• 전력전자학회논문지
• /
• 제13권3호
• /
• pp.179-185
• /
• 2008

본 논문에서는 SRM의 토크리플 억제를 위하여 PWM(Pulse width modulation)과 직접토크제어(DITC, Direct Instantaneous Torque Control) 방식의 결합에 의한 제어방식을 제안하였다. 기존의 직접토크제어와 달리, 제안된 방식은 한 샘플링 구간 내에서 하나 또는 두 개의 스위칭 모드로 동작하며, 스위칭 패턴의 폭은 토크 오차와 직접 토크제어 방식의 제어규칙에 따라 제어된다. 또한 실제 스위치의 제어폭이 토크 오차에 따라 가변적으로 제어됨으로써, 같은 샘플링 주기에서 기존의 직접토크제어 방식에 비하여 토크리플을 크게 억제할 수 있으며, 토크 연산의 샘플링 주기를 크게 할 수도 있는 장점이 있다. 간단한 제어규칙과 PWM 듀티비의 계산으로 복잡한 연산이 요구되지 않으므로 저가의 마이크로 프로세서에 의해 구현이 가능하다. 제안된 방식은 컴퓨터 시뮬레이션과 실험을 통하여 검증하였다.

• 한국산업보건학회지
• /
• 제21권2호
• /
• pp.99-102
• /
• 2011

Objectives: Acetone/triacetine method for clearing cellulose ester membrane (CEM) filter has been a popular method for air-borne asbestos analysis. However, as a weakness of this method, it is time consuming to analyses asbestos samples after sampling. Crystalclear method can be used to analyses asbestos samples promptly after sampling. Although a strength of crystal clear method exists, there was little valid studied for the method. This study was conducted to compare acetone/triacetine method with crystalclear one for analysing asbestos sample. Methods: Test samples made in three different concentration ranges(low, medium and high concentration) were analysed by phase contrast microscopy after acetone/triacetine and crystalclear method treatment respectively. Results: We did not find statistical difference in analysed results between two methods, which were conducted in three different concentrations ranges. Conclusions: We concluded that crystalclear method can be used as clearing method for air-borne asbestos analysis instead of acetone/triacetine method.

• 한국컴퓨터정보학회논문지
• /
• 제16권3호
• /
• pp.141-147
• /
• 2011

본 논문은 유도전동기의 고장검출 및 진단을 위한 효율적인 2-단계 고장예측 알고리즘을 제안한다. 첫 번째 단계에서는 고장 패턴 추출을 위해 선형 예측 부호화 (Linear Predictive Coding: LPC) 기법을 사용하고, 두 번째 단계에서는 고장 패턴 매칭을 위해 동적시간교정법 (Dynamic Time Warping: DTW)을 사용한다. 유도전동기에서 정상 및 각종 이상 상태의 조건을 발생시켜 추출한 샘플링 주파수 8kHz, 샘플링 시간 2.2초의 정상상태 및 비정상 상태의 진동데이터 8개를 사용하여 모의 실험한 결과, 제안한 고장예측 알고리즘은 기존의 고장진단 알고리즘보다 약 45%의 정확도 향상을 보였다. 또한 TI사의 TMS320F2812 DSP를 내장한 테스트베드 시스템을 제작하여 제안한 고장예측 알고리즘을 구현하고 검증하였다.

• 상하수도학회지
• /
• 제27권3호
• /
• pp.313-324
• /
• 2013

It is widely known that untreated Combined Sewer Overflows (CSOs) that directly discharged from receiving water have a negative impact. Recent concerns on the CSO problem have produced several large scale constructions of treatment facilities, but the facilities are normally designed under empirical design criteria. In this study, several criteria for defining CSOs (e.g. determination of effective rainfall, sampling time, minimum duration of data used for rainfall-runoff simulation and so on) were investigated. Then this study suggested a standard methodology for the CSO calculation and support formalized standard on the design criteria for CSO facilities. Criteria decided for an effective rainfall was over 0.5 mm of total rainfall depth and at least 4 hours should be exist between two different events. An Antecedent dry weather period prior to storm event to satisfy the effective rainfall criteria was over 3 days. Sampling time for the rainfall-runoff model simulation was suggested as 1 hour. A duration of long-term simulation CSO overflow and frequency calculation should be at least recent 10 year data. A Management plan for the CSOs should be established under a phase-in of the plan. That should reflect site-specific conditions of different catchments, and formalized criteria for defining CSOs should be used to examine the management plans.

• Journal of Radiation Protection and Research
• /
• 제33권1호
• /
• pp.13-20
• /
• 2008

석유 및 정유관련 산업에서 다중상(multi-phase flow) 유체의 배관 내 흐름은 일반적인 현상의 하나이다. 그러나 각각의 상에 대한 정확한 유량측정은 항상 정확한 결과획득을 얻는데 장애의 근원으로 작용하였다. 일반 상업용 유량계는 일정 이상의 기포가 포함된 유체 흐름의 경우 유량계측에 상당한 오차를 유발한다. 본 연구에서는 ${\gamma}$-ray attenuation 기법을 이용하여 clamp-on 타입으로 배관 외부에서 다중상 유체흐름의 유량 측정을 수행하였다. 사용된 밀봉 감마선원으로는 $^{137}Cs$ 20 mCi와 17 mCi 두 개의 동위원소를 사용하였으며, 감마선 검출기로는 $2"{\times}2"$ NaI(Tl) 섬광계수관을 이용하였다. 방사선 검출기로부터 데이터를 수집하고 각각의 데이터에 대해 푸리에 변환과 필터링을 통해 노이즈를 최소화하였다. 복원된 신호에 대해 상호상관함수(cross correlation function)를 적용하여 두 검출기 사이의 통과시간(transit time)을 측정함으로써 유량을 산정하였다. 배관 내 기포함량 측정을 통해 유량을 보정해줌으로써 측정유량의 정확도를 높였다. 두 선원간의 거리가 4D(D; inner diameter) 그리고 본 실험의 측정조건(N/S: $0.12{\sim}0.15$, sampling time ${\Delta}\;t$: 4msec) 하에서 기포량(단면적 대비 $6.1\;%{\sim}9.2\;%$) 보정을 통해 산정된 유량은 계측오차가 실제 평균유량 대비 1.7 % 이하인 정확도를 보였다. 또한 두 밀봉 감마선원 간의 거리가 가까울수록 통과시간 측정에 정확도가 향상되므로 보다 정확한 유량측정이 가능하였다. 본 연구를 통해 다중상 혼합유체의 유량을 밀봉감마선원과 상호상관 기법으로 이용하여 계측할 수 있음을 확인하였다. 방사성동위원소의 선택 및 계측시스템의 최적화 조건 등에 대한 추가연구가 수행된다면 석유화학 산업과 같은 장치산업의 유지관리 측면에 경제적으로 크게 기여할 수 있을 것으로 판단된다.

• 한국조경학회지
• /
• 제19권3호
• /
• pp.87-97
• /
• 1991

The primary purpose of this study is to investigate factors and variables which have significant effects on user's satisfaction with recreational activities in Daeshin Natural Park, thereby establishing directions of development of urban parks. To test the causal models of this research, the data were gathered by self-administered questionnaires form 627 households in Pusan City which were selected by the multi-stage probability sampling method. The analysis of the data primarily consists of two-phase: The first analysis dealt exploratory factor analysis which identified major factors involved in satisfaction with recreational activities in Daeshin Natural Park and the second analysis tested the fit of the causal models of this research by employing LISREL methodology. The factor analysis identified that three factors are involved in satisfaction with recreational actitives. The three factors of satisfaction with recreational activities are facilities for health and phisical exercise, group recreational activity, maintenance activity. The second phase analysis tested the fit of the causal models for satisfaction with recreational activity to the data and identified statistically significant causal linkage among overall satisfaction with Daeshin Natural Park, other endogenous factors and exogenous variables.

• Ocean and Polar Research
• /
• 제31권2호
• /
• pp.189-198
• /
• 2009

Passive air samplers with polyurethane foam (PUF) disks were employed to determine seasonal gas phase variation of polycyclic aromatic hydrocarbons (PAHs) in ambient air on Anmyeon island from March 2007 to January 2008. Sum of 13 PAHs ranged between $3.5\;ng/m^3$ and $27.6\;ng/m^3$. Total PAHs during the heating season was 6.2 times higher than non-heating season. The dominant PAHs components during sampling periods were low and middle molecular weight PAHs including phenanthrene, fluoranthene, pyrene and chrysene. Gas exchange fluxes of PAHs across the air-water interface of the Yellow Sea were calculated using a modified two-film exchange model. PAHs fluxes ranged from $196\;ng/m^2/d$ net volatilization during summer to $3830\;ng/m^2/d$ net absorption during winter. Passive air sampler provides a convenient and cost-effective tool for measuring averaged gas phase PAHs, which was successfully used for calculation of gas exchange flux of PAHs in the Yellow Sea.

• 한국대기환경학회지
• /
• 제13권5호
• /
• pp.397-410
• /
• 1997

An annular denuder filter pack sampling system (ADS) was used to collect acidic air pollutants in Pusan. During the study period (from June 1995 to November 1995), forty eight samples were collected every 12 hours starting from 6:00 in the morning. These samples were devided into two sets of data for day (6:00 a.m.-6:00 p.m.) and night (6:00 p.m.-6:00 a.m.). The chemical species were analyzed for HN $O_3$, HN $O_2$, S $O_2$ and N $H_3$ in the gas Phase, and N $O_3$$^{[-10]}$ , S $O_4$$^{2-}$ and N $H_4$$^{+}$ in the particulate phase. The mean concentrations measured from this study were 0.24, 1.91, 30.07 and 4.24 $\mu\textrm{g}$/㎥ for HN $O_3$, HN $O_2$, S $O_2$ and N $H_3$, respectively. The mean concentrations of N $O_3$$^{[-10]}$ , S $O_4$$^{2-}$ and N $H_4$$^+{\ulcorner}$ were 1.95, 7.36 and 3.48 $\mu\textrm{g}$/㎥, respectively. The mean concentrations of gaseous species except for HN $O_2$ were higher in daytime than in nighttime, but the reverse was true in the particulates except for N $H_4$$^{+}$. +/..

• 한국산업보건학회지
• /
• 제21권3호
• /
• pp.139-145
• /
• 2011

Objectives: This investigation is purposed to evaluate the airborne asbestos concentrations in the public buildings having asbestos containing materials(ACMs) in Seoul. Methods: The Seoul Metropolitan Government carried out an asbestos survey to the city-owned public buildings to identify the level of risk exposure, classified into low, moderate and high risk. To evaluate the airborne concentration of asbestos, 11 sampling sites in ten buildings based on the survey were selected. The air samples from the eleven sites were analyzed by Phase Contrast Microscopy(PCM) and Transmission Electron Microscopy (TEM), and compared the analytical results from the both. Results: 1. The airborne fiber concentrations by PCM were less than the detection limit($7f/mm^2$) in 9(82%) out of 11 sampling sites. The highest concentration was 0.0043 f/cc, but it was below the guideline value for indoor air quality(0.01 f/cc), proposed by the Ministry of Environment, Korea. 2. In two sampling sites, having moderate risk level, the chrysotile was identified and showed it's concentrations of 0.0102 s/cc and 0.0058 s/cc, less than $5{\mu}m$ lengths. 3. The ACMs identified in the two sampling sites were a packing material(65% of chrysotile) in mechanical area and a thermal system insulation(5% of chrysotile) in a boiler room. Having more possibility of asbestos emission in the mechanical area, it would be required to set up and carry out the asbestos management plan. Conclusions: Based on the result of this study, the airborne asbestos concentrations in the public buildings with ACMs were generally lower than the guideline value for indoor air quality. There are widespread concerns about the possible health risk resulting from the presence of airborne asbestos fibers in the public buildings. Most of the previous studies about airborne asbestos analysis in Korea were performed based on PCM method that asbestos and non-asbestos fibers are counted together. In the public and commercial buildings, having ACMs, it is suggested that the asbestos be analyzed by TEM method to identify asbestos due to concerns about asbestos exposure to workers and unspecified people.

• The Journal of the Acoustical Society of Korea
• /
• 제20권4E호
• /
• pp.52-60
• /
• 2001

This paper describes real time implementation of subband sound localization system on a floating-point DSP TI TMS320C31. The system determines two dimensional location of an active speaker in a closed room environment with real noise presents. The system consists of an two microphone array connected to TI DSP hosted by PC. The implemented sound localization algorithm is Subband CPSP which is an improved version of traditional CPSP (Cross-Power Spectrum Phase) method. The algorithm first split the input speech signal into arbitrary number of subband using subband filter banks and calculate the CPSP in each subband. It then averages out the CPSP results on each subband and compute a source location estimate. The proposed algorithm has an advantage over CPSP such that it minimize the overall estimation error in source location by limiting the specific band dominant noise to that subband. As a result, it makes possible to set up a robust real time sound localization system. For real time simulation, the input speech is captured using two microphone and digitized by the DSP at sampling rate 8192 hz, 16 bit/sample. The source location is then estimated at once per second to satisfy real-time computational constraints. The performance of the proposed system is confirmed by several real time simulation of the speech at a distance of 1m, 2m, 3m with various speech source locations and it shows over 5% accuracy improvement for the source location estimation.