• 대한치과보철학회지
• /
• 제47권2호
• /
• pp.174-181
• /
• 2009

연구목적: 본 연구에서는 35% 과산화수소를 사용하는 전문가 미백 술식에서 레진 접착제의 접착력 회복을 위한 유예 기간을 비교하고자 한다. 연구 재료 및 방법:3M사의 Single Bond와 Z350을 이용하여 미백 직 후, 1일후, 2일후, 일주일 후의 시간 차이를 두고 상아질에 접착된 복합 레진의 전단 결합 강도를 측정하여 다음과 같은 결과를 얻었다. 결과: 미백 처리 직 후의 상아질 전단 결합 강도는 다른 군에 비해 유의하게 낮았으며(P<.05), 미백 처리 전에 비해 약 78%의 결합력 감소를 보였다. 미백 처리 1일 후의 상아질 결합 강도는 미백 직 후 감소된 결합력의 51%에 이르는 회복을 보였으며, 2일 경과한 시편에서는 감소된 결합력의 63%가 회복되었다. 두 군은 미백 직 후에 비해 유의하게 큰 회복력을 보였으나, 두 군 간에는 유의한 차이가 없었다(P>.05). 미백 처리 후 결합력의 회복은 초기 24시간 이내에 급격히 일어나며 그 이후에는 서서히 일어나는 것으로 사료된다. 미백 일주일 후의 시편은 미백 처리 전에 비해97%에 이르는 결합력을 보이며 두 군 간에는 유의한 차이가 없었다(P>.05). 결론: 그러므로35% 과산화수소를 적용하는 전문가 미백 술식에서는 1주일간의 유예기간을 두고 복합 레진 접착술을 시행하는 것이 적절할 것으로 사료된다.

• Restorative Dentistry and Endodontics
• /
• 제25권1호
• /
• pp.46-55
• /
• 2000

During bonding procedure of composite resin, the prepared cavity can be contaminated by saliva. In this study, marginal microleakage and shear bond strength of a composite resin to primed enamel and dentin treated with artificial saliva(Taliva$^{(R)}$) were evaluated. For the marginal microleakage test, Class V cavities were prepared in the buccal surfaces of fifty molars. The samples were randomly assigned into 5 groups with 10 samples in each group. Control group was applied with a bonding system (Scotchbond$^{TM}$ Multi-Purpose plus) according to manufacture's directions without saliva contamination. Experimental groups were divided into 4 groups and contaminated with artificial saliva for 30 seconds after priming: Experimental 1 group ; artificial saliva was dried with compressed air only, Experimental 2 group ; artificial saliva was rinsed and dried. Experimental 3 group ; cavities were etched with 35% phosphoric acid for 15 seconds after rinsing and drying artificial saliva. Experimental 4 group ; cavities were etched with 35% phosphoric acid for 15 seconds and primer was reapplied after rinsing and drying artificial saliva. All the cavities were applied a bonding agent and filled with a composite resin (Z-100$^{TM}$). Specimens were immersed in 0.5% basic fuschin dye for 24 hours and embedded in transparent acrylic resin and sectioned buccolingually with diamond wheel saw. Four sections were obtained from one specimen. Degree of marginal leakage was scored under stereomicroscope and their scores were averaged from four sections. The data were analyzed by Kruscal-Wallis test and Fisher's LSD. For the shear bond strength test, the buccal or occlusal surfaces of one hundred molar teeth were ground to expose enamel(n=50) or dentin(n=50) using diamond wheel saw and its surface was smoothed with Lapping and Polishing Machine(South Bay Technology Co., U.S.A.). Samples were divided into 5 groups. Treatment of saliva-contaminated enamel and dentin surfaces was same as the marginal microleakage test and composite resin was bonded via a gelatin capsule. All specimens were stored in distilled water for 48 hours. The shear bond strengths were measured by universal testing machine (AGS-1000 4D, Shimaduzu Co., Japan) with a crosshead speed of 5 mm/minute. Failure mode of fracture sites was examined under stereomicroscope. The data were analyzed by ANOVA and Tukey's studentized range test. The results of this study were as follows : 1. Enamel marginal microleakage showed no significant difference among groups. 2. Dentinal marginal microleakages of control, experimental 2 and 4 groups were lower than those of experimental 1 and 3 groups (p<0.05). 3. The shear bond strength to enamel was the highest value in control group (20.03${\pm}$4.47MPa) and the lowest value in experimental 1 group (13.28${\pm}$6.52MPa). There were significant differences between experimental 1 group and other groups (p<0.05). 4. The shear bond strength to dentin was higher in control group (17.87${\pm}$4.02MPa) and experimental 4 group (16.38${\pm}$3.23MPa) than in other groups, its value was low in experimental 1 group (3.95${\pm}$2.51 MPa) and experimental 2 group (6.72${\pm}$2.26MPa)(p<0.05). 5. Failure mode of fractured site on the enamel showed mostly adhesive failures in experimental 1 and 3 groups. 6. Failure mode of fractured site on the dentin did not show adhesive failures in control group, but showed mostly adhesive failure in experimental groups. As a summary of above results, if the primed tooth surface was contaminated with artificial saliva, primer should be reapplied after re-etching it.