• 한국해안해양공학회지
• /
• 제18권3호
• /
• pp.189-197
• /
• 2006

수치해석을 통하여 이어도 종합해양과학기지 구조물이 대기 유동에 미치는 영향을 분석하였고, 이 결과를 바탕으로 과학기지에 설치된 풍속센서에서의 측정값 오차를 평가하는 연구를 수행하였다. 과학기지 형상을 3차원으로 모델링하였고 수치해석을 위한 격자를 생성하여, Navier-Stokes 방정식 및 난류모델을 적용하여 수치해석을 수행하였다. 선정된 자유류의 풍속과 풍향 조건에 대하여 과학기지 구조물에 의해 변화된 유동장을 계산하고, 실제 풍속센서가 설치된 위치에서의 풍속/풍향 정보와 자유류를 비교하였다. 이를 통하여 자유류 방향 및 측정 위치에 따른 데이터의 정확도와 신뢰할 수 있는 데이터 범위를 알아보았다. 본 연구 결과로 관측된 해상풍 데이터의 구조물 간섭에 의한 오차 범위를 정량적으로 파악할 수 있었으며, 과학기지가 위치한 지점의 정확한 해상풍 데이터 제공을 위한 기초 자료로 활용될 것으로 기대된다.

• 대한환경공학회지
• /
• 제28권12호
• /
• pp.1287-1292
• /
• 2006

인공습지는 다양한 유형의 하수, 폐수에 대해 높은 제거효율을 가진 것으로 알려져 있다. 상향류식 인공습지는 10여년 전부터 많이 이용되는 이공습지 공법중의 하나이다. 본 연구에서는 인공습지의 하나인 부들(cattail)을 perlite에 식재한 상향류식 수초여과지(upflow vegetated filter UVF)장치와 수리동역학적 입자물질 전처리장치(hydrodynamic separator, HDS)를 조합한 장치를 제작하여 온실에 설치하였고, 인공하수에 대한 영양염류제거능을 분석하였다. 본 연구의 목적은 (i) 파일겆 규모의 UVF장치의 영양염류 처리능을 분석함에 있으며 (ii) Froude 수에 의한 확대설계시 직경에 대한 처리용량을 도출함에 있다 인공하수의 처리능을 분석한 결과 평균 수면적부하율 $22.7{\pm}9.6\;m^3/m^2/day$ 범위의 운전조건에서 인공하수의 처리능을 분석한 결과 평균 제거효율은 $COD_{Mn}$, TN, TP에 대해 각각 57.5%, 40.0%. 41.5%를 나타내었다. Froude수를 이용한 무차원 상사법칙을 이용하여 UVF장치의 실규모 설계용량을 산정한 결과 UVF의 직경을 3 m로 설계할 경우 75 $m^3/day$ 범위까지 처리가 가능한 것으로 산정되었다.

• 한국물환경학회지
• /
• 제32권3호
• /
• pp.243-252
• /
• 2016

In cases of water pollution accidents, accurate prediction for arrival time and concentration of contaminants in a river is essential to take proper measures and minimize their impact on downstream water intake facilities. It is critical to fully understand the behavior characteristics of contaminants on river surface, especially in case of oil spill accidents. Therefore, in this study, the effects of main parameters of advection and diffusion of contaminants were analyzed and validated by comparing the results of Lagrangian particle tracking (LPT) simulation of Environmental Fluid Dynamic Code (EFDC) model with those of Global Position System (GPS)-equipped drifter experiment. Prevention scenario modeling was accomplished by taking cases of movable weir operation into account. The simulated water level and flow velocity fluctuations agreed well with observations. There was no significant difference in the speed of surface particle movement between 5 and 10 layer modeling. Therefore, 5 layer modeling could be chosen to reduce computational time. It was found that full three dimensional modeling simulated wind effects on surface particle movements more sensitively than depth-averaged two dimensional modeling. The diffusion range of particles was linearly proportional to horizontal diffusivity by sensitivity analysis. Horizontal diffusivity estimated from the results of GPS-equipped drifter experiment was 0.096 m²/sec, which was considered to be valid for applying the LPT module in this area. Finally, the scenario analysis results showed that particle movements could be stagnant when discharge from the upstream weir was reduced, implying the possibility of securing time for mitigation actions such as oil boom installation and wiping oil contaminants. The outcomes of this study can help improve the prediction accuracy of particle tracking simulation to establish the most suitable mitigation plan considering the combination of movable weir operation.

• KIEAE Journal
• /
• 제17권1호
• /
• pp.69-75
• /
• 2017

Purpose: Heat transfer analysis of recently developed 'slim type double-skin system window' were presented. This window system is designed for curtain wall type façade that main energy loss factor of recent elegant buildings. And the double skin system is the dual window system integrated with inner shading component, enclosed gap space made by two windows when both windows were closed and shading component effectively reflect and terminate solar radiation from outdoor. Usually double-skin system requires much more space than normal window systems but this development has limited by 270mm, facilitated for curtain wall façade buildings. In this study, we estimated thermophysical phenomena of our double-skin curtain wall system window with solar load conditions at the summer season. Method: A fully 3-Dimentional analysis adopted for flow and convective and radiative heat transfer. The commercial CFD package were used to model the surface to surface radiation for opaque solid region of windows' frame, transparent glass, fluid region at inside of double-skin and indoor/outdoor environments. Result: Steep angle of solar incident occur at solar summer conditions. And this steep solar ray cause direct heat absorption from outside of frame surface rather than transmitted through the glass. Moreover, reflection effect of shading unit inside at the double-skin window system was nearly disappeared because of solar incident angle. With this circumstances, double-skin window system effectively cuts the heat transfer from outdoor to indoor due to separation of air space between outdoor and indoor with inner space of double-skin window system.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2009년도 학술논문요약집
• /
• pp.187-187
• /
• 2009

Opening of fractures induced by shear dilation or normal deformation can be a significant source of fracture permeability change in fractured rock, which is important for the performance assessment of geological repositories for spent nuclear fuel. As the repository generates heat and later cools the fluid-carrying ability of the rocks becomes a dynamic variable during the lifespan of the repository. Heating causes expansion of the rock close to the repository and, at the same time, contraction close to the surface. During the cooling phase of the repository, the opposite takes place. Heating and cooling together with the, virgin stress can induce shear dilation of fractures and deformation zones and change the flow field around the repository. The objectives of this work are to examine the contribution of thermal stress to the shear slip of fracture in mid- and far-field around a KBS-3 type of repository and to investigate the effect of evolution of stress on the rock mass permeability. In the first part of this study, zones of fracture shear slip were examined by conducting a three-dimensional, thermo-mechanical analysis of a spent fuel repository model in the size of 2 km $\times$ 2 km $\times$ 800 m. Stress evolutions of importance for fracture shear slip are: (1) comparatively high horizontal compressive thermal stress at the repository level, (2) generation of vertical tensile thermal stress right above the repository, (3) horizontal tensile stress near the surface, which can induce tensile failure, and generation of shear stresses at the comers of the repository. In the second part of the study, fracture data from Forsmark, Sweden is used to establish fracture network models (DFN). Stress paths obtained from the thermo-mechanical analysis were used as boundary conditions in DFN-DEM (Discrete Element Method) analysis of six DFN models at the repository level. Increases of permeability up to a factor of four were observed during thermal loading history and shear dilation of fractures was not recovered after cooling of the repository. An understanding of the stress path and potential areas of slip induced shear dilation and related permeability changes during the lifetime of a repository for spent nuclear fuel is of utmost importance for analysing long-term safety. The result of this study will assist in identifying critical areas around a repository where fracture shear slip is likely to develop. The presentation also includes a brief introduction to the ongoing site investigation on two candidate sites for geological repository in Sweden.

• Archives of Pharmacal Research
• /
• 제28권5호
• /
• pp.604-611
• /
• 2005

Polyethylene glycol (PEG) 6000-based solid dispersions (SDs), by incorporating various pharmaceutical excipients or microemulsion systems, were prepared using a fusion method, t o compare the dissolution rates and bioavailabilities in rats. The amorphous structure of the drug in SDs was also characterized by powder X-ray diffractometry (XRD) and differential scanning calorimetry (DSC). The ketoconazole (KT), as an antifungal agent, was selected as a model drug. The dissolution rate of KT increased when solubilizing excipients were incorporated into the PEG-based SDs. When hydrophilic and lipophilic excipients were combined and incorporated into PEG-based SDs, a remarkable enhancement of the dissolution rate was observed. The PEG-based SDs, incorporating a self microemulsifying drug delivery system (SMEDDS) or microemulsion (ME), were also useful at improving the dissolution rate by forming a microemulsion or dispersible particles within the aqueous medium. However, due to the limited solubilization capacity, these PEG-based SDs showed dissolution rates, below 50% in this study, under sink conditions. The PEG-based SD, with no pharmaceutical excipients incorporated, increased the maximum plasma concentration (C$_{max}$) and area under the plasma concentration curve (AUC$_{0-6h}$) two-fold compared to the drug only. The bioavailability was more pronounced in the cases of solubilizing and microemulsifying PEG-based SDs. The thermograms of the PEG-based SDs showed the characteristic peak of the carrier matrix around 60$^{\circ}C$, without a drug peak, indicating that the drug had changed into an amorphous structure. The diffraction pattern of the pure drug showed the drug to be highly crystalline in nature, as indicated by numerous distinctive peaks. The lack of the numerous distinctive peaks of the drug in the PEG-based SDs demonstrated that a high concentration of the drug molecules was dissolved in the solid-state carrier matrix of the amorphous structure. The utilization of oils, fatty acid and surfactant, or their mixtures, in PEG-based SD could be a useful tool to enhance the dissolution and bioavailability of poorly water-soluble drugs by forming solubilizing and microemulsifying systems when exposed to gastrointestinal fluid.

• 한국해안·해양공학회논문집
• /
• 제29권2호
• /
• pp.92-108
• /
• 2017

본 연구에서는 Navier-Stokes solver에 기초한 3차원혼상류해석법인 TWOPM-3D를 적용하여 고립파와 연안교량과의 상호작용을 수치해석적으로 수행하였다. 이 때, 고립파는 수치파동수로에서 수치조파되었고, 작용파력의 타당성은 본 수치해석결과와 기존의 실험결과와의 비교 분석으로부터 검증되었다. 이로부터 고립파의 파고, 교량의 종류와 위치 및 거더 수 등의 변화에 따른 수위변화와 유속변화를 포함하여 수평파력과 연직파력(연직상방파력과 연직하방파력)의 변동특성을 면밀히 검토하였다. 거더교의 경우 입사파고의 증가에 따라 수평파력과 연직파력의 각 최대치는 증가하는 경향을 나타낸 반면, 거더 수의 변화에 따라서는 서로 상이한 변동특성을 나타내었으며, 연직파력에 수중에 연행되는 공기가 큰 영향을 미치는 것 등을 결과로부터 알 수 있었다.

• 한국산학기술학회논문지
• /
• 제17권5호
• /
• pp.346-353
• /
• 2016

일부 연구용 원자로의 설계조건상 사이펀 현상은 배관 파단 사고 시 수조수의 지속적인 방출을 유발할 수 있다. 사이펀 차단기는 이러한 현상을 효과적으로 제한하기 위한 안전장치로, 유체역학적인 특성상 사이펀 차단 현상 해석을 위해 고려해야 할 변수가 많고 계산이 복잡하다. 이에 사이펀 차단 현상을 쉽게 분석할 수 있는 프로그램을 개발하게 되었다. 윈도우8 운영체제에서 비쥬얼 스튜디오 2012를 이용하여 MFC프로그래밍으로 개발되었으며, 사용자가 쉽게 사용할 수 있도록 GUI형식으로 개발되었다. 개발된 프로그램은 사용자가 입력한 값으로부터 유체역학적 관계식을 통해 3단계의 연산과정을 거쳐 시뮬레이션을 진행한다. 베르누이 방정식으로부터 유속과 유량을 구하여 수위, 언더슈팅, 압력, 손실계수, 그리고 이상 유동과 관계된 값들을 연산한다. 프로그램에 적용된 이상유동 해석모델은 Chisholm 모델이며, 실제와 유사하게 시뮬레이션이 가능함을 확인하였다. 시뮬레이션 결과는 그래프를 통해 나타나기 때문에 사용자는 전체적인 차단 현상을 쉽게 파악하는 것이 가능하며, 시뮬레이션 데이터의 저장 또한 가능하다. 따라서 사용자는 사이펀 차단기 시뮬레이션 프로그램의 사용을 통해 사이펀 차단 현상을 쉽게 확인할 수 있으며, 사이펀 차단기의 실제 설계에도 이용할 수 있을 것으로 기대된다.

• Wind and Structures
• /
• 제34권1호
• /
• pp.127-136
• /
• 2022

In this work a multi-fidelity non-intrusive polynomial chaos (MF-NIPC) has been applied to a structural wind engineering problem in architectural design for the first time. In architectural design it is important to design structures that are safe in a range of wind directions and speeds. For this reason, the computational models used to design buildings and bridges must account for the uncertainties associated with the interaction between the structure and wind. In order to use the numerical simulations for the design, the numerical models must be validated by experi-mental data, and uncertainties contained in the experiments should also be taken into account. Uncertainty Quantifi-cation has been increasingly used for CFD simulations to consider such uncertainties. Typically, CFD simulations are computationally expensive, motivating the increased interest in multi-fidelity methods due to their ability to lev-erage limited data sets of high-fidelity data with evaluations of more computationally inexpensive models. Previous-ly, the multi-fidelity framework has been applied to CFD simulations for the purposes of optimization, rather than for the statistical assessment of candidate design. In this paper MF-NIPC method is applied to flow around a rectan-gular 5:1 cylinder, which has been thoroughly investigated for architectural design. The purpose of UQ is validation of numerical simulation results with experimental data, therefore the radius of curvature of the rectangular cylinder corners and the angle of attack are considered to be random variables, which are known to contain uncertainties when wind tunnel tests are carried out. Computational Fluid Dynamics (CFD) simulations are solved by a solver that employs the Finite Element Method (FEM) for two turbulence modeling approaches of the incompressible Navier-Stokes equations: Unsteady Reynolds Averaged Navier Stokes (URANS) and the Large Eddy simulation (LES). The results of the uncertainty analysis with CFD are compared to experimental data in terms of time-averaged pressure coefficients and bulk parameters. In addition, the accuracy and efficiency of the multi-fidelity framework is demonstrated through a comparison with the results of the high-fidelity model.

• Advances in aircraft and spacecraft science
• /
• 제9권5호
• /
• pp.415-431
• /
• 2022

Secondary flows have a huge impact on losses generation in modern low pressure gas turbines (LPTs). At design point, the interaction of the blade profile with the end-wall boundary layer is responsible for up to 40% of total losses. Therefore, predicting accurately the end-wall flow field in a LPT is extremely important in the industrial design phase. Since the inlet boundary layer profile is one of the factors which most affects the evolution of secondary flows, the first main objective of the present work is to investigate the impact of two different inlet conditions on the end-wall flow field of the T106A, a well known LPT cascade. The first condition, labeled in the paper as C1, is represented by uniform conditions at the inlet plane and the second, C2, by a flow characterized by a defined inlet boundary layer profile. The code used for the simulations is based on the Discontinuous Galerkin (DG) formulation and solves the Reynolds-averaged Navier-Stokes (RANS) equations coupled with the Spalart Allmaras turbulence model. Secondly, this work aims at estimating the influence of viscosity and turbulence on the T106A end-wall flow field. In order to do so, RANS results are compared with those obtained from an inviscid simulation with a prescribed inlet total pressure profile, which mimics a boundary layer. A comparison between C1 and C2 results highlights an influence of secondary flows on the flow field up to a significant distance from the end-wall. In particular, the C2 end-wall flow field appears to be characterized by greater over turning and under turning angles and higher total pressure losses. Furthermore, the C2 simulated flow field shows good agreement with experimental and numerical data available in literature. The C2 and inviscid Euler computed flow fields, although globally comparable, present evident differences. The cascade passage simulated with inviscid flow is mainly dominated by a single large and homogeneous vortex structure, less stretched in the spanwise direction and closer to the end-wall than vortical structures computed by compressible flow simulation. It is reasonable, then, asserting that for the chosen test case a great part of the secondary flows details is strongly dependent on viscous phenomena and turbulence.