• 대한기계학회논문집B
• /
• 제21권1호
• /
• pp.99-112
• /
• 1997

Mixing process of impinging jets of liquid oxidizer and liquid fuel is simulated by using water and sodium carbonate (Na$_{2}$CO$_{3}$) solution. The shapes of liquid sheets are visualized and flowrate distributions are measured by collecting droplets using measuring cells. Mixing charateristics are studied by using acid-base titration. Stable liquid sheets are formed and two liquid jets are well mixed for symmetric impinging jets. Similarity in flowrate distribution for various measuring heights is observed. For asymmetric impinging jets, liquid sheets become unstable as the difference in the velocities of jets increases. In some extreme cases, liquid sheets are not formed and the jets are separated. Dimensionless variables are adopted demonstrating similarly in flowrate distribution. Mixing characteristics vary significantly with experiment conditions.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제26회 춘계학술대회논문집
• /
• pp.167-170
• /
• 2006

파이로시동기는 단시간동안 1회 작동하여 터보펌프의 로터를 적절한 회전수로 돌려주어야만 한다. 이때 펌프의 가압된 추진제 성분이 가스발생기로 공급되어 연소되며 이로써 터빈의 지속적인 회전을 보장하게 된다. 본 연구에서는 가스발생기의 동작 이전의 엔진시동초기 작동시퀀스에서 터보펌프의 요구성능에 합당한 파이로 시동기의 규격을 선정하였다.

• 한국전산유체공학회지
• /
• 제1권1호
• /
• pp.19-25
• /
• 1996

A multiblock grid generation has been developed to be reliably used for a Navier-Stokes simulation of the turbomachinery flow-fields A multiblock structure simplifies the creation of structured H-grids about complex turbomachinery geometries and facilitate the creation of a grid in the tip flow region. The numerical algorithm adopts the combination of the algebraic and elliptic method to create the internal grids efficiently and quickly. The grid refinement process is enhanced by developing strategies to utilized Bezier curves and splines along with weighted transfinite interpolation technique and by formulating the grid-imbedding method for the viscous boundary-layer meshes. For purposes of illustration, the grid generator is applied to the high turning turbine rotor blades. Two different types of computational grids are provided to be compared with respect to the grid adaptation to the flow simulations. Extension to three-dimensions was done to show the possibility of its application to the tip-flow simulations. The grid quality of the multiblock structure is good in the passages, with gloval orthogonality and adequate smoothness.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.603-606
• /
• 2002

Numerical analysis and its inverse design process of 2nd stage of JT8D aircraft engine is described. One of the most important factors that affect the performante of turbomachine is secondary flow in the blade passage, so that the performance of turbomachine can be improved by controlling secondary flow. In this paper, as a method to control secondary flow, commercial inverse design program, TurboDesign is used. Meridional derivative of angular momentum is selected as a parameter to control blade leading in this program, To validate inverse designed model, computational analysis is applied which includes rotor-stator-interaction. In this paper, CFB results of both original and inverse designed model are compared to examine how much the performance improves without reduction of work output.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.197-200
• /
• 2007

FCEV uses electric energy generated from fuel cell stack, thus all consisting parts must be re-designed to be suitable for electricity based system. Cathode air blower which supplies compressed air into fuel cell stack has similar shape of turbocharger, but a radial turbine of traditional turbocharger is removed and high speed BLDC motor is installed . Generally, maximum 10% of electric power of fuel cell stack is consumed in air blower, therefore an effective design of air blower can improve the performance of FCEV directly. This study will present an aerodynamic design process of an air blower and compare computational results with experimental data.

• Journal of Advanced Marine Engineering and Technology
• /
• 제18권2호
• /
• pp.97-103
• /
• 1994

This paper describes briefly the simulation program for predicting the performance of a high speed turbocharged four cycle diesel engine. The wave phenomena in the intake and exhaust systems are calculated by the characteristic method. The combustion process in the power cycle is represented by the heat release pattern which is given by the Wiebe's function or the pattern based on measured values. Turbocharger matching for the engine is described by utilizing the characteristic maps of both the compressor and turbine, which are obtained from quasi-steady states. A comparison of experimental and calculated results shows a good agreement. Then the influences of the intake system, the period of valve overlap and the characteristics of the turbine are numerically investigated by the simulation.

• Journal of Welding and Joining
• /
• 제12권3호
• /
• pp.71-81
• /
• 1994

Laser cutting is experiencing a rising worldwide acceptance in the industry. Expert systems are necessary for the systematic arrangement and searching of experimental data existing in journal papers, job handbooks, etc.. This paper proposes an expert system for the selection of the appropriate laser cutting variables from the available database. Optimum cutting conditions according to the given cutting velocity were searched and qualitative comments which are difficult to be used as database variables were shown at each velocity using the binary and fuzzy inference. These comments could be informative to unskilled operators of the laser cutting process. Typical cutting conditions of the mild steel and stainless steel were included and the working range and quality variations were displayed graphically. The proposed algorithm was implemented in an IBM compatible personal computer as an expert system for CO$_{2}$ laser cutting to derive the optimum cutting conditions by using the turbo prolog.

• 오토저널
• /
• 제10권5호
• /
• pp.69-82
• /
• 1988

Heat transfer experiment is carried out during the performance test of the 4-cylinder 4-stroke cycle turbo-charged gasoline engine. Cycle simulation employing the measured pressure in cylinder, the cooling water temperature and flow rate and others is carried out in order to calculate the gas temperature in cylinder. In this simulation combustion process was simulated by Annand's two zone model and suction, compression, and other processes are calculated completely. From this simulation, we can obtain not only the heat transfer coefficient but also the flame speed, turbulent burning velocity, flame factor and the boiling condition of cooling passage. The results are investigated with engine speed, equivalence ratio and spark advance.

• 산업경영시스템학회지
• /
• 제21권45호
• /
• pp.265-277
• /
• 1998

The control chart has been used widely and importantly as a tool for statistical process control(SPC). Most companies are concerned with improving the quality and the productivity as well as reducing the cost, especially in today's highly competitive environment. Though SPC is known as a technique for consistent quality, it is not used properly due to lack of knowledge about it. It is required to develop a support system for control chart selection and interpretation that can be utilized by non-specialist without hard training or experiences. The support system was developed by applying the expert system tool to popular control charts. Though some researches on this area has been performed, the implemented results expose many problems in field applications due to the unsatisfactory explanation of the selected control chart and limited knowledge base for resolving the problems. This thesis presented an expert system for control chart as solution for these problems. The expert system for the control chart selection and interpretation is developed by using Turbo C and EXSYS which is an expert system development tool.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2007년도 하계종합학술대회 논문집
• /
• pp.179-180
• /
• 2007

In this paper, it proposes an efficient iterative stopping rules using absolute mean values for the LLR difference values between the first and second decoder in the present decoding process. It is verifying that the proposal algorithm can be reduced the average number of iterations compared to conventional scheme with a negligible degradation of the error performance.