• Wind and Structures
• /
• 제30권4호
• /
• pp.339-366
• /
• 2020

This study aims at modeling boundary layers (BLs) encountered in sparse and built environments (i.e. open, suburban and urban) at the subsonic Wind Tunnel (WT) at Ryerson University (RU). This WT has an insignificant turbulence intensity and requires a flow-conditioning system consisting of turbulence generating elements (i.e., spires, roughness blocks, barriers) to achieve proper turbulent characteristics. This system was developed and validated in the current study in three phases. In phase I, several Computational Fluid Dynamic (CFD) simulations of the tunnel with generating elements were conducted to understand the effect of each element on the flow. This led to a preliminary design of the system, in which horizontal barriers (slats) are added to the spires to introduce turbulence at higher levels of the tunnel. This design was revisited in phase II, to specify slat dimensions leading to target BLs encountered by tall buildings. It was found that rougher BLs require deeper slats and, therefore, two-layer slats (one fixed and one movable) were implemented to provide the required range of slat depth to model most BLs. This system only involves slat movement to change the BL, which is very useful for automatic wind tunnel testing of tall buildings. The system was validated in phase III by conducting experimental wind tunnel testingof the system and comparing the resulting flow field with the target BL fields considering two length scales typically used for wind tunnel testing. A very good match was obtained for all wind field characteristics which confirms accuracy of the system.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2006년도 추계학술대회 논문집
• /
• pp.111-112
• /
• 2006

In order to investigate flow characteristics of blood flow in a micro tube ($100{\mu}m$ in diameter) according to hematocrit, in-vitro experiments were carried out using a micro-PIV technique. The micro-PIV system consists of a microscope, a 2 head Nd:YAG laser, a 12 bit cooled CCD camera and a delay generator. Blood was supplied into the micro tube using a syringe pump. Hematocrit of blood was controlled to be 20%, 30% and 40%. The blood flow has a cell free layer near the tube wall and its thickness was changed with increasing the flow rate and hematocrit. The hemorheological characteristics such as shear rate and viscosity were evaluated using the velocity field data measured. As the flow rate increased, the blunt velocity profile in the tube center was sharpened. The viscosity of blood was rapidly increased with decreasing shear rate, especially in the region of low shear rate, changing RBC rheological properties. The variation of velocity profile and blood viscosity shows typical characteristics of Non-Newtonian fluids. On the basis of inflection points, the cell free layer and two-phase flow consisting of plasma and suspensions including RBCs were clearly discriminated.

• Journal of applied mathematics & informatics
• /
• 제25권1_2호
• /
• pp.67-83
• /
• 2007

The characteristics of steady two-dimensional laminar boundary layer flow of a viscous and incompressible fluid past a moving wedge with suction or injection are theoretically investigated. The transformed boundary layer equations are solved numerically using an implicit finite-difference scheme known as the Keller-box method. The effects of Falkner-Skan power-law parameter (m), suction/injection parameter ($f_0$) and the ratio of free stream velocity to boundary velocity parameter (${\lambda}$) are discussed in detail. The numerical results for velocity distribution and skin friction coefficient are given for several values of these parameters. Comparisons with the existing results obtained by other researchers under certain conditions are made. The critical values of $f_0$, m and ${\lambda}$ are obtained numerically and their significance on the skin friction and velocity profiles is discussed. The numerical evidence would seem to indicate the onset of reverse flow as it has been found by Riley and Weidman in 1989 for the Falkner-Skan equation for flow past an impermeable stretching boundary.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.401-402
• /
• 2006

The turbulent flow around a sphere was investigated using two experimental techniques: smoke-wire flow visualization in wind tunnel at Re=5300, 11000 and PIV measurements in a circulating water channel. The smoke-wire visualization shows flow separation points near an azimuthal angle of $90^{\circ}$, recirculating flow, transition from laminar to turbulent shear layer, evolving vortex roll-up and fully turbulent eddies in the sphere wake. The mean velocity field measured using a PIV technique in x-y center plane demonstrates the detailed near-wake structure such as nearly symmetric recirculation region, two toroidal vortices, laminar separation, transition and turbulent eddies. The PIV measurements of turbulent wake in y-z planes show that a recirculating vortex pair dominates the near-wake region.

• 한국항공우주학회지
• /
• 제31권2호
• /
• pp.10-16
• /
• 2003

초음속 유동장에서 비정상 직열배치공동 유동 연구를 Navier-Stokes 방정식과 k-$\varepsilon$난류모델을 이용하여 수치 모사하였다. 공동주위의 비정상유동은 자유 전단층과 공동 내부 유동의 상호 작용에 의한 주기성으로 특정지어진다. 수치적 방법은 van Leer의 유량한계계수를 이용한 유량벡터분리법에 기반을 둔 TVD방법을 사용하였다. 먼저, 단일 공동에 대한 압력비 그래프를 통한 주진동 주파수를 비교하였다. 직열배치공동유동에서는 전후방 공동을 몇가지 세장비로 조합하여, 전방 공동의 영향에 의한 후방 공동 유동장의 주진동 주파수 특성등을 분석하였다. 전방공동의 세장비가 작은 경우에는 강한 전방공동의 전단층이 후방공동의 전단츨과 합하여 하나의 전단층 특성을 줌으로 전후방 공동의 주진동특성이 비슷하게 나타나고, 전방공동의 세장비가 큰경우에는 전방공동의 전단층이 확산되면서 내부에 후방공동의 전단층이 발생함으로 주진동수의 특성이 다르게 나타나는 것을 볼 수 있었다.

• 한국해양학회지
• /
• 제28권1호
• /
• pp.17-23
• /
• 1993

회전반 위에서 상하경계면이 경사진 (${\beta}-effect$) 원통용기에 이층유체를 만들어 하층에 같은 밀도를 갖는 외부유체를 주입하여 경계면 변형에 따른 상층유체의 흐름을 관찰하였다. 상하층유체간의 경계면마찰을 최소화하여 하층유체운동(Sverdrup type) 에 따른 경계면의 변화에 적응하기 위한 상승유체 흐름은 internal Frounde Number($F_1$)에 민감하게 반응함을 보인다. 특히 $F_1$값이 6이상인 경우에는 상층유체운동 특성인 두 개의 폐쇄순환의 방향이 반대가 되어 서안경계류의 분리현상을 나타내고 있다. 서안에서의 분리 지점 역시 $F_1$값에 의존하며, 특히 $F_1{\;}~{\;}6$인 경우 가장 북쪽에서 분리되는 현상을 보였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 추계 학술대회논문집
• /
• pp.158-163
• /
• 2003

This paper assesses the two-equation turbulence models available in a commercial code, FLUENT, for heat transfer in a turbulent heated pipe flow. In case of flow under $Re_D=10,000$, Standard $\kappa-\epsilon$ and Realizable $\kappa-\epsilon$ models overpredict the Nusselt number about $20\%$ compared with the experimental correlation, and RNG $\kappa-\epsilon$ model overpredicts about $30\%$ when the two-layer zonal method is employed. When wall function method is adopted, all $\kappa-\epsilon$ models show better predictions. Standard $\kappa-\omega$ and SST $\kappa-\omega$ models have the dependency on the first grid point ($0.3). As Reynolds number becomes high, the predictions of all $\kappa-\epsilon$ and $\kappa-\omega$ models are in a good agreement with the experimental correlation.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1997년도 제15회 KOSCO SYMPOSIUM 논문집
• /
• pp.113-122
• /
• 1997

The conditional moment closure formulation considering the molecular and turbulent diffusion is derived. A simplified solution procedure is proposed to reduce the computational burden due to the increased dimensionality of the conditionally averaged variables. A conditionally averaged variable is expressed as a linear weighted average of the two extremes, 'no reaction' and 'equilibrium' states. The modified elliptic-type conditional moment closure formulation is implemented to simulate a two dimensional nonpremixed mixing layer reacting flow. Results show good agreement for the conditional averages of the species concentration in Bilger et al.

• 대한기계학회논문집
• /
• 제15권6호
• /
• pp.1919-1932
• /
• 1991

본 연구에서는 고강도 알루미늄 합금으로 제작된 평판보의 받음각(.alpha.)를 10˚ 에서 30˚까지 10˚씩 변화시킨 3가지의 모델에 대해, 각 모델의 Re$_{d}$수 변화에 대한 후류의 스펙트럼분석, 레이저 도플러 유속계(laser doppler velocimetry)를 이용 한 유동장 해석 및 평판보의 응답을 실험을 통해 조사, 분석하고 유동장과 측정이 용 이하지 않은 얇은 평판주위의 압력분포에 대한 전산해석을 수행함으로써 유동 여기진 동 구조의 규명을 시도하였다.다.

• 대한기계학회논문집
• /
• 제9권4호
• /
• pp.403-413
• /
• 1985

본 논문에서는 수직벽 하류에 형성되는 박이 전단층의 발전과 재부착 그리고 재발전 경계층에 대해 평균 속도, 벽면의 압력 분포, 난류 강도, 레이놀즈 전단 압력 및 아직 수직벽에 대해서는 보고된바 없는 난류 떨림 속도 성분들의 3승곱 통계치를 측정하여 난류 구조의 변화를 분석하고 이를 수치적 계산 모델개발의 자 료로 제공하고자 함이 이 연구의 목적이다.