• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.251-254
• /
• 1999

This paper presents the basic tuning method for PSS control parameters. This method includes the phase compensation and root-locus based gain tuning for one machine with infinite bus system. At the tuning condition and least stable condition, the effect of gain tuning is also discussed.

• 융합신호처리학회논문지
• /
• 제4권4호
• /
• pp.52-57
• /
• 2003

PID제어기의 파라미터의 조정 방법이 전문가의 경험적 지식과 플랜트 스텝응답 파형 모양에 기초하여 퍼지 싱글톤 추론에 의해 행하는 방법을 나타내었다. 파라미터 조정방법은 두 레벨이 있다. 높은 레벨은 모델링 할 수 없는 플랜트 특성에 대하여 전문가의 Know-how에 기초하여 제어기의 수정계수를 결정하는 것이다. 저 단계는 Ziegler-Nichol 의 한계 감도법의 응답 특성에 의해 특정 계수를 결정한다. 마지막 단계는 량과 제어응답 파형의 면적법에서 얻은 특정량에서 조정 규칙으로 취하고 퍼지추론에 수정 계수와 특정계수로 조정규칙을 만들어 퍼지 싱글톤 추론에 의해 PID제어기의 각 파라미터를 적정한 값으로 자동조정 하는 법을 나타내었다.

• 전자공학회논문지S
• /
• 제34S권7호
• /
• pp.66-77
• /
• 1997

This paper presents an automatic tuning method for parameters of a multivaiable self-tuning velocity-type PID controller which adapts to changes in the system parameters with time delays and noises. The velocity-type PID control structure is determined in the process of minimizing the variance of the auxiliarly output, and self-tuning effect is achieved through the recursive least square algorithm at the parameter estimation stage and also through the Robbins-Monro algorithm at the stage of optiminzing the design parameters of the controller. The proposed PID type multivariable self-tuning method is simple andeffective compared with other esisting multivariable self-tuning methods. Computer simulation has shown that the proposed algorithm is beter than the trial-and-error method in the tracking performance.

• 전기학회논문지
• /
• 제57권6호
• /
• pp.915-923
• /
• 2008

This paper focuses on optimal tuning of nonlinear parameters of a dual-input power system stabilizer(dual-input PSS), which can improve the system damping performance immediately following a large disturbance. Until recently, various PSS models have developed to bring stability and reliability to power systems, and some of these models are used in industry applications. However, due to non-smooth nonlinearities from the interaction between linear parameters(gains and time constants of linear controllers) and nonlinear parameters(saturation output limits), the output limit parameters cannot be determined by the conventional tuning methods based on linear analysis. Only ad hoc tuning procedures('trial and error' approach) have been used. Therefore, the steepest descent method is applied to implement the optimal tuning of the nonlinear parameters of the dual-input PSS. The gradient required in this optimization technique can be computed from trajectory sensitivities in hybrid system modeling with the differential-algebraic-impulsive-switched(DAIS) structure. The optimal output limits of the dual-input PSS are evaluated by time-domain simulation in both a single machine infinite bus(SMIB) system and a multi-machine power system in comparison with those of a single-input PSS.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.272-276
• /
• 2004

The conventional PID (Proportional-Integral-Derivative) control technique is widely used for the process control in many industries since it is simple in structure and provides the good response. Nowadays, this control technique has been developed on the Programmable Logic Controller (PLC) to use for the process control loop. However, using this technique is difficult when tuning the PID parameters ($K_p$, $T_i$ and $T_d$) to achieve the best response. Moreover, trial-and-error procedure along with the operator experiences are required to obtain the best results when tuning the PID controller parameters. This paper proposes the self-tuning PID controller based on PLC for the process control in the industries. The proposed self-tuning PID controller uses the PLC-based PID structures to control the process production. The proposed PID tuning utilizes the PLC to synthesize and analyze controller parameter as well as to tune for appropriate parameters using Dahlin method and extrapolation. Experimental results using a self-tuning PID controller to control temperature of the oven show that the controller developed is capable of controlling the process very effectively and provides a good response.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 F
• /
• pp.2139-2142
• /
• 1997

The most important thing in vector control scheme is the knowledge of accurate electrical motor parameters. These parameters can computed by conventional motor test, such as no-load and locked rotor tests. However, the values from these tests are different from actual motor parameters, and the adjustment process of the parameters is time consuming. This paper presents an auto-tuning method for vector control of induction motor. The tuning algorithm is based on the rotor flux behavior of the induction motor for stepwise torque current command. The transient terminal voltage caused by the undesirable variation of the rotor flux is used for tuning the slip gain $K_5$ defined as the inverse of the rotor time constant. The electrical parameters of induction motor can also calculated by this method. The presented method is evaluated through the computer simulations.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1836-1840
• /
• 2005

This work proposes a controller tuning method of a Hyundai 8608 robot in order to improve its performance. For this, we analyzed the control structure of the robot, and the functions of all the adjustable parameters in the robot controller with a reference 'NACHI Technical Report'. Through the analysis, we found out that 3 important parameters(VRRL, VRF, VRGIN) act like a conventional PID gains and other parameters are closely related to these 3 parameters. Conclusively, parameter tuning of these 3 parameters is enough in most cases of applications with other parameters fixed. The conventional PID tuning is performed to each joint of the test robot with Robot Performance Evaluation System(shown in our companion paper) so that the acceptable gain ranges for each joint are determined and then the robot performance tests are repeatedly done with the combination of the acceptable gains. Finally, the best combination is selected for its best performance. For the effectiveness of the proposed method, it was implemented on a Hyundai 8608 robot and its results are compared with the results of NACHI's Semi-Auto Tuning Method and the results which are done by a tuning expert with his eyes.

• 전자공학회논문지S
• /
• 제36S권11호
• /
• pp.22-33
• /
• 1999

본 논문에서는 시스템의 차수가 고차이고 잡음과 시간지연이 있으며 파라미터가 변하는 비최소위상 시스템에 적응할 수 있는 다변수 일반화 자기동조 제어기의 설계 하중다항식 계수들을 온-라인으로 조정하는 방법을 제안한다. 다변수 일반화 최소분산 자기동조 제어기의 파라미터는 순환최소자승법으로 추정하고 설계 하중다항식 계수들의 값은 확률근사법인 Robbins-Monro알고리듬을 이용하여 자동 조절하였다. 제안한 다변수 자기동조 방법은 극제한방법보다 간단하고 효과적이다. 컴퓨터 시뮬레이션을 통해 제안한 방법이 시스템의 파라미터가 변하고 시스템의 영점이 단위원 밖에 있는 고차 다변수 시스템에 잘 적응함을 보였다.

• 한국경영과학회지
• /
• 제38권1호
• /
• pp.139-152
• /
• 2013

The purpose of this study is to claim the validity of tuning the architecture of neural network models for multi-class classification. A neural network model for multi-class classification is basically constructed by building a series of neural network models for binary classification. Building a neural network model, we are required to set the values of parameters such as number of hidden nodes and weight decay parameter in advance, which draws special attention as the performance of the model can be quite different by the values of the parameters. For better performance of the model, it is absolutely necessary to have a prior process of tuning the parameters every time the neural network model is built. Nonetheless, previous studies have not mentioned the necessity of the tuning process or proved its validity. In this study, we claim that we should tune the parameters every time we build the neural network model for multi-class classification. Through empirical analysis using wine data, we show that the performance of the model with the tuned parameters is superior to those of untuned models.

• 전력전자학회논문지
• /
• 제3권4호
• /
• pp.388-398
• /
• 1998

퍼지제어시스템에 영향을 미치는 요소들은 제어규칙, 소속함수, 퍼지추론, 비퍼지화 그리고 이 출력이득요소 이다. 구성요소들 각각에 의한 동조방법은 요소들 중 일부만을 동조하기 때문에 동조대상 이외의 요소들에 대한 오류와 파라메타의 부적절한 설정등에 의해 적절한 동조가 이루어지지 못할 수 있으며 각 요소들간의 상관관계를 고려하여 동조를 수행해야 하는 어려움이 있다. 입 출력단에서 작용하는 이득요소들은 제어시스템에 직접적인 영향을 미치기 때문에 이들의 선정은 신중을 기해야 한다. 본 연구에서는 퍼지제어시스템의 동조를 위한 제어기 스스로 입 출력이득요소를 산출하는 방법과 퍼지제어기의 구성요소들에 의해 얻어진 초기의 제어값들을 원하는 목표치에 빨리 수렴할 수 있도록 동조하는 방법을 제안하였다.