• Journal of Power Electronics
• /
• 제3권3호
• /
• pp.145-150
• /
• 2003

Reliability, availability, and cost have been the major concerns for photovoltaic hybrid systems since their beginning as primary sources for much critical applications like communication units and repeaters. This paper descnbes the performance of two hybrid systems, photovoltaic-battery, wind-turbine coupled with the public-grid (PVBWG) hybrid system and photovoltaic-battery, wind-turbine coupled With the diesel generator (PVBWD) hybrid system The systems are sized to power a typical 300W/48V de telecommunication load continuously throughout the year Such hybrid systems consist of subsystems, which in turn consist of components Failure of anyone of these components may cause failure of the entire system. The reliability and availability basics, and estimation procedure for the two proposals are introduced also in this paper. The PVBWG and PVBWD system configurations are shown with the relevant mean-time-between-faIlure (MTBF) and failure rate (${\lambda}$) of each component. The characteristics equations of the two systems are deduced as a function of operating hours and the percentage of sun and wind availabilities per day. The system probability failure as well as the reliability is estimated based on the fault tree analysis technique. The results show that, by using standard or normal components MTBF, the PVBWG is more reliable and the time of periodic maintenance period is more than one year especially in the rich sites of both sun and wind, but PVBWD competes else Also, in the first five years from the system installation, the system is quit reliable and may not require any maintenance. The results show also, as the sun and wind are available, as the system reliable and available.

• 수산해양기술연구
• /
• 제20권2호
• /
• pp.105-111
• /
• 1984

추측항법과 Loran C 항법을 결합한 Hybrid 항법의 정도를 평가하기 위하여, 군산수산전문대학 실습선 전북 401, 403 호에 설치되어 있는 Hybrid항법장치를 이용하여 1982년 7월부터 1983년 6월 사이에 한국서해안 해역에서 실선관측을 행하여 그 측위의 정도를 Radar 위치와 비교.검토한 결과는 다음과 같다. 1. 9970, 5970 Chain의 Loran C 시간차의 표준편차는 각각 약 0.21$\mu$s, 약 0.06$\mu$s로 5970 Chain의 시간차 변동이 9970 Chain보다 적었다. 2. Hybrid위치와 Loran C 위치는 Radar 위치와의 편위거리가 각각 약 0.4 mile, 약 0.51 mile로서 Hybrid 항법이 Loran C 항법보다 정도가 더 높았다. 3. Hybrid 위치와 Loran C의 계산기 simulation 위치는 Radar 위치와의 위치거리가 각각 0.4 mille, dir 0.98 mile로 Hybrid 항법이 Loran C의 계산기 simulation 위치보다 정도가 더 높았으며, 추측위치의 미소한 변동에 대한 Loran C의 변위량을 보정하면 Loran C의 계산기 simulation 위치의 정도도 더 높일 수 있음을 알 수 있었다.

• 대한기계학회논문집B
• /
• 제31권5호
• /
• pp.448-456
• /
• 2007

Performance of PEM fuel cell systems and hybrid systems combining a PEMFC with a gas turbine have been evaluated. Two different reforming methods(steam reforming and autothermal reforming) were considered. Performances of fuel cell systems with two reforming methods were compared and effects of various design parameters on the system performance were investigated. Configurations of PEM fuel cell systems with two reforming methods have been revised to accommodate a gas turbine, resulting in PEMFC/GT hybrid systems. Performance of the hybrid systems were analyzed and compared with those of PEM systems. Influences of major design parameters on the hybrid system performance were also investigated.

• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 2003년도 추계공동학술대회
• /
• pp.707-720
• /
• 2003

Product factory is a real-time financial product design system for the Internet customers. The hybrid product is a product taking combined characteristics of two different products. Hybrid product factory is a product factory that designs hybrid products from two different products based on both business rules and customer requirements. Though the importance of product factory is emphasized in the industry, there has not been much research peformed regarding product factory. In this research, we developed a product factory system that designs hybrid products. To design a hybrid product, it is necessary to have a method to combine attributes and values of two different products, and a method to control the combining operations to properly reflect business requirements. In this research, we developed four different combining operators and business rule representations. In addition, to prove the effectiveness of this methods, we implemented a prototypical system and demonstrated on cases regarding financial loan products.

• Journal of Computational Design and Engineering
• /
• 제2권3호
• /
• pp.137-147
• /
• 2015

In this study, a new methodology in predicting a system output has been investigated by applying a data mining technique and a hybrid type II fuzzy system in CNC turning operations. The purpose was to generate a supplemental control function under the dynamic machining environment, where unforeseeable changes may occur frequently. Two different types of membership functions were developed for the fuzzy logic systems and also by combining the two types, a hybrid system was generated. Genetic algorithm was used for fuzzy adaptation in the control system. Fuzzy rules are automatically modified in the process of genetic algorithm training. The computational results showed that the hybrid system with a genetic adaptation generated a far better accuracy. The hybrid fuzzy system with genetic algorithm training demonstrated more effective prediction capability and a strong potential for the implementation into existing control functions.

• 한국안전학회지
• /
• 제32권6호
• /
• pp.81-88
• /
• 2017

This study deals with the optimal design of a hybrid control system composed of a combination of active control system and passive control system for effective seismic performance improvement of two adjacent structures. The proposed hybrid control system adopts a configuration of installing an active control device in one building and connecting two adjacent structures with a passive control device so that the one-side active control force can be bi-directionally applied to both buildings through the passive connecting devices. In order to derive the optimal performance of the proposed system, the design parameters of the passive and active control systems were searched using the genetic algorithm. Numerical simulations of 10-story and 8-story buildings have been performed to verify the effectiveness of the proposed technique. For the purpose of comparison, the conventional independent control system with two identical active control systems being installed separately for each structure was also optimally designed and its seismic response has been evaluated as well. From the comparative results of the two control systems, it is demonstrated that the proposed hybrid control system requires larger control force for its one-side active control device than the conventional independent control system does for each of both-side active devices, but quite less than the total control force required for both-side devices of the independent control system, while maintaining similar seismic performance. Therefore, the proposed system is more economical and reliable than the conventional independent control system with two identical active devices.

• 한국정보기술학회 영문논문지
• /
• 제9권1호
• /
• pp.25-37
• /
• 2019

Power-line communication (PLC) has influenced smart grid development. In addition, PLC has also been instrumental in current research on internet-of-things (IoT). Due to the implementation of PLC in smart grid and IoT environments, strides have been made in PLC and its combination with the wireless system to form a hybrid communication system. Also, PLC has evolved from a single-input-single-output (SISO) configuration to multiple-input-multiple-output (MIMO) configuration system, and from a point-to-point communication system to cooperative communication systems. In this work, we extend a MIMO wireless two-way amplify-and-forward (AF) cooperative communication system to a hybrid PLC and wireless (PLC/W) system configuration. We then maximize the weighted sum-rate for the hybrid PLC/W by optimizing the precoders at each node within the hybrid PLC/W system. The sum-rate problem was found to be non-convex, therefore, an iterative algorithm is used to find the optimal precoders that locally maximize the system sum-rate. For our simulation results, we compare our proposed hybrid PLC/W configuration to a PLC only and wireless only configuration at each node. Due to an improvement in system diversity, the hybrid PLC/W configuration outperformed the PLC only and wireless only system configurations in all simulation results presented in this paper.

• Journal of Microbiology
• /
• 제38권2호
• /
• pp.113-116
• /
• 2000

Escherichia coli F plasmid partition apparatus is composed of two trans-acting proteins (SopA and SopB) and one cis-acting DNA sequence (sopC). The SopB-sopC complex has been suggested to serve a centromere-like function through its interaction with chromosomally encoded proteins which remain to be identified. In this paper, we are introducing a new yeast 1.5-hybrid system which assembles the two-hybrid and one-hybrid system as a mean to find and additional component of the F plasmid partition system, interacting with DNA (sopC)-bound SopB protein. The results indicates that this system is a promising one, capable of selecting an interacting component.

• 한국산학기술학회논문지
• /
• 제9권6호
• /
• pp.1795-1799
• /
• 2008

hnRNP K 단백질은 hnRNP 복합체를 구성하는 핵단백질들 중의 하나이며 시토신이 많은 RNA/DNA sequence에 잘 결합한다. 이 단백질은 핵 내에서만 머무르지 않고 핵과 세포질을 왕복하는 특징을 지니고 있다. hnRNP K의 기능을 조사하기 위하여 우선 hnRNP K와 상호 결합하는 세포내 단백질을 찾아내고자 하였다. 이를 위하여 본 연구에서는 이스트 two-hybrid 시스템을 사용하여 HeLa CDNA librar를 탐색하였다. 그 결과 얻은 클론들 중에는 사람의 hnRNP E1 (poly(rC) binding protein 1) cDNA (GenBank accession number XM_031585) 클론이 포함되어 있었다. 본 논문에서는 이스트 two-hybrid 시스템과 in vitro에서의 생화학적 실험을 통하여 hnRNP E1은 hnRNP K와 특이적으로 상호 결합한다는 것을 밝혔다.

• 대한전자공학회논문지TC
• /
• 제40권10호
• /
• pp.16-23
• /
• 2003

본 논문에서 광 네트워크에서 광 버스트 스위칭(Optical Burst Switching, OBS)과 광 회선 스위칭 (Optical Circuit Switching, OCS) 기술의 장점을 동시에 가지는 새로운 광 hybrid 스위칭(Optical Hybrid Switching) 시스템을 제안한다. 이 시스템은 들어오는 IP 트래픽을 hybrid 스위칭을 위해 짧은(short-lived) 흐름과 긴(long-lived) 흐름 구분한다. 성능 분석을 위하여 시스템을 Markovian 환경에서 단일 서버 큐로서 모델링 한다. 버스트 생성 프로세스는 two-state Markov Modulated Poisson Process (MMPP)를 따른다고 가정하고 서비스 율은 동시에 발생하는 OCS 세션의 수에 따라 변한다. OBS 버스트에 대한 평균 지연 및 큐 사이즈의 결과를 보인다.