질로 하여 표준품 NIST 610, 612, 614과 616을 분석하여 검량선을 작성하였다. 시료와 표준품은 24원소에 대해 정량을 실시하였고 LOQ는 0.11 mg/kg(Ti)-4.91 mg/kg(Ca) 였다. 2개 공장의 11개 시료에 대하여 각각 5개씩의 위치에 따른 부시료를 분석하였다. 검출한계이하의 원소들(Cu, Cr, Cd와 Ni), 표준품에 존재하지 않는 원소들(Ti, Pr, Mg, Nb, Nd)과 균질성에 문제가 있는 원소들(Pb와 Sn)은 분석 대상 원소에서 제외하였다. 제조공장과 제조년도와 관련하여 삼각 다이어그램을 그려 본 결과 구별의 가능성을 볼 수 있었으며 Mn, Ce와 Rb를 토대로 한 정준 판별 분석식에 의해 제조공장의 구별이 가능하였다.

생물보전지수(Index of Biological Integrity) 및 서식지 평가지수 (Qualitative Habitat Evaluation Index)를 이용한 평창강의 수환경 평가 (An Evaluation on Health Conditions of Pyong-Chang River using the Index of Biological Integrity (IBI) and Qualitative Habitat Evaluation Index(QHEI))

  • 정승현;최신석;안광국
    • 생태와환경
    • /
    • 제34권3호통권95호
    • /
    • pp.153-165
    • /
    • 2001
  • 본 연구에서는 1999년 9월에서 2000년 8월 기간동안 생물 보전지수(Index of Biological Integrity, IBI) 및 질적 서식지 평가 지수(Qualitative Habitat EvaluationIndex, QHEI)를 이용하여 한강수계의 상류에 위치하는 평창강의 건강도를 평가하였다. 조사 결과, 11개 메트릭을 이용한 평균 IBI값은 49(범위: 51${\sim}$45)로서 Karr(1981)가 제시한 기준에 의거할 때 하천 건강도(Stream Health)는 Good${\sim}$Excellent상태 사이에 있었고, 평균 QHEI값은 88(범위: 94${\sim}$76)로서 물리적 서식지측면에서의 건강도는 최적상태 (Comparable to reference) 혹은 생물의 서식에는 적합한 상태 (Supporting)를 보였다. 지점별 TBI값의 비교에 따르면 상, 하류사이에 미약한 차이를 보인 반면, 각 조사지점의 QHEI값은 이용된 변수특성에 따른 변이를 보였다. 1차 회귀분석 결과에 따르면, QHEI값은 하천차수(Streamorder)와 유의한 관계가 없었다(p=1.8; n=7). 이러한 결과는 하천차수가 증가해도 점 오염원의 부재로 인해 서식지에는 큰 변화가 없었기 때문으로 사료되었다. Feed guild분석에 따르면, 식충성 어류(Insectivore)의 상대 풍부도는 전체 어종의85.1%를,잡식성 어류(Omnivore)및 육식성 어류(Car-nivore)는 각각 전체 어종의 3.5%및 0.3%를 차지하였다. 내성도의 경우, 서식지 파괴 및 오염에 쉽게 감소되는 민감종의 상대 빈도는 75.0%, 내성종은 4.6%로서 뚜렷한 차이를 보였으며, 도입종(exotics species)및 비정상종(anomalies species)의 개체는 채집되지 않았다. 또한 회귀분석 결과, 지점별 평균 IBI값의 변이는 QHEI값의 변화에 의해 57%까지 설명되었다($R^2$=0.57,p<0.05,n=7).본 조사에서 산정된 개개 메트릭 특성, IBI값 및 QHEI값의 상호관계에 따르면, 평창강의 현재 수 환경은 생물 서식에 적절한 상태에서 최적 상태의 범위에 있음이 분명하나, 오염 및 물리적 서식지가 파괴될 경우 감소될 수 있음을 시사하였다.

  • PDF

Stellite bearings for liquid Zn-/Al-Systems with advanced chemical and physical properties by Mechanical Alloying and Standard-PM-Route

  • Zoz, H.;Benz, H.U.;Huettebraeucker, K.;Furken, L.;Ren, H.;Reichardt, R.
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2000년도 춘계학술강연 및 발표대회 강연 및 발표논문 초록집
    • /
    • pp.9-10
    • /
    • 2000
  • An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

  • PDF

토미즘의 인간적 행위에서 '자기초월'의 의미 (La signification du dépassement de soi dans le Thomisme)

  • 이명곤
    • 철학연구
    • /
    • 제105권
    • /
    • pp.49-74
    • /
    • 2008
  • 본 연구의 목적은 토미즘에 있어서 '인간적 행위'가 가지는 '자기초월의 성격'을 조명하는 데에 있다. 토미즘에 있어서 이성과 의지를 가진 인간의 본성은 궁극적인 목적에로 지향성을 가진 것이며, 따라서 '인간의 행위'가 아닌 '인간적 행위'란 이러한 본성에 적합한 행위를 말하며, 현재의 상태보다 더 낳은 상태를 지향하는 '자기초월'을 성격을 가지는 것이다. 물론 이러한 자기초월적 성격을 본질적으로 가지게 되는 인간적 행위의 근거는 인간의 형상인 이성혼(理性魂)이 '자립적인 형상'이라는 데에 있다. 토마스 아퀴나스에게 있어서 이러한 인간적 행위의 자기초월의 성격은 크게 세 가지 단계를 거친다고 볼 수 있는데, (1)자연적 진보의 질서 안에서의 초월, (2)도덕적 질서 안에서의 자기초월 그리고 (3)종교적 삶에 있어서 자기초월이 그것이다. 자연적 진보에서는 우선적으로 이성적 영혼의 특성에서 드러나는데, 아퀴나스는 인간의 이성적인 덕을 '나약함 안에서의 충만함'이라고 규정하는데, 이는 이성적인 덕이란 '외적 감각능력들의 목적지($finalit{\acute{e}}$)'로서 고려하기 때문이다. 외적 감각을 통해서 인간은 '감각적 상(especies sensibilis)'들을 수용하며, 이미지들을 보존하고, 이 이미지들은 기억 혹은 추억이라는 형태로 그의 실존의 일부가 되며, 자기의식을 의미하는 정신적인 실재가 되는 것이다. 따라서 토마스에게 있어서 이성의 덕은 단순히 사변적인 능력이 아니라, '되어짐'의 질서, 충만함의 질서 안에 있는 것이다. 바로 이 때문에 토마스는 이성(ratio)의 능력을 '생성(generatio)'에 비유하고 있으며, 지성(intellectus)을 존재(esse)에 비유하고 있는 것이다. 즉 이성은 감각을 초월하고, 지성은 이성을 초월하는 것이다. 도덕적 질서 안에서의 자기초월은 의식의 진보와 관련되어 있는데, 인간의 의식은 언제나 이중적인데, 일차적으로 외부대상에 대한 인식이요, 이차적으로 이러한 외부대상에 대한 인식의 결과라 할 수 있는 자기의식(contientia)이다. 즉 이러한 외부대상에 대한 인식은 근본적으로 자기의식 혹은 자기인식을 목적으로 하며, 자기인식에서 완성된다. 자기의식은 '자기동일성'에 대한 의식을 말하는데, 여기서 인간의 특유한 도덕적 행위가 발생한다. 즉 당위 혹은 의무라는 것은 언제나 '자기동일성'에 대한 적합성을 의미하는 것이며, 이러한 행위가 지속적일 때, 도덕적 삶이 발생하는 것이다. 도덕적 삶이 그 자체 초월적인 성격을 가지는 것은 '자기동일성'에 적합한 인간적 행위란 언제나 '보다 나은 것' 보다 '이상적인 삶'을 지향하기 때문이다. 종교적 삶에 있어서 토미즘의 특성을 보다 잘 부각하기 위해서 본 논문에서는 키엘케고올의 종교적 삶에 대한 초월성을 우선적으로 고찰하고 있는데, 그에 의하면 종교적 삶에 있어서 초월적 성격은 '절대적 차원의 초월'로서 근본적으로 합리적으로 기술되거나 표현될 수 있는 모든 문화적인 인간적인 지평을 넘어서는 '초월' 즉 '절대적 초월($d{\acute{e}}passement$ absolu)을 의미하는 것이다. 반면 아퀴나스에게 있어서 신과 인간 사이의 '친근성($affinit{\acute{e}}$)'은 수용된 덕들(virtutes infusas)이 있는 곳에는 반드시 일종의 종교적인 초월이 수반된다. '가능태'중에 있는 하나의 (수용된)덕이 '현실태'가 되는 곳에는 반드시 '자기초월'의 행위가 수반되는 것이다. 왜냐하면 이러한 수용된 덕의 국면은 신과 인간 사이의 소통을 말해주고 있기 때문이며, 이는 곧 '인간적인 것'에서 '신성한 것'에로의 초월을 암시하고 있기 때문이다. 이러한 아퀴나스의 사유는 구체적이고 개별적인 한 인간의 종교적인 삶 안에서 '자기초월'이 이루어지는 곳에는 언제나 신의 섭리가 개입하고 있다는 실재론적인 사유를 가능하게 하고 있는 것이다.

항공자유화정책상 상용고객우대제도의 제휴성과와 국제경쟁에 관한 연구 (Open Skies Policy : A Study on the Alliance Performance and International Competition of FFP)

  • 서명선;조주은
    • 항공우주정책ㆍ법학회지
    • /
    • 제25권2호
    • /
    • pp.139-162
    • /
    • 2010
  • 국제운송에 있어서 항공자유화 정책(open skies police)은 하늘의 자유 또는 하늘의 개방이란 의미를 내포하고 있다. 규범적으로 여러 형태의 운송권을 타 국가에 허용하는 개방 정책이나 국제 항공운송에 있어서 자유경쟁 정책이다. 미국의 경우, 1978년 항공규제완화 이후 경쟁력을 갖춘 대형 항공사들이 시장 기회가 많은 국제 항공시장에서 경쟁할 수 있도록 하기위해 네델란드와 항공자유화 협정을 체결한 것을 시작으로 많은 국가들이 항공자 유화 협정을 맺고 있으며, 우리나라의 경우는 20여개국과 항공자유화 협정을 체결하고 있는 상태이다. 상용고객우대제도(Frequent Flyer Program : FFP)는 미국 정부의 항공법 규제 완화 이후 항공 운임 전략의 일환으로 포괄적 마케팅 제휴의 한 부분이다. 자사 항공편을 이용하는 고객을 회원제로 관리하는 제도로서, 승객들의 탑승이나 기타 이용 실적에 따라 마일리지를 부여하여 누적된 마일리지가 일정한 기준에 도달하면 다양한 유형적 보상을 실시하는 개념이다. 상용고객 우대제도는 초창기에는 고객확보를 위한 마케팅 중심으로 형성되었으나, 항공사간의 치열한 경쟁으로 인해 경영이 점점 더 어려워지고 있는 상황에서 항공사들은 상용고객우대제도를 항공사 경영성과를 높이는 마케팅의 중요한 전략의 수단으로 활용하고 있다. 따라서 항공사들은 충성고객을 확보하기 위해 고객의 니즈를 효과적으로 파악할 필요가 있다고 판단한다. 항공사 상용고객우대제도에 따른 성과가 국제 경쟁에 미치는 영향은 다양하게 나타날 수 있다. 첫째, 노선망을 확대를 통해 항공 시장을 확보할 수 있다. 둘째, 운항빈도를 증대시킴에 따라 고객에게 항공 상품의 공급 능력을 증대시키게 될 수 있을 것이다. 셋째, 새로운 시장에 우선적으로 진입함으로써 경쟁 항공사를 견제하는 효과가 나타날 것 이라고 생각한다. 그럼에도 불구하고 항공사 상용고객우대제도에 대한 실증적 연구는 매우 미비하다. 따라서 본 연구에서는 상용고객우대제도의 전략적 제휴 유형을 검토한 후 이의 제휴 성과와 국제경쟁에 미치는 영향을 알아보고자 한다. 주요 국가들의 항공사 전략적 제휴는 항공자유화 정책상 세계적인 추세이다. 우리나라의 경우에도 국적 항공사들의 발전과 경쟁력 확보를 위해서는 보다 더 현실적인 항공자유화 협정이 진행되어야 할 것이다. 본 논문은 항공자유화 정책 상 항공사 상용고객우대제도의 제휴 성과와 국제경쟁에 관한 연구이다. 본 연구에서는 5개 글로벌 제휴 그룹(star, oneworld, wings, qualiflyer, skyteam)을 대상으로 선정하여 제휴 그룹의 항공사가 보유한 자원구조와 정보기술수준이 제휴 유형에 미치는 성과에 대한 실증 연구를 실시하고자 하였으며 가설 검정을 위해 일원분산분석과 회귀분석을 사용하였다. 규모가 큰 대형항공사 이거나 중소 규모의 지역 항공사일지라도 세계적인 네트워크 와 조직력을 갖춘 제휴 그룹에 참여하는 항공사는 높은 성과와 국제 경쟁력을 확보할 수 있다고 판단한다. 항공사 승객의 경우, 회원 가입항공사의 호텔과 렌트카, 면세점, 여행사 등의 제휴 네트워크를 활용하여 항공사 탑승 이외의 마일리지 획득하는 것외에도 관련된 서비스 혜택에 대한 관심과 선호도가 높으므로, 우리나라의 항공사들은 항공사간 제휴뿐 만 아니라 호텔 등 타 산업과의 다각적으로 제휴를 통해 공격적 마케팅을 실행해야 한다.

  • PDF

어린이의 외상성 치아손상에 관한 연구 (A Study on the Traumatic Teeth Damage of Children)

  • 유수민;박호원
    • 치위생과학회지
    • /
    • 제4권1호
    • /
    • pp.21-25
    • /
    • 2004
  • 현대사회에서는 생활환경의 변화와 교통사고의 증가에 의해 해마다 소아의 외상의 증가하고 있는데 구강조직에 대한 외상성 손상을 완전히 치단하는 데에는 한계가 있어 외상성 치아손상에 관한 실태를 조사 분석함으로써 외상처치와 예방에 필요한 기초자료를 제시하고자 강릉대학교 치과병원 소아치과에 2000년 10월 4일부터 2004년 2월 27일까지 외상을 주소로 내원한 113명의 환자를 대상으로 조사 분석한 결과 다음과 같은 결론을 얻었다. 1. 연구대상자의 성별에서는 2.05:1의 비율로 남자의 경우가 외상빈도가 더 높게 나타났다. 평균 연령은 남자 5.27세, 여자 5.27세로 차이가 없었고, 전체 연령중 2세에서 외상환자가 제일 많았다(21.2%) 2. 외상부위별 내원기간을 조사한 결과 유치는 당일(34.4%)에 내원한 경우가 가장 많았고, 영구치는 1일 후(38.8%)에 내원한 경우가 가장 많았다. 3. 외상부위별 치아손상의 원인을 분석한 결과 넘어진 경우가 유치 59.4%, 영구치 55.1%, 물체에 부딪친 경우 유치 26.6%, 영구치 26.5%로 나타나 대부분 넘어지거나 부딪쳐서 외상이 발생한 것으로 나타났다. 4. 성별에 따른 치아손상이 발생한 장소는 가정인 경우가 남자 42.1%, 여자 35.1%로 남녀모두 가정에서 외상이 가장 많이 발생하였다. 외상부위에 따른 치아손상 발생한 장소로는 유치는 가정(59.4%)에서 가장 많이 발생하였고, 영구치는 유치원 및 학교(28.6%)에서 가장 많이 발생하였다. 5. 외상부위에 따라 치아손상을 받은 치아의 수를 분석한 결과 유치는 2개(56.3%), 1개(31.3%), 3개와 4개 이상 각각(6.3%), 순으로 나타났으며, 영구치는 2개(46.9%), 1개(28.6%) 4개 이상(16.3%), 3개(8.2%) 순으로 영구치인 경우 4개 이상인 경우도 비교적 높게 나타났다. 6. 성별에 따른 치아손상이 발생한 부위로는 남자 유치 56.6%, 영구치 43.4%, 여자 유치 56.8%, 영구치 43.2%로 남녀 모두 유치에서 외상이 가장 많이 발생하였다. 7. 유치와 영구치의 치아손상부위는 상악 전치부가 거의 대부분을 차지하고, 유치(75%)와 영구치(63.8%) 모두 상악 중절치에서 외상율이 높게 나타났다. 8. 전체적인 외상성 치아손상에 따른 외상종류의 조사결과는 동요 30.2%, 치관파절 28.0%, 함입 14.7%, 진탕 8.9%, 완전 탈구 7.1%, 정출 2.2%, 변위 1.8% 순으로 나타났다. 유치와 영구치별로 외상성 치아손상의 종류를 분류하였을 때 유치는 동요(35.8%)가 가장 많이 나타났고, 파절에서 치관파절은 영구치(44.8%)에서 많이 발생하였다. 9. 외상부위에 따른 외상성 치아손상처치는 처치없이 경과관찰을 한 경우가 유치는 43.2%, 영구치 38.9%로 나타났으며, 치료한 경우 유치는 치수절제술(22.0%), 영구치는 임시적산부식레진수복(19.5%)을 가장 많이 사용하였다.

  • PDF

쇼핑 가치 추구 성향에 따른 쇼핑 목표와 공유 의도 차이에 관한 연구 - 전자제품 구매고객을 중심으로 (Shopping Value, Shopping Goal and WOM - Focused on Electronic-goods Buyers)

  • 박경원;박주영
    • 마케팅과학연구
    • /
    • 제19권2호
    • /
    • pp.68-79
    • /
    • 2009
  • The interplay between hedonic and utilitarian attributes has assumed special significance in recent years; it has been proposed that consumption offerings should be viewed as experiences that stimulate both cognitions and feelings rather than as mere products or services. This research builds on previous work on hedonic versus utilitarian benefits, regulatory focus theory, customer satisfaction to address two question: (1) Is the shopping goal at the point of purchase different from the shopping value? and (2) Is the customer loyalty after the use different from the shopping value and shopping goal? We surveyed 345 peoples those who have bought the electronic-goods within 6 months. This research dealt with the shopping value which is consisted of 2 types, hedonic and utilitarian. Those who pursue the hedonic shopping value may prefer the pleasure of purchasing experience to the product itself. They tend to prefer atmosphere, arousal of the shopping experience. Consistent with previous research, we use the term "hedonic" to refer to their aesthetic, experiential and enjoyment-related value. On the contrary, Those who pursue the utilitarian shopping value may prefer the reasonable buying. It may be more functional. Consistent with previous research, we use the term "utilitarian" to refer to the functional, instrumental, and practical value of consumption offerings. Holbrook(1999) notes that consumer value is an experience that results from the consumption of such benefits. In the context of cell phones for example, the phone's battery life and sound volume are utilitarian benefits, whereas aesthetic appeal from its shape and color are hedonic benefits. Likewise, in the case of a car, fuel economics and safety are utilitarian benefits whereas the sunroof and the luxurious interior are hedonic benefits. The shopping goals are consisted of the promotion focus goal and the prevention focus goal, based on the self-regulatory focus theory. The promotion focus is characterized into focusing ideal self because they are oriented to wishes and vision. The promotion focused individuals are tend to be more risk taking. They are more sensitive to hope and achievement. On the contrary, the prevention focused individuals are characterized into focusing the responsibilities because they are oriented to safety. The prevention focused individuals are tend to be more risk avoiding. We wanted to test the relation among the shopping value, shopping goal and customer loyalty. Customers show the positive or negative feelings comparing with the expectation level which customers have at the point of the purchase. If the result were bigger than the expectation, customers may feel positive feeling such as delight or satisfaction and they would want to share their feelings with other people. And they want to buy those products again in the future time. There is converging evidence that the types of goals consumers expect to be fulfilled by the utilitarian dimension of a product are different from those they seek from the hedonic dimension (Chernev 2004). Specifically, whereas consumers expect the fulfillment of product prevention goals on the utilitarian dimension, they expect the fulfillment of promotion goals on the hedonic dimension (Chernev 2004; Chitturi, Raghunathan, and Majahan 2007; Higgins 1997, 2001) According to the regulatory focus theory, prevention goals are those that ought to be met. Fulfillment of prevention goals in the context of product consumption eliminates or significantly reduces the probability of a painful experience, thus making consumers experience emotions that result from fulfillment of prevention goals such as confidence and securities. On the contrary, fulfillment of promotion goals are those that a person aspires to meet, such as "looking cool" or "being sophisticated." Fulfillment of promotion goals in the context of product consumption significantly increases the probability of a pleasurable experience, thus enabling consumers to experience emotions that result from the fulfillment of promotion goals. The proposed conceptual framework captures that the relationships among hedonic versus utilitarian shopping values and promotion versus prevention shopping goals respectively. An analysis of the consequence of the fulfillment and frustration of utilitarian and hedonic value is theoretically worthwhile. It is also substantively relevant because it helps predict post-consumption behavior such as the promotion versus prevention shopping goals orientation. Because our primary goal is to understand how the post consumption feelings influence the variable customer loyalty: word of mouth (Jacoby and Chestnut 1978). This research result is that the utilitarian shopping value gives the positive influence to both of the promotion and prevention goal. However the influence to the prevention goal is stronger. On the contrary, hedonic shopping value gives influence to the promotion focus goal only. Additionally, both of the promotion and prevention goal show the positive relation with customer loyalty. However, the positive relation with promotion goal and customer loyalty is much stronger. The promotion focus goal gives the influence to the customer loyalty. On the contrary, the prevention focus goal relates at the low level of relation with customer loyalty than that of the promotion goal. It could be explained that it is apt to get framed the compliment of people into 'gain-non gain' situation. As the result, for those who have the promotion focus are motivated to deliver their own feeling to other people eagerly. Conversely the prevention focused individual are more sensitive to the 'loss-non loss' situation. The research result is consistent with pre-existent researches. There is a conceptual parallel between necessities-needs-utilitarian benefits and luxuries-wants-hedonic benefits (Chernev 2004; Chitturi, Raghunathan and Majaha 2007; Higginns 1997; Kivetz and Simonson 2002b). In addition, Maslow's hierarchy of needs and the precedence principle contends luxuries-wants-hedonic benefits higher than necessities-needs-utilitarian benefits. Chitturi, Raghunathan and Majaha (2007) show that consumers are focused more on the utilitarian benefits than on the hedonic benefits of a product until their minimum expectation of fulfilling prevention goals are met. Furthermore, a utilitarian benefit is a promise of a certain level of functionality by the manufacturer or the retailer. When the promise is not fulfilled, customers blame the retailer and/or the manufacturer. When negative feelings are attributable to an entity, customers feel angry. However in the case of hedonic benefit, the customer, not the manufacturer, determines at the time of purchase whether the product is stylish and attractive. Under such circumstances, customers are more likely to blame themselves than the manufacturer if their friends do not find the product stylish and attractive. Therefore, not meeting minimum utilitarian expectations of functionality generates a much more intense negative feelings, such as anger than a less intense feeling such as disappointment or dissatisfactions. The additional multi group analysis of this research shows the same result. Those who are unsatisfactory customers who have the prevention focused goal shows higher relation with WOM, comparing with satisfactory customers. The research findings in this article could have significant implication for the personal selling fields to increase the effectiveness and the efficiency of the sales such that they can develop the sales presentation strategy for the customers. For those who are the hedonic customers may be apt to show more interest to the promotion goal. Therefore it may work to strengthen the design, style or new technology of the products to the hedonic customers. On the contrary for the utilitarian customers, it may work to strengthen the price competitiveness. On the basis of the result from our studies, we demonstrated a correspondence among hedonic versus utilitarian and promotion versus prevention goal, WOM. Similarly, we also found evidence of the moderator effects of satisfaction after use, between the prevention goal and WOM. Even though the prevention goal has the low level of relation to WOM, those who are not satisfied show higher relation to WOM. The relation between the prevention goal and WOM is significantly different according to the satisfaction versus unsatisfaction. In addition, improving the promotion emotions of cheerfulness and excitement and the prevention emotion of confidence and security will further improve customer loyalty. A related potential further research could be to examine whether hedonic versus utilitarian, promotion versus prevention goals improve customer loyalty for services as well. Under the budget and time constraints, designers and managers are often compelling to choose among various attributes. If there is no budget or time constraints, perhaps the best solution is to maximize both hedonic and utilitarian dimension of benefits. However, they have to make trad-off process between various attributes. For the designers and managers have to keep in mind that without hedonic benefit satisfaction of the product it may hard to lead the customers to the customer loyalty.

  • PDF