• 설비공학논문집
• /
• 제4권1호
• /
• pp.20-32
• /
• 1992

A numerical solution for heat transfer in the flue tube of a pulse combustion water heater was presented. The $k-{\varepsilon}$ turbulent model was adopted to describe turbulent characteristics and radiative heat transfer was calculated by P-N approximation. Three pulsating conditions equivalent to existing experimental studies were used for analysis. Pulsating pressure was specified at the inlet and outlet of flue tube and numerical procedure using control volume method and pressure boundary condition was presented. It was found that the present mathematical model and numerical method could predict effectively the flow field and heat transfer for the flue tube in pulse combustor.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제31회 추계학술대회논문집
• /
• pp.334-337
• /
• 2008

초음속 주 유동내 연료의 수직분사에 의한 비정상 반응 유동장에 대한 3차원 수치해석이 DES 난류 모델과 상세 화학반응 모델을 이용하여 수행되었다. 난류 반응 유동의 물리적 현상을 이해하기 위하여 해석 및 실험 결과를 비교하였다. 계산에 의해 구해진 OH 분포는 실험의 OH-PLIF 결과를 잘 모사하고 있다. 반면, 점화 지연 시간은 계산과 실험 사이에 차이를 보이고 있으며, 이는 실험적 계측의 한계에 기인하는 것으로 생각된다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.787-790
• /
• 2017

본 연구는 이원추진제 추력기(thruster)에 사용되는 메탄-산소 연소특성규명의 선행연구로서 모델연소실 내 전단동축형인젝터를 통해 분사된 기체메탄-기체산소 비예혼합화염의 연소안정한계 및 화염형상을 도출하기 위한 실험적 연구가 수행되었다. DSLR 카메라를 이용하여 화염 직접이미지(direct image)를 촬영하였고, 이미지 후처리(post-processing)를 통해 연소특성파악 및 화염길이 정량화를 수행하였다. 그 결과, 산화제 레이놀즈 수($Re_o$)가 증가함에 따라 이론반응비(stoichiometric ratio)에서 안정된 화염이 발생하였고, 동일 인젝터직경 조건에서 난류화염의 길이가 늘어남을 확인하였다.

• 대한기계학회논문집
• /
• 제16권3호
• /
• pp.589-597
• /
• 1992

본 연구에서는 고압하의 분무연소에 있어서 매연생성에 대한 기초적 자료를 얻기 위해 난류 확산화염의 복잡한 디이젤 분무연소를 예혼합기에 의한 단순한 연소에 서 모델링 될 수 있는 특수 정적연소 장치를 제작했다. 이러한 정적 연소용기내의 프로판-공기 예혼합기연소를 대상으로, 주로 압력이 매연생성에 미치는 영향을 2색법 에 의한 연소가스온도측정과 더불어 4MPa까지의 넓은 압력범위에 걸쳐 조사했다.

• 한국연소학회지
• /
• 제4권1호
• /
• pp.117-129
• /
• 1999

A method for the mixing augmentation of the transverse injection of fuel in a Scramjet combustor is suggested. Based on the fact that the main factor controlling the mixing characteristics in transverse injection is the effective back-pressure (the pressure around the injection hole) it is tried to make a flow expansion near the injection port in order to reduce effective back-pressure. A three dimensional Navier-Stokes code adopting the upwind method of Roe#s flux difference splitting scheme is used. The k-w SST turbulence model turbulence model is used to calculate the turbulent viscosity. It is shown that the reducing of the effective back-pressure make it possible to increase the penetration distance and to increase the mixing rate without excessive losses of stagnation pressure. Also, it is shown that the streamwise vorticity generated by baroclinic torque has great influences on the mixing process.

• 한국분무공학회지
• /
• 제16권1호
• /
• pp.37-43
• /
• 2011

The present study conducted computational simulation for multiphase flow in the flame spray coating process with commercially available Ni-Cr powders. The flows in a flame spray gun is characterized by very complex phenomena including combustion, turbulent flows, and convective and radiative heat transfer. In this study, we used a commercial computational fluid dynamics (CFD) code of Fluent (ver. 6.3.26) to predict gas dynamics involving combustion, gas and particle temperature distributions, and multi-dimensional particle trajectories with the use of the discrete phase model (DPM). We also examined the effect of particle size on the flame spray process. It was found that particle velocity and gas temperature decreased rapidly in the radial direction, and they were substantially affected by the particle size.

• 한국연소학회지
• /
• 제10권3호
• /
• pp.34-41
• /
• 2005

Hydrogen safety is one of the key technical issue with growing attention on utilization of hydrogen energy. This study is aimed to predict behavior of momentum-controlling buoyant jet and flame caused by hydrogen leakage from a high pressured tank. Approximate solutions were derived for the case of turbulent buoyant jet and diffusion flame in still air. In case of hydrogen jet with low Froude number (100-4000), computed jet trajectories were compared with experimental data and showed good agreement with them. Jet and flame trajectories and flame length of hydrogen are predicted and compared with the buoyant flame of propane. The results well show that buoyancy is dominant in the range of low Froude number, while initial momentum is dominant in the range of high Froude number. That effect is more distinct for hydrogen flame than the case of propane.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2002년도 제24회 KOSCO SYMPOSIUM 논문집
• /
• pp.113-122
• /
• 2002

The purpose of this study is to verify that the modified Lagrangian model can predict temperature, flow and scalar fields in the high temperature recirculation region of swirling confined diffusion flame. In the meantime numerical results from EBU and Equilibrium PDF models as well as experimental results are compared with those from the modified Lagrangian model. Adaption of three different turbulent models were accompanied with this procedure. Look-up table of the ignition characteristic time scale which is one of important factors of the Lagrangian model was referred to the 11-step reduced mechanism. Eventually, results with the Lagrangian model show a good accordance with experimental results, which shows the validity of this model. Results from Chen's model differ from those of the others. Numerical results of ${\widetilde{k}$ show significant deviation from experimental results for three models.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1999년도 제19회 KOSCO SYMPOSIUM 논문집
• /
• pp.11-20
• /
• 1999

Acoustic pressure response and NO formation of hydrogen-air diffusion flames at various pressures are numerically studied by employing counterflow diffusion flame as a model flame let in turbulent flames in combustion chambers. The numerical results show that extinction strain rate increases linearly with pressure and then decreases, and increases again at high pressures. Thus, flames are classified into three pressure regimes. Such non-monotonic behavior is caused by the change in chemical kinetic behavior as pressure rises. Acoustic pressure response in each regime is investigated based on the Rayleigh criterion. At low pressures, pressure-rise causes the increase in flame temperature and chain branching/recombination reaction rates, resulting in increased heat release. Therefore, amplification in pressure oscillation is predicted. Similar phenomena are predicted at high pressures. At moderate pressures, weak amplification is predicted. Emission index of NO shows similar behaviors as to the peak-temperature variation with pressure.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1999년도 제19회 KOSCO SYMPOSIUM 논문집
• /
• pp.47-54
• /
• 1999

A method is developed to include the effect of volume expansion in the description of the flame dynamics using G-equation. Line volume-source is used to represent the effect of the exothermic process of combustion with source strength assigned by the density difference between the burned and the unburned region. The present model provides good agreement with the experimental results by using realistic volume expansion ratio which was not reached in the previous researches. Including volume expansion, the flow predicts the same behavior of measured velocity field qualitatively. The flame propagation in varying flow field due to volume expansion provides a promising way to represent the wrinkled turbulent premixed flames in a numerically efficient manner.