• Journal of Ocean Engineering and Technology
• /
• v.27 no.5
• /
• pp.70-76
• /
• 2013

The present paper proposes a coupled volume-of-fluid (VOF) and level-set (LS) method for simulating incompressible two-phase flows that include surface tension effects. The interface of two fluids and its motion are represented by a VOF method designed using high-resolution differencing schemes. This hybrid method couples the VOF method with an LS distancing algorithm in an explicit way to improve the calculation of the normal and curvature of the interface. It is developed based on a rather simple algorithm to be efficient for various practical applications. The accuracy and convergence properties of the method are verified in a simulation of a single gas bubble rising in a three-dimensional flow with a large density ratio.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.2
• /
• pp.295-303
• /
• 2013

This paper reports an investigation of pulse width modulation (PWM) techniques for two-phase brushless DC (BLDC) motors fed by a two-phase eight-switch inverter in a fan application. The three-phase BLDC motor is widely applied in industry; however, a lower-cost two-phase BLDC motor and drive circuit has been greatly in demand in recent years. In this paper, we introduce a mathematical model of the two-phase BLDC motor with sinusoidal back electromotive forces (EMFs) based on traditional three-phase BLDC motors. To simplify the drive algorithm and speed up its application, we analyze the principle of block commutation for a two-phase BLDC motor drive in the 180-electrical-degree conduction mode, and we further propose five PWM schemes to improve the commutation performance of the two-phase BLDC drive. The effectiveness of the proposed PWM methods is verified through experiments.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.7
• /
• pp.375-381
• /
• 2004

This paper describes a three-winding transformer protective relaying algorithm based on the ratio of increments of flux linkages (RIFL). To minimize the approximation errors, the algorithm uses integration approximation. The RIFL of the two windings is equal to the turns ratio for all operating conditions except for an internal fault. For a single-phase and three-phase transformer containing the wye-connected windings, the increments of flux linkages (IFL) are calculated. For a three-phase transformer containing the delta-connected windings, the difference of IFL between the two phases are calculated to use the line currents, because the winding currents are practically unavailable. Their ratios are compared with the turns ratio. The comparative study between the proposed and differential approximation methods was conducted. The test results show that the algorithm can reduce the errors resulting from the conventional methods.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.42-45
• /
• 2002

In this paper, multiphase optimization of machine Tool structure is presented. The final goal is to obtain 1) light weight, 2) statically and dynamically rigid. and 3) thermally stable structure. The entire optimization process is carried out in three phases. In the first phase, multiple static optimization problem with two objective functions is treated using Pareto genetic algorithm. where two objective functions are weight of the structure and static compliance. In the second phase, maximum receptance is minimized using simple genetic algorithm. And the last phase, thermal deflection to moving heat sources is analyzed using Predictor-Corrector Method. The method is applied to a high speed line center design which takes the shape of back-column structure.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.2
• /
• pp.32-37
• /
• 2022

As semiconductors become finer, equipment must perform precise and accurate processes to achieve the desired wafer fabrication requirement. Radio frequency power delivery system in plasma system plays a critical role to generate the plasma, and the role of impedance matching unit is critical to terminate the reflected radio frequency power by modifying the impedance of the matching network in the plasma equipment. Impedance matching unit contains one fixed inductor and two variable vacuum capacitors whose positions are controlled two step motors. Controlling the amount of vacuum variable capacitor should be made as soon as possible when the mismatched impedance is detected. In this paper, we present the impedance matching algorithm using the phase sensor.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.3
• /
• pp.255-263
• /
• 2000

A multistage interconnection network is a suitable class of interconnection architecture for constructing large-scale multicomputers. Broadcast and multicast communication are fundamental in supporting collective communication operations such as reduction and barrier synchronization. In this paper, we propose a new multicast technique in wormhole-switched bidirectional multistage banyan networks for constructing large-scale multicomputers. To efficiently support broadcast and multicast with simple additional hardware without deadlock, we propose a two-phase multicast algorithm which takes only two transmissions to perform a broadcast and a multicast to an arbitrary number of desired destinations. We encode a header as a cube and adopt the most upper input link first scheme with periodic priority rotation as arbitration mechanism on contented output links. We coalesce the desired destination addresses into multiple number of cubes. And then, we evaluate the performance of the proposed algorithm by simulation. The proposed two-phase multicast algorithm makes a significant improvement in terms of latency. It is noticeable that the two-phase algorithm keeps broadcast latency as efficient as the multicast latency of fanout 2^m where m is the minimum integer satisfying $2^m{\geq} {\sqrt{N}}$ ( N is a network size).

• Nuclear Engineering and Technology
• /
• v.46 no.1
• /
• pp.109-116
• /
• 2014

An electrical resistance tomography (ERT) technique combining the particle swarm optimization (PSO) algorithm with the Gauss-Newton method is applied to the visualization of two-phase flows. In the ERT, the electrical conductivity distribution, namely the conductivity values of pixels (numerical meshes) comprising the domain in the context of a numerical image reconstruction algorithm, is estimated with the known injected currents through the electrodes attached on the domain boundary and the measured potentials on those electrodes. In spite of many favorable characteristics of ERT such as no radiation, low cost, and high temporal resolution compared to other tomography techniques, one of the major drawbacks of ERT is low spatial resolution due to the inherent ill-posedness of conventional image reconstruction algorithms. In fact, the number of known data is much less than that of the unknowns (meshes). Recalling that binary mixtures like two-phase flows consist of only two substances with distinct electrical conductivities, this work adopts the PSO algorithm for mesh grouping to reduce the number of unknowns. In order to verify the enhanced performance of the proposed method, several numerical tests are performed. The comparison between the proposed algorithm and conventional Gauss-Newton method shows significant improvements in the quality of reconstructed images.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2002.05a
• /
• pp.120-127
• /
• 2002

The multicasting is defined as the distribution of the same information stream from one to many nodes concurrently. There has been an intensive research effort to design protocols and construct multicast routing graphs for a single multicast group. However. there have been few researches about the relation between multiple and concurrent multicast groups. In this paper, the multiple multicast tree allocation algorithm to avoid congestion is proposed. The multicast group with different bandwidth requirement is also considered. A two-phase algorithm is proposed. The first phase is for basic search and the second phase for further improvement. The performance of the proposed algorithm is experimented with computational results. Computational results show that the proposed algorithm outperforms an existing algorithm.

• International Journal of Ocean System Engineering
• /
• v.2 no.3
• /
• pp.139-150
• /
• 2012

This paper presents an improved guidance algorithm for autonomous underwater vehicles (AUV) in 3D space for generating smoother vehicle turn during the course change at the way-points. The way-point guidance by the line-of-sight (LOS) method has been modified for correcting the reference angles to achieve minimal calculation and smoother transition at the way-points. The algorithm has two phases in which the first phase brings the vehicle to converge to a distance threshold point on the line segment connecting the first two way-points and the next phase generates an angular path with smoother transition at the way-points. Then the desired angles are calculated from the reference and correction angles. The path points are regularly parameterized in the spherical coordinates and mapped to the Cartesian coordinates. The proposed algorithm is found to be simple and can be used for real time implementation. The details of the algorithm and simulation results are presented.

• Nuclear Engineering and Technology
• /
• v.39 no.4
• /
• pp.313-326
• /
• 2007

In this paper, an algorithm to reconstruct two orthogonal images into a three-dimensional image is developed in order to measure the bubble size and volume in a two-phase boiling flow. The central-active contour model originally proposed by P. $Szczypi\'{n}ski$ and P. Strumillo is modified to reduce the dependence on the initial reference point and to increase the contour stability. The modified model is then applied to the algorithm to extract the object boundary. This improved central contour model could be applied to obscure objects using a variable threshold value. The extracted boundaries from each image are merged into a three-dimensional image through the developed algorithm. It is shown that the object reconstructed using the developed algorithm is very similar or identical to the real object. Various values such as volume and surface area are calculated for the reconstructed images and the developed algorithm is qualitatively verified using real images from rubber clay experiments and quantitatively verified by simulation using imaginary images. Finally, the developed algorithm is applied to measure the size and volume of vapor bubbles condensing in a subcooled boiling flow.