• 제목/요약/키워드: Two-dimensional Packing

검색결과 33건 처리시간 0.022초

반구형 플라스틱 구조체 성형을 위한 프리폼 몰드 사출성형공정 최적화 (Optimization of preform mold injection molding process for hemispheric plastic structure fabrication)

  • 박정연;고영배;김동언;하석재;윤길상
    • Design & Manufacturing
    • /
    • 제13권2호
    • /
    • pp.30-36
    • /
    • 2019
  • Traditional cell culture(2-dimensional) is the method that provide a nutrient and environment on a flat surface to cultivate cells into a single layer. Since the cell characteristics of 2D culture method is different from the characteristics of the cells cultured in the body, attempts to cultivate the cells in an environment similar to the body environment are actively proceeding in the industry, academy, and research institutes. In this study, we will develop a technology to fabricate micro-structures capable of culturing cells on surfaces with various curvatures, surface shapes, and characteristics. In order to fabricate the hemispheric plastic structure(thickness $50{\mu}m$), plastic preform mold (hereinafter as "preform mold") corresponding to the hemisphere was first prepared by injection molding in order to fabricate a two - layer structure to be combined with a flat plastic film. Then, thermoplastic polymer dissolved in an organic solvent was solidified on a preform mold. As a preliminary study, we proposed injection molding conditions that can minimize X/Y/Z axis deflection value. The effects of the following conditions on the preform mold were analyzed through injection molding CAE, [(1) coolant inlet temperature, (2) injection time, (3) packing pressure, (4) volume-pressure (V/P). As a result, the injection molding process conditions (cooling water inlet temperature, injection time, holding pressure condition (V / P conversion point and holding pressure size)) which can minimize the deformation amount of the preform mold were derived through CAE without applying the experimental design method. Also, the derived injection molding process conditions were applied during actual injection molding and the degree of deformation of the formed preform mold was compared with the analysis results. It is expected that plastic film having various shapes in addition to hemispherical shape using the preform mold produced through this study will be useful for the molding preform molding technology and cast molding technology.

설비공학 분야의 최근 연구 동향 : 2016년 학회지 논문에 대한 종합적 고찰 (Recent Progress in Air-Conditioning and Refrigeration Research : A Review of Papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2016)

  • 이대영;김사량;김현정;김동선;박준석;임병찬
    • 설비공학논문집
    • /
    • 제29권6호
    • /
    • pp.327-340
    • /
    • 2017
  • This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2016. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of flow, heat and mass transfer, the reduction of pollutant exhaust gas, cooling and heating, the renewable energy system and the flow around buildings. CFD schemes were used more for all research areas. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results of the long-term performance variation of the plate-type enthalpy exchange element made of paper, design optimization of an extruded-type cooling structure for reducing the weight of LED street lights, and hot plate welding of thermoplastic elastomer packing. In the area of pool boiling and condensing, the heat transfer characteristics of a finned-tube heat exchanger in a PCM (phase change material) thermal energy storage system, influence of flow boiling heat transfer on fouling phenomenon in nanofluids, and PCM at the simultaneous charging and discharging condition were studied. In the area of industrial heat exchangers, one-dimensional flow network model and porous-media model, and R245fa in a plate-shell heat exchanger were studied. (3) Various studies were published in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, subjects include mobile cold storage heat exchanger, compressor reliability, indirect refrigeration system with $CO_2$ as secondary fluid, heat pump for fuel-cell vehicle, heat recovery from hybrid drier and heat exchangers with two-port and flat tubes. In the alternative refrigeration/energy system category, subjects include membrane module for dehumidification refrigeration, desiccant-assisted low-temperature drying, regenerative evaporative cooler and ejector-assisted multi-stage evaporation. In the system control category, subjects include multi-refrigeration system control, emergency cooling of data center and variable-speed compressor control. (4) In building mechanical system research fields, fifteenth studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, renewable energies, etc. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which could be help for improving the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the analyses of indoor thermal environments controlled by portable cooler, the effects of outdoor wind pressure in airflow at high-rise buildings, window air tightness related to the filling piece shapes, stack effect in core type's office building and the development of a movable drawer-type light shelf with adjustable depth of the reflector. The subjects of building energy were worked on the energy consumption analysis in office building, the prediction of exit air temperature of horizontal geothermal heat exchanger, LS-SVM based modeling of hot water supply load for district heating system, the energy saving effect of ERV system using night purge control method and the effect of strengthened insulation level to the building heating and cooling load.

의류 인터넷 쇼핑몰에서 브랜드를 고려한 상품 입고 및 재배치 방법 연구 (An Efficient Heuristic for Storage Location Assignment and Reallocation for Products of Different Brands at Internet Shopping Malls for Clothing)

  • 송용욱;안병혁
    • 지능정보연구
    • /
    • 제16권2호
    • /
    • pp.129-141
    • /
    • 2010
  • 의류 인터넷 쇼핑몰들은 판매 상품의 포장과 배송을 위한 상품 창고를 운영하고 있다. 상품들은 동일 브랜드끼리 상자에 담긴 후 선반에 일렬로 보관된다. 상품의 반출 및 상품 관리의 편의상, 상자들은 동일 브랜드끼리 묶여져 선반에 진열되어 있어야 한다. 따라서, 새로운 상품들이 입고될 경우 상품들은 동일 브랜드끼리 상자에 담긴 후 선반 위에 있는 기존 상자들 중에서 동일 브랜드의 상자 옆에 배치되어야 한다. 그런데, 선반 위의 빈 곳이 새로 입고되는 상자를 넣을 수 있을 만큼 충분하지 않다면, 옆의 다른 브랜드의 상자들을 옆으로 밀어서 공간을 확보한 후 새로운 상자를 배치함으로써 동일 브랜드 상자끼리 붙어있도록 해야 한다. 우리의 문제는 이와 같이 새로운 상품을 입고할 때 동일 브랜드의 상자들끼리 붙어 있도록 하면서 다른 브랜드의 상자를 옆으로 옮길 경우, 그 횟수를 최소화하는 것이다. 이 문제의 최적해를 구하기 위해서 우리는 이 문제를 우선 정수계획법으로 모형화하였다. 그런데, 정수계획법 문제는 분기한정법(Branch and Bound) 기법으로 해결하여야 하나, 그 경우 문제해결 시간이 너무 오래 걸리는 문제가 발생한다. 따라서, 본 연구에서는 위 재배치 문제를 할당 문제(Assignment Problem)로 완화하여 모형화함으로써 만족할만한 준최적해를 구하는 방법론을 제시하고, 실험에 의하여 그 타당성을 검토하였다. 또한, 이 방법론 하에서 실제 의류 인터넷 쇼핑몰의 컴퓨팅 환경을 고려할 때 해결 가능한 문제의 최대 크기를 도출하고, 그 크기 이내에서 입고 계획을 생성하는 시스템을 구현하였다.