• 한국생산제조학회지
• /
• 제25권2호
• /
• pp.149-155
• /
• 2016

The purpose of this study is to develop special tools used to extend the tool life for the boom of heavy equipment. The boom of heavy equipment is manufactured by cutting the inner and outer surface with respect to the assembly site essential. In particular, when cutting the inner surface, entry of the tool is difficult owing to the limited size of the inner diameter and non circular cutting. In addition, the productivity is poor because the use of the cutting tool made of the SKH material. Therefore, it is necessary to develop a special tool for machining heavy equipment boom to extend tool life and to improve productivity. The special tool developed this study has the form of a holder and tip. The tip was created by applying a commercially available tungsten carbide insert.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1244_1245
• /
• 2009

Coating of amorphous nitride thin layers, such as boron nitride (BN) and carbon nitride (CN), has been performed on carbon nanotubes (CNTs) for the purpose of enhancing their electron-emission performances because those nitride films have relatively low work functions and commonly exhibit negative electron affinity behavior. The CNTs were directly grown on metal-tip (tungsten, approximately 500 nm in diameter at the summit part) substrates by inductively coupled plasma-chemical vapor deposition (ICP-CVD). Sharpening of the tungsten tips were carried out by electrochemical etching. Morphologies and microstructures of BN and CN films were analyzed by field-emission scanning electron microscopy (FE-SEM), energy dispersive x-ray (EDX) spectroscopy, and Raman spectroscopy. The electron-emission properties (such as maximum emission currents and turn-on fields) of the BN-coated and CN-coated CNT-emitters were characterized in terms of the thickness of BN and CN layers.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1220-1221
• /
• 2008

Submicron-sized conical-type tungsten(W) field-emitters based on carbon nanotubes(CNTs) are fabricated with the configuration of CNTs/catalyst(Ni)/buffer(Al/Ni/TiN)/W-tip. This study focuses on elucidating how the Al/Ni/TiN stacked buffer layer affects the structural properties of CNTs and the electron-emission characteristics of CNT-emitters. Field-emission scanning electron microscopy(FESEM), high-resolution transmission electron microscopy(HRTEM), and x-ray photoelectron spectroscopy(XPS) are used to monitor the nanostructures, surface morphologies, chemical bonds of all the catalysts and CNTs grown. The crystalline structure of CNTs is also characterized by Raman spectroscopy. Furthermore, the measurement of field-emission characteristics for the field-emitters fabricated shows that the emitter using the Al/Ni/TiN stacked buffer reveals the excellent performances.

• Bulletin of the Korean Chemical Society
• /
• 제33권12호
• /
• pp.3981-3986
• /
• 2012

Anatase nanocrystalline and its tungsten-doped (0.4, 2, and 4 mol %) powders have been synthesized by microwave irradiation through hydrolysis of titanium tetra-isopropoxide (TIP) in aqueous solution. The materials are characterized by XRD, Raman, SEM-EDX, TEM, FT-IR and UV-vis techniques. The nanocrystalline $TiO_2$ particles are 30 nm in nature and doping of tungsten ion decreases their size. As seen in TEM images, the crystallites of W (4 mol %) doped $TiO_2$ are small with a size of about 10 nm. The photocatalytic activity was tested on the degradation of 4-nitrophenol (4-NP). Catalytic activities of W-doped and pure $TiO_2$ were also compared. The results show that the photocatalytic activity of the W-doped $TiO_2$ photocatalyst is much higher than that of pure $TiO_2$. Degradation decreases from 96 to 50%, during 115 min, when the initial 4-NP concentration increases from 10 to 120 ppm. Maximum degradation was obtained at 35 mg of photocatalyst.

• Transactions on Electrical and Electronic Materials
• /
• 제9권4호
• /
• pp.169-172
• /
• 2008

We attempted to fabricate carbon nanotube field effect transistor (CNT-FET) using single walled carbon nanotube(SWNT) on the heavily doped Si substrate used as a bottom gate, source and drain electrode were fabricated bye-beam lithography on the 500 nm thick $SiO_2$ gate dielectric layer. We investigated electrical and physical properties of this CNT-FET using Scanning Probe Microscope(SPM) and conventional method based on tungsten probe tip technique. The gate length of CNT-FET was 600 nm and the diameter of identified SWNT was about 4 nm. We could observed gating effect and typical p-MOS property from the obtained $V_G-I_{DS}$ curve. The threshold voltage of CNT-FET is about -4.6V and transconductance is 47 nS. In the physical aspect, we could identified SWNT with phase mode of SPM which detecting phase shift by force gradient between cantilever tip and sample surface.

• 반도체디스플레이기술학회지
• /
• 제9권4호
• /
• pp.7-12
• /
• 2010

Field-emission characteristics of carbon nanotubes(CNTs), which were grown on conical-type tungsten micro-tips by using an electrophoretic deposition(EPD) method, were examined. The EPD method proved to be convenient to manipulate and arrange CNTs from well dispersed suspensions onto such tip-type substrates. The growth rate of CNTs was proportional to the applied d.c. bias voltage and the process time. It was observed from the Raman study that the EPDproduced CNTs showed better crystal qualities with the Raman intensity ratio( $I_D$/$I_G$) of 0.41-0.42 than the CVD-produced CNTs and their crystal qualities could be further improved by thermal annealing. The electron emitters based on the EPDCNTs showed excellent field emission properties, such as the threshold voltage for electron emission of about 620 V and the maximum emission current of about 345 ${\mu}A$. In addition, the EPD-CNTs exhibited the stable long-term(up to 40 h) emission capability and the emission stability was enhanced by thermal annealing.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.986-990
• /
• 2004

In this paper, we propose a method to estimate the actuating voltage of the nanotweezer made by manual assembly using carbon nanotube. The nanotweezer is composed of two CNT arms that are made by the multiwalled carbon nanotube and tungsten tip. Since the each CNT arm has the macro actuator, the nanotweezer can manipulate a large particle and it is possible to close and open the CNT arm repeatedly. The closing voltage, i.e., actuating voltage is calculated using the capacitance between the carbon nanotubes in CNT arm. We demonstrate the actuation of the nanotweezer using the voltage calculated with the electrostatic force.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 춘계학술대회 논문집
• /
• pp.213-216
• /
• 2001

A micro hole punching system was developed and micro holes of 100m in diameter were successfully made on brass sheets of loom in thickness. A micro punch made of tungsten carbide was designed to withstand the punch load, considering the buckling and the bending moment due to possible misalignment error. The punch was fabricated by the grinding process with diamond wheel. The die was designed considering the punch load and fabricated by micro electrodischarge machining process. In this system the stripper is designed to guide punch tip to minimize the possible misalignment. The punch was installed on a vertical stepper and the die was mounted on an X-Y translation unit. The precision motion controller controlled all motions of the micro hole punching system. In this study technical difficulties and solutions in the micro hole punching process were also discussed.

• 한국정밀공학회지
• /
• 제25권3호
• /
• pp.134-140
• /
• 2008

Micro electrochemical machining (ECM) is conducted on stainless steel 304 using non-toxic electrolyte of citric acid. Electrochemical dissolution region is minimized by applying a few hundred second duration pulses between the tungsten SPM tip and the work material. ECM characteristics according to citric acid concentration, feeding velocity and electric conditions such as pulse amplitude, pulse frequency, and offset voltage are investigated through a series of experiments. Micro holes of $60{\mu}m$ in diameter with the depth of $50{\mu}m$ and $90{\mu}m$ in diameter with the depth of $100{\mu}m$ are perforated. Square and circular micro cavities are also manufactured by electrochemical milling. This research can contribute to the development of safe and environmentally friendly micro ECM process.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.210-210
• /
• 2011

Ultrasmall electodes are of great importance for basic electrochemical study and applications. We fabricated single crystal (111) Au nanowire (NW) by growth mechanism on substrate without any catalyst. Consequently, these high aspect NW combined with tungsten microwire and the electrodes having NW tip on their end were obtained. These single crystal Au (111) NWs were characterized by electron microscope and electrochemical analysis. We show that precise electrochemical measurement could be possible on these NW electrode by obtaining underpotential deposition (UPD) and ferricyanide CV profiles on the electrode. The immersed depth of electrode into solution was controlled in micrometer scale by piezo-driven manipulator.