• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.1
• /
• pp.214-221
• /
• 2007

This paper presents a myoelectric hand prosthesis(MHP) with two degree of freedom(2-DOF), which consists of a mechanical hand, a surface myoelectric sensor(SMES) for measuring myoelectric signal, a control system and a charging battery. The actuation for the 2-DOF hand functions such as grasping and wrist rotation was performed by two DC-motors, and controlled by myoelectric signal measured from the residual forearm muscle. The grip force of the MHP was automatically changed by a mechanical automatic speed reducer mounted on the hand. The skin interface of SMES was composed of the electrodes using the SUS440 metal in order to endure a wet condition due to the sweat. The sensor was embedded with a amplifier and a filter circuit for rejecting the offset voltage caused by power line noises. The control system was composed of the grip force sensor, the slip sensor, and the two controllers. The two controllers were made of a RISC-type microprocessor, and its software was executed on a real-time kernel. The control system used Force Sensing Resistors, FSR, as slip pick-ups at the fingertip of a thumb and the grip force information was obtained from a strain-gauge on the lever of the MHP. The experimental results were showed that the proposed control system is feasible for the MHP.

• Journal of the Korean Society of Safety
• /
• v.25 no.6
• /
• pp.40-46
• /
• 2010

To protect press operator from the after-reach hazard, current Ministry of Labor Notification(MOLN) requires the use of a formula for calculating the safe distance away from the point of operation for locating press protective devices, Two Hand Control Devices(THCD) and Active Opto-Electronic Protective Devices(AOPD), on a power press. This formula is based on a same hand speed constant of 160cm/s. While EN standards use different hand speed constant for THCD and AOPD respectively. The objective of this study is to compare two guidelines on the hand speed constant published by MOLN and EN 692, also to propose a proper hand speed constant and validate it experimentally. As a experimental result, it could be known that hand speed constant of Ministry of Labor Notification should be improved as that of EN standards.

• American Studies
• /
• v.43 no.1
• /
• pp.115-143
• /
• 2020

The U.S. Congress has been known to effectively control the bureaucracy. On one hand, Congress adjusts the degree of discretion provided to the bureaucracy when making agencies or legislation: ex ante control. On the other hand, it also performs the oversight activities to punish or correct undesirable behaviors of bureaucrats: ex post control. While the dynamics of each control mechanism is widely examined theoretically, few have attempted to empirically investigate this with a special attention to partisan politics in Congress. I attempt to fill this gap by measuring the two types of control mechanisms, testing theoretical assertions, and analyzing the dynamics under the two control mechanisms.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10b
• /
• pp.185-190
• /
• 1993

The POSTECH Hand adopting coupled tendon driven technique with planar two fingers is developed. The hand is designed to emulate principal motions of the human hand which has two and three joints respectively. Its kinematic parameters are determined through a parameter optimizing technique to aim at improving the isotropy of fingertip motions with new criterion functions of design. For the control of the hand, tension and torque control algorithms are developed. Based on the virtual stiffness concept, we develop the stiffness control method of a grasped object with redundant finger mechnism and investigate experimentally.

• The Journal of Korean Physical Therapy
• /
• v.36 no.1
• /
• pp.14-20
• /
• 2024

Purpose: This study was performed to identify and investigate the therapeutic effects of low-level laser (LLL) combined with a light-emitting diode (LED) on post-operative wound healing and functional recovery after hand orthopedic surgery. Methods: The study subjects were twenty patients who had passed the acute inflammatory phase after hand orthopedic surgery and were assigned equally to an experimental or a control group. Phototherapy was administered three times weekly for two weeks. Changes in wound length, edema, pain, and hand function were measured. Results: Significant differences in wound length, edema, pain, and hand function were observed between the experimental and control groups (p<0.05). However, no significant intergroup difference was observed (p>0.05). Nonetheless, a comparison of results showed changes in the experiment group over the two-week study period were significantly greater than in the control group (p<0.05). Conclusion: These findings show that combined LLL plus LED phototherapy positively influences post-operative hand rehabilitation.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.250-252
• /
• 2007

In this paper presents a control algorism for myoelectric hand prosthesis(MHP) with 2 degree of freedom(DOF), which consists of a mechanical hand, a surface myoelectric sensor(SMES) for measuring myoelectric signal, a control system and a charging battery. The actuation for the 2-DOF hand functions such as grasping and wrist rotation was performed by two DC-motors, and controlled by myoelectric signal measured from the residual forearm muscle. The two controllers were made of a RISC-type microprocessor, and its software was executed on a real-time kernel. The experimental results were showed that the proposed a control algorism is feasible for the MHP.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.12
• /
• pp.1248-1255
• /
• 2011

In daily life, another major role of human hand is a communicative function using hand gestures besides grasp function. Therefore, if amputees can express their intention by the prosthetic hand, they can much actively participate in social activities. Thus, this paper propose myoelectric multi-function prosthetic hand which can express 6 useful hand gestures such as Rock, Scissors, Paper, Indexing, Ok and Thumb-up. It was designed as under-actuated structure to minimize volume and weight of the prosthetic hand. Moreover, in order to effectively control various hand gestures by only two EMG sensors, we propose a control strategy that the signal type are expanded as "Strong" and "Light", and hand gestures are hierarchically classified for the intuitive control. Finally, we prove the validity of the developed prosthetic hand with the experiment.

• Research in Community and Public Health Nursing
• /
• v.20 no.4
• /
• pp.493-502
• /
• 2009

Purpose: This study adopted the non-equivalent control group pre-posttest design in order to examine the effects of aromatherapy and hand massage on anxiety, sleep, and depression in the female aged at residential facilities. Methods: This study was executed with the female aged at two residential facilities divided into an experimental group (n=35) and a control group (n=37). Data were collected by checking changes in the anxiety, sleep, and depression of the subjects who had received aromatherapy and hand massage ten times for two weeks. The data were analyzed using Chi-square test and ANCOVA (Analysis of Covariance). Results: The condition of anxiety and depression of the experimental group who had received aromatherapy and hand massage was significantly lower than that of the control group. Also, the condition of sleep of experimental group was significantly higher than that of the control group. Conclusion: The aromatherapy and hand massage program had a positive effect on institutionalized elders' anxiety, sleep, and depression pattern.

• International Journal of Precision Engineering and Manufacturing
• /
• v.4 no.3
• /
• pp.12-19
• /
• 2003

This paper describes the design of a robot's hand with two fingers for stably grasping an unknown object, and the development of a 3-axis force sensor for which is necessary to constructing the robot's fingers. In order to safely grasp an unknown object using the robot's fingers, they should measure the forces in the gripping and in the gravity directions, and control the measured forces. The 3-axis force sensor should be used for accurately measuring the weight of an unknown object in the gravity direction. Thus, in this paper, the robot's hand with two fingers for stably grasping an unknown object is designed, and the 3-axis force sensor is newly modeled and fabricated using several parallel-plate beams.

• Journal of Korea Game Society
• /
• v.3 no.2
• /
• pp.24-29
• /
• 2003

The market of digital avatar with internet and digital technology is increasing rapidly. The users want to express any free-formed motion of their avatars in the cyber space. The user s motion capturing method as the avatar's motion can express any free-formed motion of the avatar in real-time but the methods are expensive and inconvenient. In this paper, we proposed a new method of expressing any free-formed motion of the avatar in real-time. The proposed method is an algorithm for real-time control of a 3D avatar in symmetry-formed free motion. Specially, the algorithm aims at the motion control of a 3D avatar for online dancing games. The proposed algorithm uses the skeleton character model and controls any one of two hands of the character model by a joystick with two sticks. In the symmetry-formed motion, the position and orientation of one hand can determine the position and orientation of the other hand. And the position and orientation of a hand as an end-effector can determine the pose of the arm by Inverse Kinematics. So the algorithm can control the symmetry-formed free motions of two arms by one joystick with two sticks. In the dance game, the algorithm controls the arm motion by the joystick and the other motion by the motion captured DB.