• 설비공학논문집
• /
• 제25권3호
• /
• pp.143-149
• /
• 2013

In this work, nucleate pool boiling heat transfer coefficients (HTCs) of R134a and R1234yf are measured, on flat plain, 26 fpi low fin, Turbo-B, Turbo-C and Thermoexcel-E surfaces. All data are taken at the liquid pool temperature of $7^{\circ}C$, on a small square copper plate ($9.53mm{\times}9.53mm$), at heat fluxes from $10kW/m^2$ to $200kW/m^2$, with an interval of $10kW/m^2$. Test results show that nucleate boiling HTCs of all enhanced surfaces are greatly improved, as compared to that of a plain surface. Nucleate pool boiling HTCs of R1234yf are very similar to those of R134a, for the five surfaces tested.

• 설비공학논문집
• /
• 제23권3호
• /
• pp.194-200
• /
• 2011

In this work, nucleate pool boiling heat transfer coefficients(HTCs) of pure water are measured on horizontal 26 fpi low fin, Turbo-B and Thermoexcel-E square surfaces of 9.53 mm length. HTCs are taken from 10 $kW/m^2$ to critical heat flux for all surfaces. Test results show that critical heat fluxes(CHFs) of all enhanced surfaces are greatly improved as compared to that of a plain surface. CHFs of water on the 26 fpi low fin surface, Thermoexcel-E surface, and Turbo-B are increased up to 320%, 275%, and 150% as compared to that of the plain surface, respectively. CHF of the Turbo-B enhanced surface is lower than that of the 26 fpi low fin surface due to the surface geometry. The heat transfer enhancement ratios of the Thermoexcel-E surface, low fin surface and Turbo-B enhanced surface are 1.6~2.9, 1.6~2.1, 1.4~1.7 respectively in the range of heat fluxes tested. Judging from these results, it can be said that these types of enhanced surfaces can be used in heat transfer applications at high heat fluxes.

• 설비공학논문집
• /
• 제23권3호
• /
• pp.179-187
• /
• 2011

In this work, nucleate pool boiling heat transfer coefficients(HTCs) of 5 refrigerants of differing vapor pressure are measured on horizontal low fin and Turbo-B square surfaces of 9.53 mm length. Tested refrigerants are R32, R22, R134a, R152a and R245fa and HTCs are taken from 10 $kW/m^2$ to critical heat fluxes for all refrigerant at $7^{\circ}C$. Wall and fluid temperatures are measured directly by thermocouples located underneath the test surface and in the liquid pool. Test results show that Critical heat fluxes(CHFs) of all enhanced surfaces are greatly improved as compared to that of a plain surface in all tested refrigerants. CHFs of all refrigerants on the 26 fpi low fin surface are increased up to 240% as compared to that of the plain surface. HTCs on both low fin and Turbo-B surfaces increase with heat flux. After certain heat flux, however, they decrease. CHFs of the Turbo-B enhanced surface are lower than that of the 26 fpi low fin surface. This phenomenon is due to the difference in surface structure of the low fin and Turbo-B surface.

• 대한기계학회논문집B
• /
• 제37권4호
• /
• pp.343-352
• /
• 2013

본 연구에서는 열전달 표면의 형상과 그 위에서의 유동 속도의 변화에 따른 풀 비등 열전달계수의 변화를 살펴보기 위해 평판, 낮은 핀, Thermoexcel-E, Turbo-B 표면을 사용하여 유동 속도를 변화시켜가며 임계 열유속까지 열전달계수를 측정하였다. 작동 유체로는 증류수를 사용하였고 사각 평면 히터($9.53{\times}9.53mm$)를 이용하여 네 가지 표면에서 임계 열유속까지의 데이터를 얻을 수 있도록 장치를 제작하였고 $60^{\circ}C$에서 유동 속도를 0, 0.1, 0.15, 0.2m/s로 변화시켜가며 데이터를 취했다. 실험 데이터를 보면 모든 표면에서 유동이 있을 때의 임계 열유속은 유동이 없을 때에 비해 높은 것으로 나타났다. 또한 표면적의 증가와 기포 이탈에 충분한 핀 간격 등으로 인해 낮은 핀 표면의 임계 열유속은 평판이나 Turbo-B, Thermoexcel-E 표면보다 훨씬 놓았고 평판에 비해서는 무려 5배 정도의 향상을 보였다. 한편 대형 냉동기의 증발기용으로 개발된 Turbo-B와 Thermoexcel-E 표면은 물에서 기포의 이탈 지름이 크므로 열전달계수와 임계 열유속 모두 예상보다 큰 효과를 나타내지 않았다. $50kW/m^2$이하의 저열유속에서는 모든 표면에 대해 유동 속도 증가에 따라 열전달계수가 증가하였다. 결론적으로 핵발전소의 증기발생기에 적용하기에는 낮은 핀 형상의 표면이 가장 좋은 것으로 나타났다.