• 한국운동역학회지
• /
• 제16권2호
• /
• pp.65-73
• /
• 2006

The aim of this study was to find out the differences of Kinematics factors from touching down the vaulting board to landing when techniques of 1/1Turn and Tucked were performed on the old vaulting horse and on the new vaulting table. Three national representative men gymnasts were sampled for this study. Three dimension motion analyses by means of six Sony PD-150 video cameras with the velocity of 60 fps were used As a result of analyzing the kinematic data from two kind of vaulting table, the following conclusions were made. 1. The performing time from taking off the vaulting horse to landing(phase 4) in the 1/1 Turn technique on the new vaulting table was significantly longer than that of the old vaulting horse, while the time from contacting to taking off the vaulting horse on the new vaulting table was shorter than that of the old vaulting horse in both and the Tucked techniques. 2. The vertical release COG velocity was faster on the new vaulting table compare to the old vaulting horse in the all kind technique. However the horizontal release COG velocity of the 1/1 Turn technique was faster a little in the old vaulting horse compare to the new vaulting table.

• 한국운동역학회지
• /
• 제16권4호
• /
• pp.135-145
• /
• 2006

The aim of this study was to find out the differences of biomechanical factors from touching down the vaulting board to landing when techniques of 1/1Turn, stretched, and Tucked were performed on the old vaulting horse and on the new vaulting table. Three national representative men gymnasts were sampled for this study. Three dimension motion analyses by means of six Sony PD-150 video cameras with the velocity of 60 fps were used. As a result of analyzing the kinetic data from two kind of vaulting table, the following conclusions were made. 1. There was not significant differences of angular momentum between the old and the new vaulting table in all three techniques except the phase of stepping on the vaulting board and contacting the vaulting horse in the Tucked technique. IN the two phases above, the angular momentum in the new vaulting table was greater than that of the old vaulting horse. 2. There were few significant differences between the old and the new vaulting horses in the horizontal and vertical reaction force according to techniques when stepping was performed. However, it appeared tendency that the horizontal and vertical reaction force in the new vaulting table was a little greater than that of the old vaulting horse when the 1/1Turn, the Stretched and the Tucked were performed.

• Journal of Power Electronics
• /
• 제7권1호
• /
• pp.81-88
• /
• 2007

This paper presents a new approach to the automatic control of the turn-off angle used to excite the Switched Reluctance Motor (SRM) employed in electric vehicles (EV). The controller selects the turn-off angle that supports and improves the performance of the motor drive system. This control scheme consisting of classical current control and speed control depends on a lookup table to take the best result of the motor. The turn-on angle of the main switches of the inverter is fixed at $0^{\circ}C$ and the turn-off angle is variable depending on the reference speed. The motor, inverter and control system are modeled in Simulink to demonstrate the operation of the system.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.378-382
• /
• 2004

A study was performed for verification of creation mechanism of turn down mark in thick plate. The roll mark was produced by plate bending when the front of plate was collided with roller table rolls. Various process conditions which are temperatur distribution along the thickness direction of plate, pass line, and reduction ration were investicated. These process conditions affected the amount of plate bending and were a major cause of turn down mark.

• Journal of Power Electronics
• /
• 제18권3호
• /
• pp.681-693
• /
• 2018

This paper proposes a soft-switching bidirectional dc-dc converter (BDC) with an auxiliary circuit. The proposed BDC can achieve the zero-voltage switching (ZVS) using an auxiliary circuit in the buck and boost operations. The auxiliary circuit supplies optimal energy for the ZVS operation of the main switches. The auxiliary circuit consists of a resonant inductor, a back-to-back switch and two capacitors. A small-sized resonant inductor and an auxiliary switch with a low-rated voltage can be used in the auxiliary circuit. Zero-current switching (ZCS) turn-on and turn-off of the auxiliary switches are possible. The proposed soft-switching scheme has a look-up table for optimal switching of the auxiliary switches. The proposed strategy properly adjusts the turn-on time of the auxiliary switch according to the load current. The proposed BDC is verified by the results of PSIM simulations and experiments on a 3-kW ZVS BDC system.

• 한국전자파학회논문지
• /
• 제14권1호
• /
• pp.8-13
• /
• 2003

본 논문에서는 이동통신 품질 보호를 위한 주파수 1 GHz CISPR 허용기준 설정의 적정성을 조사하였으며, 주파수 1 GHz 이상의 장해파 측정에 있어 최대값 추출의 정확성을 높이기 위해 사전 시험에 이용될 수 있는 피시험체의 최적 회전 스텝 분해능에 대해 조사하였다. 마이크로 프로세스의 클럭속도 500 MHz 및 1.7 GHz인 퍼스널 컴퓨터를 피시험체로 측정한 결과, 클럭속도 500 MHz의 경우, 미국 표준과학연구원 Koepke 방식에 의해 추출된 최적 스텝 분해능은 40 개이었으며, 클럭속도 1.7 GHz 퍼스널 컴퓨터의 경우 스텝 분해능은 36개로 평가되었다. 완전 스캔(fully scan) 방식의 측정이 요구되는 기가헤르쯔 측정에서 회전 스텝 분해능에 대한 예측은 측정의 정확성뿐만 아니라 측정 시간을 상당히 단축시켜 줄 것이다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.3180-3186
• /
• 2011

A segmented scissors type switch has been developed for the urban transit maglev demonstration line to be commercialized near Incheon International Airport in 2013. Based on the design of the previous segmented 3-way switch, the scissors switch is composed of four segmented 2-way switches up/down and left/right and a turn table in the mid point. The main function of the scissors switch is to change the running direction of the train at end terminals. The developed scissors switch is planned to be installed in front of the 102 station, which has a side platform, of the demonstration line. The total length of the switch is 65m and the distance between the up and down track centerlines is 6m. The 2-way switches and turn table are made of steel box type beams, and have their own driving unit, locking unit, control unit, levitation and propulsion rails, and so on. Installed in the factory, a 100,000-cycle continuous operation test was carried out after manual and automatic test operations. The applicapability of the developed switch was verified through the measurements of the linearity of the track after repetitive operations, the mechanical operation noise, the load of the main driving motor, the safety of the control panel, the natural frequency of the girder, the deformation of the girder, and so on.

• 드라이브 ㆍ 컨트롤
• /
• 제20권4호
• /
• pp.9-16
• /
• 2023

This paper analyzed a drainage tower used to drain water in flooded areas. Multi-body dynamics simulation was used to analyze the dynamic behavior of the drainage tower. Structural analysis, flexible-body dynamic analysis, and rigid body dynamic analysis were done to study the maximum Von-Mises stress of the drainage tower. The results showed that the maximum Von-Mises stress occurs at the turn table, and it decreases when the angle of the boom is increased. Also, the rate of the change of angle affects the maximum stress so that the maximum stress changes more when the angular velocity of the boom increases. Based on the rigid body dynamic analysis and the theoretical analysis results, the centrifugal force from the angular velocity makes the difference in the maximum stress at the turn table because of the difference in their direction. Consequently, it was concluded that the centrifugal force should be considered when designing construction machinerythat can rotate.

• 대한토목학회논문집
• /
• 제29권2D호
• /
• pp.217-225
• /
• 2009

차량의 좌회전반경 및 궤적에 관한 연구는 미비한 실정이다. 이러한 이유로 교차로의 설계시 좌회전반경은 중요하게 반영 되지 않아 부적절하게 적용된 경우를 자주 찾아볼 수가 있으며 그에 따른 좌회전 유도선 또한 부적절하게 그려지고 있는 실정이며 이러한 교차로에서 상충에 의한 안전사고나 교차로용량의 감소가 자주 일어나고 있다. 본 연구는 유럽에서 교차로 설계 시 자주 사용되며 최근 국내에 소개된 바 있는 "물방울 교통섬(Drop Island)"을 교차로의 설계에 적용하여 위와 같은 문제점들을 해결하고자 한다. 기존의 물방울 교통섬 설계방법을 응용하여 실제 설계에 활용할 수 있도록 차종별, 교차각별로 설계방법을 제시하였으며 실제 설계를 통해 각각의 경우 교차점으로부터 정지선의 위치 및 회전 궤적의 시종점거리를 제시하여 설계자가 실무에서 참고하여 보다 쉽게 정확한 좌회전 궤적을 설계에 반영할 수 있도록 하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.863_864
• /
• 2009

Design and drive characteristics of SR drive for hydraulic pump system using passive converter is presented in this paper. In oder to get the high performance, a simple passive circuit is added in the front-end of a conventional asymmetric converter, which consists of three diodes and one capacitor. This passive converter has the high demagnetization voltage, to reduce the demagnetization time. Futhermore optimal turn-off angle for the proposed passive converter is proposed. According to motor speed and current, an optimal turn-off angle can be achieved by look-up table to reduce torque ripple. The characteristic of proposed hydraulic pump system using passive converter is verified by simulation and experimental results.