• 태양에너지
• /
• 제19권3호
• /
• pp.63-73
• /
• 1999

Ice storage systems are used to shift the peak load in day time into night time in summer. This paper describes a system simulation of partial ice storage system composed of an encapsulated ice storage tank, a screw compressor chiller, a heat exchanger, and a brine pump. For the system simulation, a one-dimensional model of ice storage tank is developed and validated by comparison with the performance data from measurements of an ice storage tank installed at a building. The control strategies considered in this study are chiller priority and storage priority being used commercially. The system is simulated with design cooling load of 600 RT peak load in design day and with off-design day cooling load, and the electric energy costs of the two control strategies for the same system size are compared. As a result of calculation, the energy consumption in a week for storage priority is higher than that for chiller priority control. However due to lower cost of night electric charge rate, energy cost for storage priority control is lower than chiller priority.

• 전기학회논문지
• /
• 제58권2호
• /
• pp.407-414
• /
• 2009

The foundation fieldbus(FF) is one of the fieldbuses most widely used for process control and automation, In order for system designer to optimize medium management, it is imperative to predict transmission delay time of data. In a former research, mathematical modeling to analyze transmission delay of FF token-passing system has been developed based on the assumption that a device node has only one priority data(1Q model), From 1Q model, all of the device nodes, which are connected on the FF system, are defined priority level in advance, and as system operates, data are generated based on given priority level. However, in practice, some non-periodic data can have different priority levels from one device. Therefore, new mathematical model is necessary for the case where different priority levels of data are created under one device node(2Q model). In this research, the mathematical model for 2Q model is developed using the equivalent queue model. Furthermore, the characteristics of transmission delay of 2Q model which is presented in this paper were compared with 1Q model. The validity of the analytical model was verified by using a simulation experiment.

• 전자공학회논문지CI
• /
• 제45권5호
• /
• pp.125-133
• /
• 2008

본 논문은 다양한 서비스 클래스가 제공되는 BcN (Broadband convergence Network) 환경에서 상위 우선순위 서비스의 품질을 보장하기 위한 능동 큐 관리 메커니즘 (Active-WRED)을 제안한다. 네트워크 혼잡 상황에서 제안된 메커니즘은 상대적으로 낮은 우선순위를 갖는 서비스의 drop 확률을 증가시키고 이에 따라 상위 우선순위 서비스의 drop 확률을 감소시킴으로써 상위 우선순위 서비스에 대해 패킷 손실로부터 품질을 보장할 수 있다. 제안된 능동 큐 관리 메커니즘의 성능을 분석하기 위해 이산 시간 큐잉 시스템의 통계적 분석 방법을 도입하였다. 두 서비스 클래스 (GS: Guaranteed Service, BS: Best Effort Service)만을 고려하여 제안 방안의 성능 분석을 위해 MMBP-2 (two-state Markov-Modulated Bernoulli arrival Process) 트래픽 소스 모델과 2차 이산시간 Markov 체인을 도입하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.687-690
• /
• 2003

This paper presents the development of Programmable Logic Controller (PLC) and network to design the redundant control system in order to control the high priority process. The industrial process that cannot be shutdown or the effect of the shutting down takes abundantly damage. In this article, we say that the high priority process. The redundant systems are designed for controlling the high priority process that the control system must have many controllers to instead the main controller when it has some error. This paper we designed the redundancy control system by the advantage of the high-speed communication on the PLC’s network. The temperature control system and the traffic light control system used as the case study. Each example processes consist of two sets of controller. Our scheme we can increase the reliability prevents process down time and reduces the cost of opportunity to loss also.

• 한국통신학회논문지
• /
• 제19권3호
• /
• pp.492-504
• /
• 1994

ATM 네트워크에서 대역폭의 효율적인 사용을 위한 두개의 QOS 베어러서비스의 실현으로 여러 가지 우선권 할당 버퍼접근 메카니즘이 제안되고 있다. 본 논문은 익스플리싯(explicit) 우선권 할당메카니즘의 3상태 이산 시간 마코프 프로세스를 갖는 성능 모델을 제안하고 셀 손실률을 해석적으로 유도한다. EH한 부분 버퍼 공유 방법을 사용하는 보다 유연성있는 공간 우선권 제어 메카니즘을 소스의 버스트니스와 셀 손실률만에서 연구하고 시뮬레이션으로 검증한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.246-248
• /
• 2005

The Controller Area Network (CAN) is being widely used for real-time control application and small-scale distributed computer controller systems. However, CAN may exhibit unfair behavior under heavy traffic conditions. When there are both high and low priority messages ready for transmission, the proposed precedence priority filtering method allows one low priority message to be exchanged between any two adjacent higher priority messages. In this way, the length of each transmission delays is upper bounded. These procedures are implemented as local controllers for the ISHURO (Inha Semyung Humanoid RObot).

• 한국통신학회논문지
• /
• 제23권9A호
• /
• pp.2249-2257
• /
• 1998

In this paper, we propose the enhanced priority control algorithm that adaptively controls the cell service ratio according to the relative cell occupancy ratio of buffer. The asynchronous transfer mode (ATM) provides the means to support various multimedia services in broadband networks. To support multimedia services, various data traffics of different priorities should be controlled effectively. And also it needs congestion control functions required in the netowrk to carry out the control operation. To accomplish this in a flexible and effective manner, priority classes for the different services ar ecommonly used. The proposed enhanced priority control mechanism have two service calsses of the delay sensitive class and the loss sensitive class. The simulation results show that te proposed control mechanism improves the QoS, the charateristics of cell loss probability and mean cell delay time, by selecting propeor relativ ecell occupancy ratio of buffer and the average arrival rate.

• Journal of Communications and Networks
• /
• 제14권6호
• /
• pp.692-702
• /
• 2012

Supporting quality of service (QoS) guarantees for diverse multimedia services are the primary concerns for WiMAX (IEEE 802.16) networks. A scheduling scheme that satisfies QoS requirements has become more important for wireless communications. We propose a downlink scheduling scheme called adaptive priority-based downlink scheduling (APDS) for providing QoS guarantees in IEEE 802.16 networks. APDS comprises two major components: Priority assignment and resource allocation. Different service-type connections primarily depend on their QoS requirements to adjust priority assignments and dispatch bandwidth resources dynamically. We consider both starvation avoidance and resource management. Simulation results show that our APDS methodology outperforms the representative scheduling approaches in QoS satisfaction and maintains fairness in starvation prevention.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1594-1597
• /
• 2002

In this paper, we proposed the IEEE 802.11 CSMA/CA protocol with the priority scheme. The IEEE 802.11 CSMA/CA protocol is the standard in wireless LAN We applied the proposed method to the aeronautical mobile telecommunication environment. The CSMA/CA protocol has two frames : one is PCF frame for real time service like voice and image and the other DCF frame for contention services like data transmission. Now we proposed the priority scheme that has the different CW region according to the transmitted data. The simmulation results shows the proposed method's performance is improved, Because the collision probability is reduced by allowing the different CW between stations. And the time dalay results show the priority scheme is very appropriated.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 추계학술대회
• /
• pp.755-757
• /
• 2009

Since the research of advanced terrestrial digital multimedia broadcasting system is still in progress, and in our previous paper, in which we introduced how to combine one conventional transmitted symbol with two additional bits to form a new symbol transmission, the bit error performance of LP bits is not realizable, because even we implemented the turbo code to protect the LP bits transmission, to obtain a certain good bit error probability, the value of $E_b/N_0$ cost highly. In this paper, we modified the composition of low-priority symbol and high-priority symbol, and through the system presented in previous paper we get a better simulation result of the LP symbol transmission.