• 대한치과보철학회지
• /
• 제18권1호
• /
• pp.15-35
• /
• 1980

The purpose of this study was to investigate stresses in the various components of fixed partial dentures restoring the posterior teeth of the lower jaw, and to measure quantitatively the effects of certain modifications in structural design on the stresses in the restorations using two-dimensional photoelasticity. Two-dimensional photoelastic methods were used in this study. Several models of fixed partial dentures were constructed. Shoulder less margins and anatomic occlusal reduction were incorporated in Model 1. Rounded shoulders and flat occlusal reduction were incorporated in Model 2, while Model 3 was a cantilever fixed partial denture. Other similar fixed partial dentures were constructed with V and U notches deliverately included in the region of the fixed joints for comparative reasons. The birefringent materials used in this study were PSM-1 and PSM-5 in standard sheets. PSM-1 was used for constructing the substructure, and PSM-5 was used in making the components of the fixed partial dentures. The two materials were used in the construction of composite photoelastic models. Improved artificial stone was used to represent dental cement in luting the composite photoelastic models. Static loading procedures were used at preplanned sites to represent occlusal loads in the mouth. 35 mm color and B/W film were used to record isochromatics in accordance with photoelastic procedures. Data reduction was performed using the grid method, which helped in, the mathematical integration procedure (Shear difference method) to separate the principal stresses. The results were as follows. 1. Fixed partial dentures do not function in bending as a symmetrical beam. Alternate areas of tension and compression were demonstrated when multiple contact loading was used. 2. The weakest part in posterior fixed partial dentures is the fixed joint. 3. (1) Models I and modified Model I were loaded on the pontic using a 50 pound vertical static load. The shear stress near the posterior fixed joint in Model 1 (U notches) was+129.4 p.s.i., and at the same fixed joint in modified Model 1 (V notches) was+239.4 p.s.i. The concentration of stress in fixed joint was reduced by 50% when U notches replaced the V notches. (2) Modified Model 2 was loaded using a multiple contact loader at a total load of 125 pounds. The difference between the principal stresses (${\sigma}_1-{\sigma}_2$), shear stress, at the V notches was+600 p.s.i., and at the U notches was+3l7 p.s.i. The shear stress was reduced by 50% when U notches replaced the V notches. V-grooves at the fixed joints should be avoided, and should be replaced by regular shaped U-grooves. 4. Cantilever fixed partial dentures had much higher stresses at the fixed joint than fixed partial dentures that were attached at both ends.

• 자원환경지질
• /
• 제31권2호
• /
• pp.101-110
• /
• 1998

The purpose of this study is to elucidate the source of U anormaly formed in stream water of the drainage system around the Shinbo talc mine area based on the hydrochemical properties of water masses including surface water and groundwater. The hydrochemical properties of water masses in the Shinbo talc mine area are divide into three types; Type I : $Ca(Mg)SO_4$ type with high U content as shown in the stream water flowout from the mine, Type II : $Ca(HCO_3)_2$ type with high U content as in deep groundwater, Type III : $Ca(HCO_3)_2$, type with low U content as in the other stream water and shallow groundwater. It is necessary to emphasize that in deducing the uranium source, a distinct discrimination between type I and type II is showed in their hydrothermal properties in spite of commonly having a high uranium content, which in turn means the occurrence of a different water-rock interaction processes between both type. All evidences suggest that type II groundwater have acted as a primary media in the transport of uranium and that, as the groundwater flows through the talc mineralization zone, water composition of type II was transformed into that of type I water as the results of a secondary water rock interaction process, caused by imposition of new mineralogically controlled thermodynamic constraints. Consequently, in the viewpoint of hydrochemical exploration, the investigation of the hydrologic circulation system and the hydrogeologic properties for the aquifer of type II groundwater shall be done first of all and will provide a crucial clue on tracing the uranium mineralization zone occurred in the Shinbo talc mine area.

• 한국시뮬레이션학회논문지
• /
• 제19권1호
• /
• pp.91-101
• /
• 2010

전투관리언어인 BML은 미군에서 가상 부대 및 실제 부대를 지휘 및 통제하기 제공하기 위한 명확한 언어라고 정의할 수 있다. BML은 C2 체계와 M&S를 연결하기 위해 미국과 NATO에서 개발되었다. BML이 개발된 목적은 전장정보를 통해 상황인식을 제공하고, C2 체계와 M&S간 상호운용을 위한 해법을 제시하는 것이라고 할 수 있다. 본 연구는 육군에서 시작하여 다국적국으로 구성된 환경으로 확장되고 있는 미국의 BML 개발과정에 대해서 설명하고, 한국군에서 C4I체계와 M&S간 상호운용을 위한 BML 적용 방안에 대해서 제안한다. 최근, 미국에서는 BML을 연합국으로 구성된 환경에서 적용하여 긍정적인 결과를 얻었는데, 이는 C2 체계와 M&S간 상호운용에 대한 가능성을 보여주었다. 마지막으로, 본 연구는 BML을 한국군에 적용하기 위한 방안으로 한국군 합동지휘통제체계를 중심으로 제안하였다. 이는 향후 한국군에서 BML 적용시 밑그림을 제공 할 것이라고 판단된다.

• 인터넷정보학회논문지
• /
• 제11권1호
• /
• pp.71-76
• /
• 2010

본 연구는 U-러닝 시스템에서 SCORM을 적용하기 위한 방안을 제시하고자 한다. 이는 기존의 SCORM기반의 학습객체 인터페이스 환경인 RTE의 API Instance와 U-러닝을 연결하기 위해 API 브로커를 제시하였다. API 브로커에서는 요구포트와 응답포트를 통해 SCORM과 U-러닝 서버사이의 서비스를 핸들링한다. 또한 각 서비스들의 원활한 운용을 위하여 API 브로커 내에 학습 콘텐츠 서비스 버퍼를 두었다.

• Journal of Microbiology and Biotechnology
• /
• 제15권5호
• /
• pp.1125-1129
• /
• 2005

Cloning of a 6.6-kb BamHI digested chromosomal DNA from S. griseus IFO13350 revealed the presence of an additional gene encoding a novel trypsin-like enzyme, named SprU. The SprU protein shows a high homology ($79\%$ identity, $88\%$ similarity) with the SGT protease, which has been reported as a bacterial trypsin in the same strain. The amino acid sequence deduced from the nucleotide sequence of the sprU gene suggests that SprU is produced as a precursor consisting of an amino-terminal presequence (29 amino acid residues), prosequence (4 residues), and mature trypsin consisting of 222 amino acids with a molecular weight of 22.94 kDa and a calculated pI of 4.13. The serine, histidine, and aspartic acid residues composing the catalytic triad of typical serine proteases are also well conserved. When the trypsin activity of the SprU was spectrophotometrically measured by the enzymatic hydrolysis of the artificial chromogenic substrate, N-${alpha}$-benzoyl-DL-arginine-p-nitroanilide, the S. lividans transformant with pWHM3-U gave 3 times higher activity than that of control. When the same recombinant plasmid was introduced into S. griseus, however, the gene dosage effect was not so significant, as in the cases of other genes encoding serine proteases, such as sprA, sprB, and sprD. Although two trypsins, SprU and SGT, have a high degree of homology, the pI values, the gene dosage effect in S. griseus, and the gene arrangement adjacent to the two genes are very different, suggesting that the biochemical and biological function of the SprU might be quite different from that of the SGT.

• Journal of Nuclear Fuel Cycle and Waste Technology
• /
• 제1권1호
• /
• pp.65-73
• /
• 2013

Temperature-dependent hydrolysis behaviors of aqueous U(VI) species were investigated with time-resolved laser fluorescence spectroscopy (TRLFS) in the temperature range from 15 to $75^{\circ}C$. The formation of four different U(VI) hydrolysis species was measured at pHs from 1 to 7. The predominant presence of $UO{_2}^{2+}$, $(UO_2)_2(OH){_2}^{2+}$, $(UO_2)_3(OH){_5}^+$, and $(UO_2)_3(OH){_7}^-$ species were identified based on the spectroscopic properties such as fluorescence wavelengths and fluorescence lifetimes. With an increasing temperature, a remarkable decrement in the fluorescence lifetime for all U(VI) hydrolysis species was observed, representing the dynamic quenching behavior. Furthermore, the increase in the fluorescence intensity of the further hydrolyzed U(VI) species was clearly observed at an elevated temperature, showing stronger hydrolysis reactions with increasing temperatures. The formation constants of the U(VI) hydrolysis species were calculated to be $log\;K{^0}_{2,2}=-4.0{\pm}0.6$ for $(UO_2)_2(OH){_2}^{2+}$, $log\;K{^0}_{3,5}=-15.0{\pm}0.3$ for $(UO_2)_3(OH){_5}^+$, and $log\;K{^0}_{3,7}=-27.7{\pm}0.7$ for $(UO_2)_3(OH){_7}^-$ at $25^{\circ}C$ and I = 0 M. The specific ion interaction theory (SIT) was applied for the extrapolation of the formation constants to infinitely diluted solution. The results of temperature-dependent hydrolysis behavior in terms of the U(VI) fluorescence were compared and validated with those obtained using computational methods (DQUANT and constant enthalpy equation). Both results matched well with each other. The reaction enthalpies and entropies that are vital for the computational methods were determined by a combination of the van't Hoff equation and the Gibbs free energy equation. The temperature-dependent hydrolysis reaction of the U(VI) species indicates the transition of a major U(VI) species by means of geothermal gradient and decay heat from the radioactive isotopes, representing the necessity of deeper consideration in the safety assessment of geologic repository.

• 한국광학회지
• /
• 제17권1호
• /
• pp.60-67
• /
• 2006

본 논문에서는 I자형과 U자형의 변압기를 각각 사용한 펄스형 고전압 전원에 의해 대기압에서 동작되는 파장 337.1 nm인 질소레이 저의 방전간극과 레이저 관에 각각 광섬유를 설치하고, 이를 통해 나오는 빛을 핀 다이오드를 이용하여 선전리 현상을 직접 관측하고 출력특성을 조사하였다. 레이저 출력이 안정되고 높아질수록 선전리 현상을 뚜렷이 관측할 수 있었고, 레이저 출력은 I자형 변압기보다는 U자형의 변압기를 사용하였을 때 높은 출력과 안정성을 얻었으며, 또한 펄스 방전의 예비동작 시간도 U자형이 1/3 정도 짧았다. U자형의 변압기를 사용하고 출력창의 반사율 $40\%$, 반복율 10 Hz, 레이저 관내에서 질소기체의 유동률이 4 ${\iota}$/min, 방전간극 내에서 질소기체의 유동율이 1500 cc/min, 방전간극 전극 거리 3.0 mm, 레이저 관 내 전극거리 5.0 mm 일 때, 안정성이 $2.7\%$인 $36{\mu}J$의 출력을 얻었다.

• 한국국방경영분석학회지
• /
• 제5권1호
• /
• pp.123-135
• /
• 1979

Weapon System effectiveness indices are a key factor to the cost-effectiveness analysis in the process of allocating national resources in an optimal fashion. First part of this paper reviews the need of weapon -effectiveness indices, historical development of methodologies on military strength evaluation with various models of indices, and the interrelation-ship between weapon effectiveness indices and war-game. Second part of this paper analyzes the concepts and usage of the already developed methodologies, i .e., index of power, weapon lethality index (W.L.I.), index of fire power potential (I.F.P), fire power potential (F. P. P), and weapon effectiveness indices/weighted unit value (W. E. I/W. U. V.). Finally, weaknesses and limits of these methodologies are compared and evaluated. Result of this research shows that the W. L. I, I. F. P, and F. P. P seem to possess many non-scientific or ambiguous facets, but the W. E. I/W. U. V method produces more detailed, inclusive, and reasonable indices. The paper concludes with the emphasis on the importance of the provision of the theoretical bases to develop effectiveness indices which can be used to evaluate Korean weapon systems, and the early establishment of a specialized research group to manage and develop methodologies on the weapon effectiveness indices.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제19권3호
• /
• pp.47-55
• /
• 2014

Arthrobacter chlorophenolicus A6 possesses several monooxygenases (CphC-I, CphC-II, and CphB) that can catalyze the transformation of 4-chlorophenol (4-CP) to hydroxylated intermediates in the initial steps of substrate metabolism. The corresponding genes of the monooxygenases were cloned, and the competent cells were transformed with these recombinant plasmids. Although CphC-II and CphB were expressed as insoluble forms, CphC-I was successfully expressed as a soluble form and isolated by purification. The specific activity of the purified CphC-I was analyzed by using 4-CP, 4-chlorocatechol (4-CC), and catechol (CAT) as substrates. The specific activities for 4-CP, 4-CC, and CAT were determined to be 0.312 U/mg, 0.462 U/mg, 0.246 U/mg, respectively. The results of this study indicated that CphC-I is able to catalyze the degradation of 4-CC and CAT in addition to 4-CP, which is a primary substrate. This research is expected to provide the fundamental information for the development of an eco-friendly biochemical degradation of aromatic hydrocarbons.

• 한국토양비료학회지
• /
• 제45권4호
• /
• pp.524-531
• /
• 2012

본 연구는 양돈슬러리의 혐기소화 효율 증진을 위하여 양돈슬러리를 고액분리 하고 이때 발생하는 슬러지케이크를 200, 220, 250, $270^{\circ}C$에서 각각 열가수분해 전처리하여 열가수분해 온도별 유기물의 가용화 효율과 혐기적 메탄생산 퍼텐셜을 분석하였다. 최종메탄생산퍼텐셜 ($B_u$)은 서로 다른 S/I 비율 (1:9, 3:7, 5:5, 7:3의 부피비)에서 73일간 혐기배양하여 구하였다. 양돈슬러리의 유기물 가용화율 ($S_{COD}$)은 $200{\sim}270^{\circ}C$ 열가수분해 반응에서 98.4~98.9%를 보였으며, 열가수분해액의 이론적 메탄생산퍼텐셜 ($B_{th}$)은 반응온도의 증가와 함께 증가하여 $200^{\circ}C$, $220^{\circ}C$, $250^{\circ}C$, $270^{\circ}C$에서 각각 0.631, 0.634, 0.705, $0.748Nm^3\;kg^{-1}-VS_{added}$로 나타났다. 열가수분해액의 최종메탄생산퍼텐셜 ($B_u$)은 $200^{\circ}C$의 열가수분해액에서 S/I 비율이 1:9에서 7:3으로 증가할수록 $0.197Nm^3\;kg^{-1}-VS_{added}$에서 $0.111Nm^3\;kg^{-1}-VS_{added}$로 감소하는 경향이 나타났으며, 다른 열가수분해 반응 온도 ($220^{\circ}C$, $250^{\circ}C$, $270^{\circ}C$)에서도 $200^{\circ}C$의 열가수분해액과 동일한 경향의 최종메탄생산퍼텐셜을 나타내었다. 유기물의 혐기적 분해율 ($B_u/B_{th}$)을 보면, $200^{\circ}C$ 열가수분해액은 S/I비율이 증가함에 따라 31.2%에서 17.6%까지 감소하였으며, $220^{\circ}C$, $250^{\circ}C$, $270^{\circ}C$의 열가수분해액에서 각각 36.4%에서 9.6%, 31.3%에서 0.8%, 26.6%에서 0.8%로 감소하는 것으로 나타나, 열가수분해 온도의 상승에 따라 유기물의 혐기적 분해능이 낮아졌다. 이러한 결과는 98% 대의 유기물 가용화율 ($S_{COD}$)을 보인 것과는 반대로 $250{\sim}270^{\circ}C$의 열가수분해액은 혐기소화에 분해저항성을 지니는 것으로 나타났다.