• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1613-1616
• /
• 2005

In this paper, we developed an algorithm of generating cam contour curve for hinge mechanism of folder-type mobile phone. The main feature of this hinge mechanism is that we can operate uniform torque to open or close the mobile phone. We divided the opening or closing intervals of the cam into finite sub-intervals, and then we determined the cam contour curve of each sub-interval as a parabolic curve. Finally, these finite parabolic curves form the total cam contour. We can design single cam, which composed moving cam with contour curve and fixed cam that plays only roller, and twin cam with contour curve that is made up the pair of two cams symmetrically.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.9
• /
• pp.125-132
• /
• 2002

We use a compound-cam twin arm structure and random tool access method to achieve a faster ATC (Automatic Tool Changer) system for the accurate position and rotation control of a tool magazine and an exchange am. Based on the data obtained from various sensors, it is possible to follow the sequence of commands in each control step for an exchange arm. However, it is not so easy to reduce the exchange time of the system because of the slow responses of the sensors and execution mode delays of PLC (Programmable Logic Controller) scan time. In this paper, we propose a new programmed limit-switch position control method to obtain the shortest possible delays for the random tool access method and compound-cam twin arm structure. With some experimental results, we have achieved below 0.9sec tool exchange time with the proposed method.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.3
• /
• pp.291-297
• /
• 2016

Patients with $Sj{\ddot{o}}gren^{\prime}s$ syndrome usually suffer from teeth discoloration and attrition due to xerostomia. If the anterior teeth are badly worn, problems such as loss of anterior guidance, occlusal disharmony, and limited space for restoration may occur. However, ideal occlusion is obtained in both centric and eccentric relation by regaining the disocclusion of the posterior teeth through the anterior and lateral guidance using twin-stage method. In this case, rehabilitation was performed for a $Sj{\ddot{o}}gren^{\prime}s$ syndrome patient with maxillary and mandibular incisor's severe attrition and teeth discoloration by using twin-stage method.

• Journal of the Korean Solar Energy Society
• /
• v.33 no.3
• /
• pp.36-41
• /
• 2013

The reflection plate in twin-glass evacuated tube solar collector is controlled to reduce the overheat during the summer time. The sliding type and folding types are suggested and tested. The sliding type changes the plate angle and the folding type changes the opening angle of the reflection plate. By scattering the focus of the reflected radiation from the reflection plate, the temperature rise of the working fluid can be reduced. The sliding type shows the best results in overheat reduction. When solar radiation is 900 $W/m^2$, the temperature rise in one sliding type collector is reduced about $2^{\circ}C$ compared to that of the normal solar collector. When this method is applied to seven series-collectors in the field, the reduction of temperature rise during the summer time should be significant.