• 제목/요약/키워드: Turbulence Mode

검색결과 103건 처리시간 0.023초

난류 유동장 내 구형 액적의 연소특성 (Combustion Characteristics of Spherical Droplet in Turbulent Flow Field)

  • 조종표;김호영;윤석구
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2005년도 제31회 KOSCO SYMPOSIUM 논문집
    • /
    • pp.132-137
    • /
    • 2005
  • The burning characteristics of interacting spherical droplet in a turbulent flow are numerically investigated. The transient combustion of 3-dimensionally arranged droplets, both the fixed streamwise droplet distances of 3 radii and 10 radii and different turbulence intensities, is studied. The results obtained from the present numerical analysis show that droplet vaporization rate for heptane droplet is insensitive to turbulence intensity, and that the transient flame configuration and retardation of droplet surface temperature augmentation with streamwise droplet spacing substantially influence vaporization process of interacting droplets. Single flame mode in which individual flames are merged into single flame, with decreasing streamwise droplet spacing, becomes faster. Therefore, vaporization rate of the second droplet with decreasing streamwise droplet spacing decreases remarkably with flame movement.

  • PDF

난류 가진에 의한 증기발생기 전열관의 마모 일률 평가 (Work-rate Estimation for Predicting Fretting-wear in SG Tubes due to Turbulence Excitation)

  • 조봉호;유기완;박치용
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2004년도 춘계학술대회논문집
    • /
    • pp.115-118
    • /
    • 2004
  • In this study, amplitudes of turbulence excitation are obtained for selected tubes inside the KSNP SG and their normal work-rates are investigated to estimate the magnitude of fretting-wear. From the results of numerical calculation, row 40&41 tubes show the maximum work-rates. Up to this row number, the work-rates inside the row 41 have much larger values than those of outside tubes. This phenomenon reveals the particular central one which has larger normal work-rate than that of outside zone. It turns out that both of the higher local mode at the U-bend region and the larger value of effective mass in the central region Increase the normal work-rate enormously.

  • PDF

Thermo-Acoustic Instability in the Horizontal Rijke Tube

  • Song Woo-Seog;Lee Seung-Bae;Shin Dong-Shin;Na Yang
    • Journal of Mechanical Science and Technology
    • /
    • 제20권6호
    • /
    • pp.905-913
    • /
    • 2006
  • The instability curve of a Rijke tube system was obtained accurately by following different paths of heat power and flow-rate for three regions and by defining its locus from the criterion based on the measured sound pressure levels. The unstable limits in the region of flow-rate lower than that at the minimal power are compared with previous data. To observe the effect of turbulence on the unstable limits, inflow turbulence was introduced by placing a bundle of circular cylinders upstream of the heating part ($50). The large-amplitude inflow fluctuation may delay the transition of the chamber acoustic mode to the unstable Bone even at a sufficient power.

증기발생기 전열관의 유체탄성불안정성 및 난류가진 특성 연구 (Study on the Fluid-elastic Instability and Turbulence Excitation for the Steam Generator Tube)

  • 유기완;박치용;박수기;이종호
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2001년도 추계학술대회논문집 II
    • /
    • pp.1400-1405
    • /
    • 2001
  • In this study, an analysis program to assess the susceptibility of steam generator tubes due to the flow-induced vibration was developed. Analysis of fluid-elastic instability and random turbulence excitation for the U-tube bundle in CE-type steam generator was accomplished. The effective mass distribution along the U-tube was obtained to calculate the natural frequency and dynamic mode shape. Finally, stability ratios and rms vibration amplitude for selected tubes are obtained.

  • PDF

난류-캐스케이드 상호 작용에 의한 광대역 소음장의 시간영역 계산 (Time-domain Computation of Broadband Noise due to Turbulence - cascade Interaction)

  • 정성수;정완섭;이수갑;정철웅
    • 한국소음진동공학회논문집
    • /
    • 제16권3호
    • /
    • pp.263-269
    • /
    • 2006
  • The objective of the present work is to develop a time-domain numerical method of broadband noise in a cascade of airfoils. This paper focuses on dipolar broadband noise sources, resulting from the interaction of turbulent inflows with the flat-plate airfoil cascade. The turbulence response of a two-dimensional cascade is studied by solving both of the linearised and the full nonlinear Euler equations employing accurate higher order spatial differencing, time stepping techniques and non-reflecting inflow/outflow boundary condition. The time-domain result using the linearised Euler equations shows good agreement with the analytical solution using the modified LINSUB code. Through the comparison of the nonlinear time-domain result using the full nonlinear Euler equations with the linear, it is found that the acoustic mode amplitude of the nonlinear response is less than that of the linear response due to the energy cascade from low frequency components to the high frequency ones. Considering the merits of the time-domain methods over the typical time-linearised frequency-domain analysis, the current method is expected to be promising tools for analyzing the effects of the airfoil shapes, non-uniform background flow, linear-nonliear regimes on the broadband noise due to turbulence-cascade interaction.

비평형 2.5 난류모델을 이용한 라그란지안 입자 확산모델 개발 (Development of Lagrangian Particle Dispersion Model Based on a Non-equilibrium 2.5 Level Closure Turbulence Model)

  • 구윤서
    • 한국대기환경학회지
    • /
    • 제15권5호
    • /
    • pp.613-623
    • /
    • 1999
  • A Lagrangian particle dispersion mode l(LPDM) coupled with the prognostic flow model based on nonequilibrium level 2.5 turbulence closure has been dcveloped to simulate the dispersion from an elevated emission source. The proposed model did not require any empirical formula or data for the turbulent statistics such as velocity variances and Lagrangian time scales since the turbulence properties for LPDM were calculated from results of the flow model. The LPDM was validated by comparing the model results against the wind tunnel tracer experiment and ISCST3 model. The calculated wind profile and turbulent velocity variances were in good agreement with those measured in the wind tunnel. The ground level concentrations along the plume centerline as well as the dispersion codfficients also showed good agreement in comparison with the wind tunnel tracer experiment. There were some discrepancies on the horizontal spread of the plume in comparison with the ISCST3 but the maximum ground level concentrations were in a good confidence range. The results of comparisons suggested that the proposed LPDM with the flow model was an effective tool to simulate the dispersion in the flow situation where the turbulent characteristics were not available in advance.

  • PDF

단일 공동주위의 2차원과 3차원 초음속 유동 비교 (COMPARISON OF TWO- AND THREE-DIMENSIONAL SUPERSONIC TURBULENT FLOWS OVER A SINGLE CAVITY)

  • 우철훈;김재수
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2005년도 추계 학술대회논문집
    • /
    • pp.235-238
    • /
    • 2005
  • The unsteady supersonic flow over two- and three-Dimensional cavities has been analyzed by the integration of unsteady Reynolds-Averaged Navier-Stokes(RANS) with the k - w turbulence model. The unsteady flow is characterized by the periodicity due to the mutual relation between the shear layer and the internal flow in cavities. Numerical method is upwind TVD scheme based on the flux vector split with the Van Leer limiters, and time accuracy is used explicit 4th stage Runge-Kutta scheme. Cavity flows are Comparison of two- and three-dimensional. The cavity has a L/D ratio of 3 for two-dimensional case. and same L/D and W/D ratio is 1 for three-dimensional case. The Mach and Reynolds numbers are held constant at 1.5 and 450000 respectively. For the three-dimensional case, the flow field is observed to oscillate in the 'shear layer mode' with a feedback mechanism that follow Rossiter's formula. On the other hand, the self-sustained oscillating flow transitions to a 'wake mode' for the two-dimensional simulation, with more violent fluctuations inside the cavity.

  • PDF

숯계산에 의한 초음속 제트의 스크리티 톤 소음 해석 (Numerical Analysis on Screech Tone in a Supersonic Jet)

  • 김용석;이덕주
    • 한국항공우주학회지
    • /
    • 제35권2호
    • /
    • pp.94-100
    • /
    • 2007
  • 초음속 제트 마하수 1.07부터 1.2 범위에서 축대칭 제트 스크리치 톤을 해석하였다. 축대칭 모드는 낮은 마하수 축대칭 제트의 지배적인 스크리치 톤 모드이다. 난류 해석을 위해 수정된 Spalart-Allmaras 모델을 RANS (Reynolds-averaged Navier-Stokes) 방정식에 사용하였다. 스크리치 톤 해석에서 중요한 음파의 전파, shock-cell 구조 및 거대한 불안정 파를 정확히 계산하기 위해 비반사 특성 경계조건과 연계한 고차정확도의 ENO 기법을 사용하였다. 수치 해석결과는 다른 연구자들의 실험 및 계산 결과와 잘 일치하였으며, 따라서 본 연구에 사용된 수치 기법들이 초음속 제트 유동 및 소음연구에 타당함을 확인하였다.

소형 액체로켓엔진 인젝터의 분사성능 고찰을 위한 분무특성 매개변수 측정 (Measurement of Spray Characteristic Parameters for Inquiry into Small LRE-Injector's Injection Performance)

  • 정훈;김진석;김정수;박정;최종욱
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2009년도 춘계학술대회 논문집
    • /
    • pp.141-144
    • /
    • 2009
  • 액체로켓엔진 연소실의 연소특성은 인젝터의 성능에 지대한 영향을 받는다. 본 논문은 소형 액체로 켓엔진 인젝터의 분사성능 고찰을 위해 이중모드 위상도플러속도계를 이용하여 분사압력 및 분무의 횡단방향 이동거리 변화에 따라 액적의 속도, Sauter 평균직경, 난류강도와 같은 분무특성 매개변수를 측정한다. 또, Weber 수와 Reynolds 수를 활용하여 인젝터 분무의 미립화 및 난류특성을 규명한다.

  • PDF

초음속 유동장에서 기저 유동의 Detached Eddy Simulation (DETACHED EDDY SIMULATION OF BASE FLOW IN SUPERSONIC MAINSTREAM)

  • 신재렬;원수희;최정열
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2008년도 학술대회
    • /
    • pp.104-110
    • /
    • 2008
  • Detached Eddy Simulation (DES) is applied to an axisymmetric base flow at supersonic mainstream. DES is a hybrid approach to modeling turbulence that combines the best features of the Reynolds-averaged Navier-Stokes RANS) and large-eddy simulation (LES) approaches. In the Reynolds-averaged mode, the model is currently based on either the Spalart-Allmaras (S-A) turbulence model. In the large eddy simulation mode, it is based on the Smagorinski subgrid scale model. Accurate predictions of the base flowfield and base pressure are successfully achieved by using the DES methodology with less computational cost than that of pure LES and monotone integrated large-eddy simulation (MILES) approaches. The DES accurately resolves the physics of unsteady turbulent motions, such as shear layer rollup, large-eddy motions in the downstream region, small-eddy motions inside the recirculating region. Comparison of the results shows that it is necessary to resolve approaching boundary layers and free shear-layer velocity profiles from the base edge correctly for the accurate prediction of base flows. The consideration of an empirical constant CDES for a compressible flow analysis may suggest that the optimal value of empirical constant CDES may be larger in the flows with strong compressibility than in incompressible flows.

  • PDF