• 공업화학
• /
• 제20권3호
• /
• pp.322-328
• /
• 2009

Octamethylcyclotetrasiloxane (OMCTS)을 에멀젼 상태에서 초음파를 조사하여 polydimethylsiloxane (PDMS)을 중합하였다. 중합에 활용된 초음파 반응기는 주파수가 20 KHz의 horn 유형과 40 KHz의 bath 유형이었으며, horn과 bath를 혼용한 경우의 중합 공정의 특성도 평가해 보았다. 고려된 주요 변수들은 반응 온도와 초음파 조사 시간 이었으며, 중합물에 대하여 각 시료의 고유 점도와 전환율 측정을 통하여 각 중합공정의 효율성과 특성을 조사하고, 최적의 공정 조건을 도출해 보고자 하였다. Horn 유형의 반응기에서는 수 분 이내에 80% 이상의 전환율이 달성되고 높은 점도의 PDMS를 얻을 수 있었으나, 조사 시간에 따라 전환율과 점도는 최대값을 보인 이후에 감소하는 경향을 나타내었다. 초음파의 강도가 상대적으로 약하게 유지되는 bath 유형의 반응기에서는 1 h 이상의 조사가 필요하였으며, horn 유형과 달리 전환율과 점도가 조사 시간에 따라 지속적으로 증가하는 경향이 지배적이었다. Horn유형과 bath유형을 조합한 혼합형 반응기에서는 다른 반응기와는 매우 다른 결과들이 나타났으며, 각 반응기의 특성은 전산 모사를 이용한 반응기 내의 음파 해석을 바탕으로 설명되었다.

• 한국수소및신에너지학회논문집
• /
• 제24권2호
• /
• pp.150-159
• /
• 2013

To enhance the performance of SEWGS system by holding the WGS catalyst in a SEWGS reactor using bed inserts, effects of insert geometry and shape of WGS catalysts on CO conversion were measured and investigated. Small scale fluidized bed reactor was used as experimental apparatus and WGS catalyst (particle and tablet) and sand were used as bed materials. The parallel wall type and cross type bed inserts were used to hold the WGS catalysts. The CO conversion with steam/CO ratio was determined based on the exit gas analysis. The measured CO conversion using the bed inserts showed high value comparable to physical mixing cases. Moreover, gas flow direction was confirmed by bed pressure drop measurement for each case. Most of input gas flowed through the catalyst side when we charged tablet type catalyst into the bed insert and this can cause low $CO_2$ capture efficiency because the possibility of contact between input gas and $CO_2$ absorbent is low in this case. New bed insert geometry was proposed based on the results from this study to enhance contact between input gas and WGS catalyst and $CO_2$ absorbent.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.189-192
• /
• 1998

In this paper, we analyzed Microwave-DC conversion efficiency for the rectennas and it's position change. Rectenna consist of a two major parts, receiveing antenna and rectifying circuits. We made two types of 2.45C rectennas which the dipole and the patch antenna. Rectifying circuit is a GaAs-schottky diode with a large forward current and reverse breakdown voltage. The results of RF-DC conversion efficiency for two rectennas, patch type has 75.6% efficiency with 400$\Omega$ load resistor and dipole type has 69.75% efficiency with 360$\Omega$ load resistor. When the rectennas has optimal load resistor, Rectenna efficiency shows of $\pm10%$ at $70^{\circ}$~$110^{\circ}$ position.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집 특별세미나,특별/일반세션
• /
• pp.249-256
• /
• 2009

The cooling technology of power conversion semiconductors in the propulsion system for the HEMU(High Electrical Multi Unit) are applied in water cooling method and phase change method such as the immersed type and the heat pipe type. This research designs and manufactures the water cooling system that could cool about heat load Q=2kW and performance tests to apply it by an electric power conversion semiconductors(IGBT) cooling technology. Experimental condition made change of a flow rate, an air velocity and a heat load to confirm operation characteristics of water cooling device, and when is heat load 2kW, air velocity 20 m/s, and water flow rate 7kg/s, it is about $80^{\circ}C$ to temperature of cooling plate.

• 대한전자공학회논문지SP
• /
• 제47권1호
• /
• pp.159-168
• /
• 2010

전력 분석 공격의 다양한 대응법들 중 대칭키 암호의 경우, 암/복호화, 키 스케쥴링의 연산 도중 중간 값이 전력 측정에 의해 드러나지 않도록 하는 마스킹 기법이 잘 알려져 있다. 대칭키 암호는 Boolean 연산과 Arithmetic연산이 섞여 있으므로 마스킹 형태 변환이 불가피하다. Messerges에 의해서 일반적인 전력 분석 공격에 안전한 마스킹 형태 변환 알고리즘이 제안되었고 이에 대한 취약성이 보고되었다. 본 논문에서는 Messerges가 제안한 마스킹 형태 변환 알고리즘에 대한 기존 전력 분석 공격이 불가능함을 보이고 새로운 전력 분석 공격 방법을 제안한다. 마스킹 형태 변환 알고리즘에 대하여 강화된 DPA와 CPA 공격 방법을 제시한 뒤 시뮬레이션 결과로써 제안하는 공격 방법으로 실제 분석이 가능함을 확인한다.

• Nuclear Engineering and Technology
• /
• 제42권1호
• /
• pp.89-96
• /
• 2010

This paper describes the methodology of calculating the internal dose conversion coefficient in order to assess the radiological impact on non-human species. This paper also presents the internal dose conversion coefficients of 25 radionuclides ($^3H,\;^7Be,\;^{14}C,\;^{40}K,\;^{51}Cr,\;^{54}Mn,\;^{59}Fe,\;^{58}Co,\;^{60}Co,\;^{65}Zn,\;^{90}Sr,\;^{95}Nb,\;^{99}Tc,\;^{106}Ru,\;^{129}I,\;^{131}I,\;^{136}Cs,\;^{137}Cs,\;^{140}Ba,\;^{140}La,\;^{144}Ce,\;^{238}U,\;^{239}Pu,\;^{240}Pu$) for domestic seven reference animals (roe deer, rat, frog, snake, Chinese minnow, bee, and earthworm) and one reference plant (pine tree). The uniform isotropic model was applied in order to calculate the internal dose conversion coefficients. The calculated internal dose conversion coefficient (${\mu}Gyd^{-1}$ per $Bqkg^{-1}$) ranged from $10^{-6}$ to $10^{-2}$ according to the type of radionuclides and organisms studied. It turns out that the internal does conversion coefficient was higher for alpha radionuclides, such as $^{238}U,\;^{239}Pu$, and $^{240}Pu$, and for large organisms, such as roe deer and pine tree. The internal dose conversion coefficients of $^{239}U,\;^{240}Pu,\;^{238}U,\;^{14}C,\;^3H$, and $^{99}Tc$ were independent of the organism.

• Journal of Power Electronics
• /
• 제12권2호
• /
• pp.317-325
• /
• 2012

Resonant immittance converter (RIC) topologies can transform a current source into a voltage source (Type-I RICs) and vice versa (Type-II RICs), thereby making them suitable for many power electronics applications. RICs are operated at a fixed frequency where the resonant immittance network (RIN) exhibits immittance conversion characteristics. It is observed that the low-frequency response of Type-II RINs is relatively flat and that the state variables associated with Type-II RINs affect the response only at the high frequencies in the vicinity of the switching frequency. The overall response of a Type-II RIC is thus dominated by the filter response, which is particularly important for the controller design. Therefore, an approximate equivalent circuit model and a small-signal model of Type-II RICs are proposed in this paper, neglecting the high-frequency response of Type-II RINs. While the proposed models greatly simplify and speed-up the analysis, it adequately predicts the open-loop transient and small-signal ac behavior of Type-II RICs. The validity of the proposed models is confirmed by comparisons of their results with those obtained from a cycle-by-cycle simulation and with an experimental prototype.

• 한국환경복원기술학회지
• /
• 제19권6호
• /
• pp.101-110
• /
• 2016

Development activities in forest areas are analysed based on degree of slope, altitude, land cover, and prefectures in order to improve the capacity of existing regulations of 'feasibility of forest land conversion' and 'assessment of forest land characteristics' in this research. 959 land based developments between year 2007 and 2013 have been analysed. A development site includes over 50% of forest is categorized as a forest type, degree of slope is steeper than $8.5^{\circ}$ as mountain type, and a development included in the both categories as combined type. Distribution characteristics of the above three types are analysed by development categories and regions adopting Relative Mountain Development Index(RMDI). In results, 44.94% of total development activities have been carried out in Gyeongsang Do in order of urban development, industrial complex, sports facilities, and soil and stone collection quarrying. Developments less than $0.3km^2$ which are exempt from the feasibility of forest land conversion regulation consist 86 cases of forest type, 78 cases in mountain type, and 78 cases in combined type. SAI by slope range showed the highest value of 1.55 in less than $5^{\circ}$ and the lowest value of 0.69 between $20^{\circ}-25^{\circ}$. RMDI value in Gyeongsang Do where mountain ratio is 67.05% appeared 1.17, which is 5 times more than Gangwon Do where mountain area ratio is 81.30%, and 2 times more than Chungchung Do where mountain area ratio is 51.24%. Development activities in forestland in Korea showed unequal distributions and 26% of those developments were not subjected to the feasibility of forest land conversion regulation.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.67-67
• /
• 2011

Compound semiconductor/CNTs composites have shown considerably improved efficiency improvement in photovoltaic devices, which is often attributed to two different factors. One is the formation of efficient electronic energy cascade structures. The other effect of CNTs on the performance of photovoltaic devices is the decrement of interfacial resistance. The interfacial resistances at n-type/ p-type materials and/or n-type materials/TCO electrode are reduced by an outstanding electrical property of CNTs. In addition to the effects of CNTs, we report the third reason for increment of efficiency in photovoltaic devices by CNT's well-known electrical field enhancement effects. The improved ${\beta}$ values in reverse-FE currents of CIGS electrode with SWNTs layers indicate the enhancement of electrical field in photovoltaic devices, which implies the acceleration of the electron transfer rate in the cell. Due to the formation of an efficient electronic energy cascade structure and the decrease of the interfacial resistance as well as the improvement of the electrical field in the photovoltaic devices, the power conversion efficiency of electrochemically deposited superstrate-type CIGS solar cells was increased 24.3% in the presence of SWNTs and showed 10.40% conversion efficiency.

• 한국광학회지
• /
• 제9권5호
• /
• pp.282-290
• /
• 1998

등가렌즈 변환법을 2매 접합렌즈계의 설계에 적용하여 achromatic doublet 과 aplanatic doublet을 설계하였다. 먼저 얇은 렌즈계에서 3차수차를 보정하고, 이를 등가렌즈 변환법을 사용하여 두꺼운 렌즈계로 변환하였다. Crown 유리 BaK-2와 flint 유리 SF-2를 사용하여 Fraunhofer type 과 Steinheil type의 접합렌즈계를 설계하였고, 얇은 2매 접합렌즈계에서는 두 가지 설계형태 모두에서 2개의 achromatic solution과 하나의 aplanatic solution이 존재하였다.