• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2001년도 추계학술발표대회
• /
• pp.545-548
• /
• 2001

Microbiologically influenced corrosion (MIC) of metal is common in the natural environment and sulfate reducing bacteria are representative microorganisms for MIC. We found that biofilm fomlation by SRB on the metal surface might be controlled by quorum sensing, which is a cell density dependent regulation of cell metabolism. As cell free culture fluids (spent media) of Desulfovibrio vulgaris and D. desulfuricans were tested for quontrn sensing related test strains, it was found that spent media of two SRB induced increased luminescence of Vibrio harveyi BB886 (sensor 1+, sensor 2-) and BB170 (sensor 1-, sensor 2+). Quorum activities of D. vulgaris and D. desulfuricans appeared to be parallel to growth patterns, i.e., it was low in the lag phase, highly increased in the exponential phase, and reached maximum in the stationary phase. Interestingly, however, luminescence of V. harveyi BB886 and BB170 induced by a unit cell mass of the SHB showed a maximal peak in the late lag phase. Hence, it was suspected that quorum sensing of these two SHB play unknown roles in shifting cells from dormant to growth stages.

• 대한기계학회논문집
• /
• 제12권4호
• /
• pp.825-832
• /
• 1988

본 연구에서는 1차원 열흐름하에서 상부가 가열된 다공물질내의 열파이프 현 상과 관련하여 2상영역의 존재와 그 길이에 영향을 미치는 인자들을 실험적으로 관찰, 조사하였다.

• Nuclear Engineering and Technology
• /
• 제49권1호
• /
• pp.92-102
• /
• 2017

The analysis of steam generators as an interface between primary and secondary circuits in light water nuclear power plants is crucial in terms of safety and design issues. VVER-1000 nuclear power plants use horizontal steam generators which demand a detailed thermal hydraulics investigation in order to predict their behavior during normal and transient operational conditions. Two phase flow field simulation on adjacent tube bundles is important in obtaining logical numerical results. However, the complexity of the tube bundles, due to geometry and arrangement, makes it complicated. Employment of porous media is suggested to simplify numerical modeling. This study presents the use of porous media to simulate the tube bundles within a general-purpose computational fluid dynamics code. Solved governing equations are generalized phase continuity, momentum, and energy equations. Boundary conditions, as one of the main challenges in this numerical analysis, are optimized. The model has been verified and tuned by simple two-dimensional geometry. It is shown that the obtained vapor volume fraction near the cold and hot collectors predict the experimental results more accurately than in previous studies.

• Nuclear Engineering and Technology
• /
• 제46권5호
• /
• pp.655-666
• /
• 2014

The CUPID code has been developed at KAERI for a transient, three-dimensional analysis of a two-phase flow in light water nuclear reactor components. It can provide both a component-scale and a CFD-scale simulation by using a porous media or an open media model for a two-phase flow. In this paper, recent advances in the CUPID code are presented in three sections. First, the domain decomposition parallel method implemented in the CUPID code is described with the parallel efficiency test for multiple processors. Then, the coupling of CUPID-MARS via heat structure is introduced, where CUPID has been coupled with a system-scale thermal-hydraulics code, MARS, through the heat structure. The coupled code has been applied to a multi-scale thermal-hydraulic analysis of a pool mixing test. Finally, CUPID-SG is developed for analyzing two-phase flows in PWR steam generators. Physical models and validation results of CUPID-SG are discussed.

• Nuclear Engineering and Technology
• /
• 제55권12호
• /
• pp.4561-4569
• /
• 2023

A correct understanding of vibration-based degradation is crucial from the standpoint of maintenance for Steam Generators (SG) as crucial mechanical equipment in nuclear power plants. This study has established a novel approach to developing a model for investigating tube bundle degradation according to crack growth caused by two-phase Flow-Induced Vibration (FIV). An important step in the approach is to calculate the two-phase flow field parameters between the SG tube bundles in various zones using the porous media model to determine the velocity and vapor volume fraction. Afterward, to determine the vibration properties of the tube bundles, the Fluid-Solid Interaction (FSI) analysis is performed in eighteen thermal-hydraulic zones. Tube bundle degradation based on crack growth using the sixteen most probable initial cracks and within each SG thermal-hydraulic zone is performed to calculate useful lifetime. Large Eddy Simulation (LES) model, Paris law, and Wiener process model are considered to model the turbulent crossflow around the tube bundles, simulation of elliptical crack growth due to the vibration characteristics, and estimation of SG tube bundles degradation, respectively. The analysis shows that the tube deforms most noticeably in the zone with the highest velocity. As a result, cracks propagate more quickly in the tube with a higher height. In all simulations based on different initial crack sizes, it was observed that zone 16 experiences the greatest deformation and, subsequently, the fastest degradation, with a velocity and vapor volume fraction of 0.5 m/s and 0.4, respectively.

• Composite Materials and Engineering
• /
• 제3권3호
• /
• pp.241-262
• /
• 2021

In this article, we studied the effect of two-temperature in a two-dimensional orthotropic thermoelastic media with fractional order heat transfer in generalized thermoelasticity with three-phase-lags due to thermomechanical sources. The boundary of the surface is subjected to linearly distributed and concentrated loads (mechanical and thermal source). The solution of the problem is obtained with the help of Laplace and Fourier transform techniques. The expressions for displacement components, stress components and conductive temperature are derived in transformed domain. Numerical inversion technique is used to obtain the results in physical domain. The effect of two-temperature on all the physical quantities has been depicted with the help graphs. Some special cases are also discussed in the present investigation.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.241-246
• /
• 2000

Gas hydrates are solid solutions when water molecules are linked through hydrogen bondin create host lattice cavities that can enclose a large variety of guest gas molecules. The natural hydrate crystal may exist at low temperature above the normal freezing point of water and pressure greater than about 30 bars. A lot of quantities of natural gas hydrates exists in the ear many production schemes are being studied. In the present investigation, depressurization method considered to predict the production of gas and the simulation of the two phase flow - gas and - in porous media is being carried out. The simulation show about the fluid flow in porous have a variety of applications in industry. Results provide the appearance of gas and water prod the pressure profile, the saturation of gas/ water/ hydrates profiles and the location of the pl front.

• Advances in materials Research
• /
• 제12권3호
• /
• pp.211-226
• /
• 2023

The present work is considered to study the two-dimensional problem in an orthotropic magneto-thermoelastic media and examined the effect of thermal phase-lags and GN-theories on Rayleigh waves in the light of fractional order theory with combined effect of rotation and hall current. The boundary conditions are used to derive the secular equations of Rayleigh waves. The wave properties such as phase velocity, attenuation coefficient are computed numerically. The numerical simulated results are presented graphically to show the effect of phase-lags and GN-theories on the Rayleigh wave phase velocity, attenuation coefficient, stress components and temperature change. Some particular cases are also discussed in the present investigation.

• 한국지반공학회지:지반
• /
• 제13권1호
• /
• pp.5-18
• /
• 1997

일반적으로 포화지반의 동적거동을 정확히 예편하기 위해서는 다공성(multi-phase) 재료모델과 그 모델을 이용하는 수치해석 프로그램의 개발이 필요하다. 본 논문에서는 높은 동하중을 받는 다공질 재료의 이론적인 거동해석 연구결과와 함께 기존 MPDAP(multi-phase dynamic analysis program)에 JWL(Jones-Withins-Lee) 모델을 삽입시켜 개발한 MPDAP에 대해 다루었다. JWL모델은 기존 모델과는 달리 폭약의 종류 및 특성 등을 고려할 수 있는 모델이다. 또한 본 논문에서는 개발된 프로그램의 적합성을 조사하기 위하여 몇몇 예제에 대한 검증해석을 수행하였다. 검증결과, 단일매체 (single-phase medium)에서의 탄성구형파의 전파특성 해석의 경우 해석결과와 이론해는 거의 일치하는 결과를 나타내었고, 일차원 선형 압밀해석의 경우과잉 간극수압은 Terzaghi의 이론해와 해석된 결과가 비교적 일치하는 경향성을 보여 주었다. 또한 포화지반에서의 평면 압축파 해석의 경우도 해석결과와 이미 검증된 프로그램 또는 완전해의 해석결과는 거의 유사하게 나타나는 것을 알 수 있었다.

• 한국세라믹학회지
• /
• 제30권1호
• /
• pp.78-84
• /
• 1993

In PMN-pyrochlore phase mixtures, dielectric constant was measured as a function of the volume fraction of pyrochlore phase and considered with general effective media(GEM) equation. For the application of GEM equation to this system, the critical volume fraction(Vc) where connectivity between the perovskite PMN and pyrochlore phase changed from 0-3 to 3-3, was determined based on the each particle size ratio of two phases with microstructural observation. And then the t value was determined from modified percolation powder-law dependence ( K-Kc (V-Vc)t). In the case of applying such values of t and Vc to the GEM equation, which provided a reasonable fit to the measured dielectric constant within the experimental error range.