• Korea-Australia Rheology Journal
• /
• 제11권4호
• /
• pp.305-311
• /
• 1999

The shear behavior of polymers obtained by means of devices such as capillary and cone-and-plate rheo-meters is commonly used to assess their processing performance and as a characterization tool. However, the number of instances when two polymers have the same shear properties but perform differently during certain types of processing operations (e.g. film blowing and sheet extrusion) indicate that shear properties alone may not be sufficient to characterize polymeric fluids. We begin by defining the kinematics of shear-free or extensional flow and the associated material functions. The extensional and shear behavior of three different types of polyethylene (PE) are then compared to illustrate the points that one cannot ascertain the extensional properties of polymer melts from their shear properties and, furthermore, there may not be a simple relation between properties obtained from one type of extensional flow and those of another type. The kinematics of most processing flows are extensional rather than shear in nature, and , hence, the performance of polymers during processes such as fiber spinning, film casting, film blowing, thermoforming, blow molding, and even extrusion is more readily accounted for through extensional viscosity measurements. Methods for carrying out extensional flow measurements are then reviewed including approximate methods. To illustrate the sensitivity of extensional viscosity measurements to subtle changes in the molecular architecture of PEs, results are presented for samples with a narrow molecular weight distribution but with varying numbers of long chain branches. Finally, constitutive equations which allow one to separate shear and extensional flow behavior are discussed as any attempts to simulate the subtle processing differences between two polymers will require constitutive equations of this nature.

• Journal of Ginseng Research
• /
• 제20권3호
• /
• pp.269-273
• /
• 1996

We investigated the effects of ginseng glycosides and their aglycones on processes of single ion channel formation and channel properties. The glycosides, Rg, and Rb, , and their aglycones, 20-(S)-protopanaxatriol (PT) and 20-(S)-protopanaxadiol (PD) increased the membrane permeability for ions. PT, PD, Rg1, and Rb1; at concentrations of 0.5, 3.0, 10.0 and 30.0 $\mu\textrm{g}$/ml respectively; Induced single ion channel fluctuations with the life times in the range of 0.1~1005 in open states and conductances from 5 to 30 pS in 1 M KCI. At high concentrations of these substances, rapid fluctuations of transmembrane ion current with amplitude from hundred pS to dozen nS were observed. Against other substances, ginsenoside Rbl began to increase the membrane conductance at concentration of about 60 $\mu\textrm{g}$/ml without fluctuation of single ion channel. Membranes treated with PT, PD, Rg1 and Rb1 are more permeable to K+, than to Cl while zero current membrane potentials with 10 gradients of KCI were 12, 16, 8, 25 mV respectively. Key words : Membrane conductance, single ion channel, ginsenosides.

• Laboraroty Animal Research
• /
• 제34권4호
• /
• pp.140-146
• /
• 2018

Though bile acids have been well known as digestive juice, recent studies have demonstrated that bile acids bind to their endogenous receptors, including Farnesoid X receptor (FXR) and G protein-coupled bile acid receptor 1 (GPBAR1; TGR5) and serve as hormone to control various biological processes, including cholesterol/bile acid metabolism, glucose/lipid metabolism, immune responses, and energy metabolism. Deficiency of those bile acid receptors has been reported to induce diverse metabolic syndromes such as obesity, hyperlipidemia, hyperglycemia, and insulin resistance. As consistent, numerous studies have reported alteration of bile acid signaling pathways in type II diabetes patients. Interestingly, bile acids have shown to activate TGR5 in intestinal L cells and enhance secretion of glucagon-like peptide 1 (GLP-1) to potentiate insulin secretion in response to glucose. Moreover, FXR has been shown to crosstalk with TGR5 to control GLP-1 secretion. Altogether, bile acid receptors, FXR and TGR5 are potent therapeutic targets for the treatment of metabolic diseases, including type II diabetes.

• 한국수산과학회지
• /
• 제30권3호
• /
• pp.442-450
• /
• 1997

본 연구는 부경대학교 해양탐사선인 탐양호를 이용하여 1995년 2월 14일에서 17일까지 실시하였다 수온, 염분 및 용존산소를 이용한 T-S diagram 및 $T-O_2$ diagram 으로부터 수괴는 5개의 Type으로 구분되었다. 특히 T-S diagram에서는 잘 구분되지 않았던 Type IV와 Type V는 $T-O_2$ diagram에서 뚜렷이 구분되었다. 하지만 기존 수괴와 명확히 일치하지 않는 것은 본 조사가 동계에 실시되어 표층수온의 감소로 인하여 수괴의 수직혼합이 강하게 일어나서 생긴 현상으로 사료된다. 영양염류의 수괴별 농도분포를 보면, Type I, Type II, Type III은 서로 거의 비슷한 농도를 보였지만 Type IV에서 Type V로 갈수록 증가되었다. 그리고 동일 수괴에서 농도범위가 넓게 나왔는데, 이는 수온약층의 약화로 인하여 발생한 것으로 생각된다. N/P ratio은 모든 water type에서 Redfield ratio 이하로 나타났는데, 이것은 질산염이 식물플랑크톤 성장의 제한인자로 작용하고 있음을 보여주고 있다. chlorophyll $\alpha$의 농도는 $0\~8\;{\mu}g/\ell$의 범위로, Type I에서 최대였고 Type IV와 Type V에서는 거의 검출되지 않았다. 입자성 유기탄소와 유기질소의 농도는 각각 $0.49\~20.03\;{\mu}g-at/\ell$와 $0.09\~5.34\;{\mu}g-at/\ell$ 범위로서, 수심의 증가에 따라 그 농도가 감소하고, 연안에서 외양쪽으로 갈수록 낮아지는 경향이었다. Water type별 농도는 Type I > Type II > Type III > Type IV > Type V의 순서로 수심의 증가에 따라 농도가 증가하는 경향이었다. 즉 이들 입자성 유기물질은 수괴별로 어떤 뚜렷한 경향을 보이지는 않았으며, 수심에 따라서 농도가 변화되는 것으로 생각된다. POC/PON의 원자비는 3.23으로 Redfield ratio 이하로 나타났다. 이것은 POC보다 PON이 더 난분해성이라 침강하는 동안 POC는 분해되지만 수직혼합에 의해 PON은 다시 재부유하기 때문인 것으로 사료된다. POC/chlorophyll $\alpha$의 평균값은 1962로 매우 높은 값을 나타내었으며, non-living detritus가 POC의 대부분을 차지하고 있는 것으로 판단된다.

• 대한화학회지
• /
• 제29권4호
• /
• pp.356-364
• /
• 1985

이소부틸렌 2가 음이온 및 디리티오이소보틸렌 이성질체들에 대하여 STO-3G최적화 계산을 수행하여 이들 화학종의 기하구조, 에너지, Mulliken 점유도등을 고찰하였다. 이들 화학종의 생성과 관련되는 몇 가지 isodesmic반응의 반응에너지 및 그로부터 추정된 상대적 생성에너지로부터 Y-형 2가 음이온에 대한 "Y-방향족성"의 기여와 이들 2가 음이온 유사체를 거치는 알킬화 반응을 좌우하는 구조적 요인을 고찰하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.183-186
• /
• 2003

A finite element-based, integrated process model is presented for a three dimensional, coupled analysis of the thermal and mechanical behavior of type 304 stainless slab during hot charge rolling (HCR) and cold charge rolling (CCR) processes. The validity of the proposed model is examined through comparison with measurements. The susceptibility on micro-crack initiation or propagation due to the thermal stress in these two different process conditions was examined. The model's capability of revealing the effect of diverse process parameters is demonstrated through a series of process simulation.

• 한국식품조리과학회지
• /
• 제32권4호
• /
• pp.433-440
• /
• 2016

Purpose: To provide the nutritional information of sweet peppers, we have evaluated changes of nutrient content and retention rates by different sweet pepper types and blanching method. Methods: Four types of raw and blanched ($100^{\circ}C$, 30 sec) sweet peppers were prepared and their weight, nutrient content (3 water soluble vitamins, 10 minerals) and retention rates were analyzed. Results: The weight of blanched sweet peppers was decreased than that of raw sweet peppers. From the results of the two-way analysis, the type of sweet pepper had a greater influence than blanching method used on the thiamine, riboflavin, folate and vitamin C contents (but not niacin) (p<0.05). Red pimento contained the most thiamine (0.1 mg/100 g), riboflavin (0.16 mg/100 g), folate ($47.89{\mu}g/100g$) and total niacin (0.11 mg/100 g). Red paprika contained high levels of riboflavin (0.15 mg/100 g) and folate ($44.96{\mu}g/100g$). Orange paprika contained the highest vitamin C content (116.29 mg/100 g). In addition, the mineral content, with the exception of Se, was strongly influenced by the type of sweet pepper rather than the blanching method (p<0.001). The K content of sweet peppers was higher than other minerals. Overall, after blanching, high retention rates (over 70%) were observed in all types of sweet peppers. However, the retention rates of thiamin, vitamin C and Se showed lower levels (less than 70%). Conclusion: The vitamin and mineral contents depends more on the type of sweet pepper; although vitamin and mineral (except Se) contents showed some changes after blanching. Our results can be utilized to determine the effects of cooking processes on nutritional information.

• 경영정보학연구
• /
• 제10권2호
• /
• pp.269-289
• /
• 2008

전자정부 정보화 사업과 같은 규모와 그 범위가 거대하며, 한번에 모든 기존의 오프라인 프로세스가 온라인화 되지 않고 수년간에 걸쳐 그 효과가 나타나는 시스템의 파급효과에 대한 예측은 무척 난해한 문제이다. 이러한 e-transformation이 이루어지는 경우에는 지속적으로 모델의 수정 및 보완작업이 함께 이루어져야 한다. 이에 본 연구에서는 전자정부 정보화사업 중 하나인 G2B 시스템의 효과평가를 위해 EEM (E-transformation Evaluation Model)으로 명명한 새로운 모델과 평가방법론을 제시하고자한다. EEM 모델은 G2B 시스템으로 인해 e-transformation화된 업무프로세스 영역(온라인 영역)의 효과를 화폐가치로 산출하는 정량평가 모델이다. 또한 아직 G2B 시스템이 적응되지 않은 업무프로세스 영역(오프라인 영역)을 정보화시켰을 때 예상되는 효과를 함께 추정할 수 있도록 해준다. EEM 모델에서는 기준모델, 검증모델, 예측모델을 설정하고, 평가년도, 측정영역, 데이터종류에 따라 설문데이터와 DB 데이터를 함께 활용하여 모델을 검증하며 효과를 예측한다. 본 연구에서는 온라인과 오프라인 효과를 효과적으로 평가하기 위해 5단계와 10개의 세부절차로 구성된 EEM평가방법론을 제시하였다. 또한 제시된 방법론을 활용하여 대한민국 전자조달 G2B 시스템에 대해서 평가분석을 실시하였다. 본 연구에서 제시된 EEM 모델과 평가방볍론은 평가대상에 따라 다각적인 적응이 가능하므로 향후 전자정부 정보화사업의 효과평가와 정책수립에 도움이 될 것으로 기대된다. 뿐만 아니라 민간기업의 대형시스템 도입 효과평가에도 도움이 될 것으로 사료된다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.347-349
• /
• 2014

Model verification and validation (V&V) is a current research topic to build computational models with high predictive capability by addressing the general concepts, processes and statistical techniques. The hypothesis test for validity check is one of the model validation techniques and gives a guideline to evaluate the validity of a computational model when limited experimental data only exist due to restricted test resources (e.g., time and budget). The hypothesis test for validity check mainly employ Type I error, the risk of rejecting the valid computational model, for the validity evaluation since quantification of Type II error is not feasible for model validation. However, Type II error, the risk of accepting invalid computational model, should be importantly considered for an engineered products having high risk on predicted results. This paper proposes a technique named as the response-adaptive experimental design to reduce Type II error by adaptively designing experimental conditions for the validation experiment. A tire tread block problem and a numerical example are employed to show the effectiveness of the response-adaptive experimental design for the validity evaluation.

• 한국물환경학회지
• /
• 제34권1호
• /
• pp.109-120
• /
• 2018

Sidestream in domestic wastewater treatment plants contains high concentration of ammonium, which increases nitrogen loading rate in the mainstream. The process for deammonification consisting of partial nitritation-anaerobic ammonium oxidation (ANAMMOX) and heterotrophic denitrification is an economical method of solving this problem. Currently, about 130 full-scale deammonification plants are fully operating around the world, but none is in Korea. In order to transfer the principal information about sidestream deammonification processes to researchers and operators, we summarized basic concepts, processes type, and key influence factors (e.g., concentration of nitrogen compounds, dissolved oxygen (DO), temperature, and pH). This review emphasis on the processes of single-stage sequencing batch reactor (SBR) deammonification, which are widely used as full-scale plants. Since simultaneous processes of partial nitritation, ANAMMOX and heterotrophic denitrification occur in a single reactor, the single-stage SBR deammonification requires appropriate control/monitoring strategies for several operating factors (DO and pH mostly) to achieve efficient and stable operation. In future, AB-process consisting of A-stage (energy harvesting from organics) and B-stage (ammonium removal without organics) will be applied to the wastewater treatment process. Thus, we suggest mainstream deammonification for B-stage connected with the sidestream deammonification as seeding source of ANAMMOX. We expect that many researchers will become more interested in the sidestream deammonification.