• Journal of Mechanical Science and Technology
• /
• 제18권12호
• /
• pp.2182-2189
• /
• 2004

In the recent years, environmentally conscious design and manufacturing technologies have attracted considerable attention. The coolants, lubricants, solvents, metallic chips and discarded tools from manufacturing operations will harm our environment and the earth's ecosystem. In the present work, the Tukey method of multiple comparisons is used to select the minimum level of coolant required in a turning process. The amount of coolant is varied in 270 designed experiments and the parameters cutting temperature, surface roughness, and specific cutting energy are carefully evaluated. The effects of coolant mix ratio as well as the amount of coolant on the turning process are studied in the present work. The cutting temperature and surface roughness for different quantity of coolant are investigated by analysis of variance (ANOVA) - test and a multiple comparison method. ANOVA-test results signify that the average tool temperature and surface roughness depend on the amount of coolant. Based on Tukey's Honestly Significant Difference (HSD) method, one of the multiple comparison methods, the minimum level of coolant is 1.0 L/min with 2% mix ratio in the aspect of controlling tool temperature. F-test concludes that the amount of coolant used does not have any significant effect on specific cutting energy. Finally, Tukey method ascertains that 0.5 L/min with 6% mix ratio is the minimum level of coolant required in turning process without any serious degradation of the surface finish. Considering all aspects of cutting, the minimum coolant required is 1.0 L/min with 6% mix ratio. It is merely half the coolant currently used i.e. 2.0 L/min with 10% mix ratio. Minimal use of coolant not only economically desirable for reducing manufacturing cost but also it imparts fewer hazards to human health. Also, sparing use of coolant will eventually transform the turning process into a more environment-conscious manufacturing process.

• 한국정밀공학회지
• /
• 제21권1호
• /
• pp.80-86
• /
• 2004

With the increasing demand of environmentally clean machining in recent years, the use of coolants has been restricted extensively. In this paper, a multiple comparison method(Tukey's HSD method) is proposed to choose the optimum level of coolant necessary for an efficient and environmentally clean machining. The cutting temperature, specific cutting energy, and surface roughness in turning process are analysed by ANOVA(Analysis Of Variance) and Tukey's HSD method. From the experimental results and statistical analysis, it is found that the optimum condition of coolant level is 10 ml/min with 6% mix ratio, which is almost half of the commonly used level.

• 한국운동역학회지
• /
• 제24권4호
• /
• pp.455-461
• /
• 2014

The purposes of this study were to reveal the kinematic and kinetic difference of hard ground soccer shoe, firm ground soccer shoe and soft ground soccer shoe. Soccer players were shoes of varying stud designs with some preferring the bladed studs while others opting for the conventional studded stud. Statistics were used one way-ANOVA and Tukey's Honestly Significant Difference Method. Seven healthy college soccer players were attended a test. All parameters were recorded using the Zebris system. Spatio-temporal variables were no significant difference. Lateral symmetry was statistically significant differences (p<.05). Vertical GRF parameters were no significant difference. Medial midfoot pressure, lateral midfoot pressure and central forefoot pressure were statistically significant differences (p<.05). This study demonstrates that playing surface significantly affects difference soccer shoes during soccer game. Furthermore, epidemiological investigation is warranted to determine the effects of playing surfaces on sport specific injury mechanisms.

• 한국정밀공학회지
• /
• 제18권12호
• /
• pp.110-115
• /
• 2001

In this paper, a multiple comparison was proposed to minimize the amount of coolant. And new coolant level, called "low level", was suggested to show usefulness of multiple comparison for experiments. The amount of this levee is about 1/4 of conventional coolant amount-called "high level", and dry cutting is called "none level". Using these coolant levels, the cutting temperatures of each coolant level in turning process were analyzed by analysis of variance(ANOYA)-test and a multiple comparison. As the result of ANOVA-test, we have just known that the average of temperature of each coolant level is not equal. However by Tukey's HSD, one of multiple comparison. it was analyzed that the average of temperature of low level is similar to that of high levee and different from that of none level.erent from that of none level.

• 대한치과기공학회지
• /
• 제43권3호
• /
• pp.77-83
• /
• 2021

Purpose: The purpose of this in vitro study was to measure and compare the thickness-dependent color dimensions of digital light processing (DLP) three-dimensional (3D) printer and conventional interim restorative resin. Methods: Specimens (N=60) were fabricated using either subtractive manufacturing (S group) or DLP 3D printing (D group) material. All milled and 3D-printed specimens were allocated into three different groups (n=10) according to different thicknesses as follows: 1.0, 1.5, and 2.0 mm. Color measurements in the CIELab coordinates were made using a spectrophotometer under room light conditions (1,003 lux). The color differences (𝚫E^*) between the specimen and control target data were calculated. Data were analyzed using the oneway analysis of variance (ANOVA). Post hoc comparisons were conducted using Tukey's honestly significant difference method (α=0.05 for all tests). Results: The 𝚫L^*, 𝚫a^*, 𝚫b^*, and 𝚫E^* values of interim restorative resin produced by DLP 3D printing were obtained in terms of the specimen's thickness increased compared with the increases by subtractive manufacturing. When the thickness was similar, the color difference between subtractive manufacturing and DLP 3D printing was ≥5.5, which is a value required by the dentist for remanufacturing. Conclusion: Color was influenced by the thickness of the interim restorative resin produced by DLP 3D printing.

• 구강회복응용과학지
• /
• 제27권2호
• /
• pp.197-207
• /
• 2011

의치상의 첨상에 사용하는 레진의 종류가 의치상의 굴곡강도와 굴곡계수에 미치는 영향을 비교하는데 있다. 국제표준규격 제 1567 호(ISO 1567:1999)를 참고로 2 가지의 의치상용 열중합레진(Lucitone199(Dentsply Int., NewYork, USA), SR-Ivocap(Ivoclar AG, Schaan, Liechtenstein))을 이용하여 길이 64 mm ${\times}$ 폭 50 mm ${\times}$ 두께 3.3 mm 의 시편을 제작하였다. 각각의 제작된 시편을 다시 두께 2.0 mm 로 규격화한 뒤 3 종류의 레진(Lucitone199 (Dentsply), SR-Ivocap(Ivoclar), Rebase II(Tokuyama Co., Ltd, Tokyo, Japan))으로 각각 1.3 mm 의 두께로 첨상을 하였다. 제작된 시편(n=10)을 증류수가 담긴 밀폐된 용기 내에 $37^{\circ}C$에서 50 시간 동안 보관하였다. 그 후 만능시험기를 이용하여 시편의 3 점 굴곡강도와 굴곡계수를 측정하였다. 지지대간의 거리는 50 mm, crosshead speed 는 5 mm/min 였다. 측정값은 One-way ANOVA 로 비교 분석하였고, Tukey test 를 이용하여 사후 검정하였다. 열중합형 레진과 자가중합형 레진으로 첨상한 군들은 모두 첨상을 시행하지 않은 대조군보다 통계적으로 유의하게 낮은 굴곡강도와 굴곡계수를 나타났다. 본래의 의치상용 레진의 종류와 무관하게 Lucitone199 을 이용해 첨상한 군이 SR-Ivocap 을 이용한 군보다 통계적으로 유의하게 높은 굴곡강도와 굴곡계수를 보였다. 자가중합형 레진을 이용한 군은 열중합형 레진을 이용한 군 보다 통계적으로 유의하게 낮은 굴곡강도와 굴곡계수를 보였다. 의치상의 첨상 시 자가중합형 레진 보다 열중합형 레진을 이용하는 것이 우수한 기계적 성질을 보였다. 열중합형 레진을 이용한 첨상 시 본래의 의치상과 같은 종류의 레진을 사용하는 것은 의치상의 기계적 성질에 영향을 미치지 않았으며 Lucitone199 를 이용한 가압주형법에서 가장 우수한 물성을 나타냈다.