• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.109-114
• /
• 2003

It is the common practice to reinforce excessively the secondary tunnel lining due to the lack of rational insights into the ground loosening loads. The main load of the secondary lining for drained-type tunnels is the ground loosening. The main cause of the load for secondary tunnel lining is the deterioration of the primary support members such as shotcrete, steel ribs, and rockbolts. Accordingly, the development of the analysis model to consider the ground-primary supports-secondary lining interaction is very important for the rational design of the secondary tunnel lining. In this paper, the interaction is conceptually described by the simple mass-spring model and the load transfer from the primary supports to the ground and the secondary lining is showed by the characteristic curves including the secondary lining reaction curve for the theoretical solution of a circular tunnel. And also, the application of this model to numerical analysis is verified in order to review the potential tool for practical tunnel problems with the complex conditions like non-circular shaped tunnels, multi-layered ground, sequential excavation and so on.

• 터널과지하공간
• /
• 제18권6호
• /
• pp.491-502
• /
• 2008

터널 주위에 다른 구조물이 인접하여 건설될 때 터널의 구조적인 안정성을 확보하기 위해서는 주변 지반의 일정범위를 원상태로 보전하여야 하며, 이와 같은 범위를 터널의 안전영역이라고 한다. 터널 교차지역에서 새로운 터널이 건설될 때 기존터널의 안정성을 확보하기 위한 주요 요인은 터널간 이격거리, 새로운 터널의 규모 및 굴착방법, 터널 주변지반의 조건, 기존터널의 라이닝 구조와 건전도 등이며, 새로운 터널이 기존터널의 상부에 근접하여 교차하는 경우 기존터널은 새로운 터널 방향으로 기존터널 상부에서 변형이 발생하고, 기존터널 주변지반의 아칭효과 손상, 그리고 새로운 터널에서의 활하중의 영향 등을 받게 된다. 반면에 새로운 터널이 기존터널 하부에서 굴착되는 경우 기존터널은 침하의 영향을 받게 된다. 본 연구는 새로운 터널이 기존터널의 하부에서 굴착될 때 수치해석을 통하여 안전영역을 평가하였으며, 모형실험을 통하여 지반의 거동특성을 파악하였다. 모형실험과 수치해석에 의하여 토압의 변화, 지반변위 및 내공변위를 상호 비교하였으며, 유사한 경향을 보이고 있다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1319-1324
• /
• 2007

Many researches have been performed to analyze the smoke movement in tunnel fires by using field model. Recently, FDS(Fire Dynamics Simulator) v.4, which is one of the field model and developed from NIST(National Institute of Standards and Technology), is widely used. In tunnel fires, FDS can show detail results in local point, but it has difficulties in boundary condition and taking long computing time as the number of grid increases. So, there is a need to use alternative method for tunnel fire simulation. A zone model is different kind of CFD method and solves ordinary differential equation based on conservation and auxiliary equations. It shows good macroscopic view in less computing time compared to field model. In this study, therefore, to confirm the applicability of CFAST in tunnel fire analysis, numerical simulations using CFAST are conducted to analyze smoke movement in longitudinal ventilation reduced-scale tunnel fires. Then the results are compared with experimental results. The differences of temperature and critical velocity between numerical results and experimental data are over $30^{\circ}C$ and 0.9m/s, respectively. These values are out of error range. It shows that CFAST 6.0 is hard to be used for tunnel fire simulation.

• 한국전산유체공학회지
• /
• 제14권3호
• /
• pp.115-122
• /
• 2009

Numerical methods are applied to simulate the smoke behavior in a ventilated tunnel using large eddy simulation (LES) which is incorporated in FDS (Fire Dynamics Simulator) with proper combustion and radiation model. In this study, present numerical results are compared with data obtained from experiments on pool fires in a ventilated tunnel. The model tunnel is $182m(L){\times}5.4m(W){\times}2.4m(H)$. Two fire scenarios with different ventilation rates are considered with two different fire strengths. The present results are analyzed with those from LES without combustion and radiation model and from RANS ($\kappa-\epsilon$) model as well. Temperature distributions caused by fire in tunnel are compared with each other. It is found that thermal stratification and smoke back-layer can be predicted by FDS and the temperature predictions by FDS show better results than LES without combustion and radiation model. The FDS solver, however, failed to predict correct flow pattern when the high ventilation rate is considered in tunnel because of the defects in the tunnel-inlet turbulence and the near-wall turbulence.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.579-582
• /
• 2005

Tunnel lining is the final support of a tunnel and reflects the results of the interaction between ground and support system. Recently it is very difficult to support and manage the tunnel because the cracks on tunnel lining cause problems in supporting and managing tunnels. Therefore the analysis of the cracks is quite strongly required. The major role played by the steel fiber occurs in the post-cracking zone, in which the fibers bridge across the cracked matrix. Because of its improved ability to bridging cracks, steel fiber reinforcement concrete(SFRC) has better crack properties than that of reinforced concrete. In this study, mechanical behaviour of a tunnel lining was examined by model tests. The model tests were carried out under various conditions taking different loading shapes, thicknesses and leakage of lining, and volume content of steel fiber. From these model test, the cracking load, the failure load, defection and cracking position and type were examined and the characteristics of deformation and failure for tunnel lining were estimated and researched.

• 한국철도학회논문집
• /
• 제5권4호
• /
• pp.244-252
• /
• 2002

We must notice ground movement by excavation for reasonable tunnel designs. The convergence confinement method is an attempt to evaluate tunnel stability conditions by means of a mathematical model and a ground response curve. In this study, the convergence confinement method by numerical model was examined. This method don't need the basic assumptions for a mathematical model of circular tunnel shape, and hydrostatic in situ stress. Also modified ground response curve that is calculated after installing the support, is suggested, which informs us the ground movement mechanism. The ground response curve and the support reaction curve are mutually dependent. Especially the support reaction curve depends upon the ground response curve. The mechanism of tunnel must be analyzed by the interaction between support and ground. Consequently the stability of tunnel must be qualitatively investigated by a ground response curve and quantitatively adjudged by a numerical analysis for the reasonable design of tunnel.

• Wind and Structures
• /
• 제16권2호
• /
• pp.137-156
• /
• 2013

A wind tunnel test of a scaled-down model and field measurement were effective methods for elucidating the aerodynamic behavior of a chimney under a wind load. Therefore, the relationship between the results of the wind tunnel test and the field measurement had to be determined. Accordingly, the set-up and testing method in the wind tunnel had to be modified from the field measurement to simulate the real behavior of a chimney under the wind flow with a larger Reynolds number. It enabled the results of the wind tunnel tests to be correlated with the field measurement. The model surface roughness and different turbulence intensity flows were added to the test. The simulated results of the wind tunnel test agreed with the full-scale measurements in the mean surface pressure distribution behavior.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.460-467
• /
• 2006

Some large accidents in tunnels in recent years, such as Mont Blanc, Gotthard and Tauern tunnels, have lead to an increasing attention for tunnel safety and necessity of tool for quantitative risk assesment of road tunnel. And the purpose of this study is to develop the quantitative risk assesment tool for the application of road tunnel. The objectives of this paper are as follows : (1) analyze of traffic accident rates in tunnel, (2) make out scenario for fire accidents, (3) develop the evacuation model and FED calculation model, (4) Present the results from quantitative risk assesment for the model tunnel according with the fire heat release rates and distances of cross passage.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1330-1336
• /
• 2007

본 연구는 미기압파 해석에 필요한 각종계수의 도출 및 해석결과의 신뢰성을 검증하기 위한 목적이 있다. 본 실험에 사용된 터널 주행 열차모형 실험 장치는 1/60축척으로 제작 되었으며, 열차는 KTX 차량 모델의 제원에 맞추어 10량 1편성으로 제작된 모형을 사용하였다. 터널의 다면적은 $107.9m^3$ 와 $95.1m^3$를 적용하고, 터널연장은 1km, 0.78km, 0.5km를 적용하였고, 열차속도는 275, 300, 325, 350km/h로 변화시켜 실험 하였다. 실험 장치는 유압발사 시스템으로 열차모델 유압 발사기터널모델 제동장치로 구성된다. 모형열차의 속도는 터널입구 전방 및 출구 부 갱구에서 각각 1.2m지점에서 설치한 속도 감지기에 의해서 측정되며, 터널 내부의 압력변동은 압력센서를 터널의 입구, 중앙, 출구부에 설치하여 연속적으로 측정 하였다. 측정결과 터널입구에서 발생한 압력파의 압력기울기는 터널을 전파하면서 비선형효과에 의해서 증가하거나 확산작용에 의해서 압력기울기가 감소하는 것을 알 수 있었고, 미기압파 저감 대책을 위해 터널입구에 종류별 각각 설치하여 출구부에서 발생되는 미기압파를 비교분석하여보았다.

• 한국터널지하공간학회 논문집
• /
• 제7권2호
• /
• pp.133-141
• /
• 2005

저토피 구간에서 기존터널 하부에 새로운 터널을 교차하여 신설할 때에 하부 터널굴착으로 인하여 발생하는 교차부 주변지반의 거동을 대형모형실험과 수치해석을 통하여 연구하였다. 모형실험결과 교차 전 후의 하부터널 굴착에 따른 종방향 응력전이가 상부터널에 의하여 차단됨을 알 수 있었다. 수치해석결과에 의하면 측압계수 K = 0.38인 경우에 응력그림자 현상으로 단일터널 천단부에서의 최소주응력 감소는 상하교차터널의 천단에서보다 크게 발생한다. 직각교차터널에서는 기존상부터널의 영향으로 응력그림자 현상이 나타나 단일터널에 비하여 작은 응력감소를 보인다.