• International Journal of Ocean System Engineering
• /
• v.1 no.4
• /
• pp.211-221
• /
• 2011

Tugboats are widely used near harbors to assist with various operations such as the berthing and deberthing of very large vessels and the towing of barges. Capsizing accidents involving tugboats occasionally take place when the tugboat makes rapid turns in harsh weather conditions. When there is little evidence suggesting how the accident occurred and when the crew members are missing, it is necessary to predict the time history of the towing vessel’s attitude and trajectory from its departure point to when and where it capsized, depending on various input parameters using a numerical simulation. In this paper, the dynamics of a tugboat and a towed barge in conjunction with the external force and moment were established, and the possible input parameters and operational scenarios which might influence the large roll motion of the tugboat were identified. As a result of analyzing the simulated time history of the excessive roll motion of the tugboat, it was found that roll motion can take place when the tugboat is situated on the crest of a wave and when it is pulled by a towed barge through a towing line. The main cause of the accident would be the parameters that primarily influence such situations. These are the wave parameters, course changing scenario, and the amount of tension.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.1
• /
• pp.107-113
• /
• 2010

The criteria of tugboat requirement in domestic trading ports have been determined by the administrator of regional maritime affairs and port office on the basis of the regulations for the tugboat operations and management. But, there is a little confusion that the criteria of tugboat requirement and method for calculation of them are different from port to port and total power calculated on the basis of power per tugboat requirements by the number of tugs is not in accordance with total required power for the use of tug in several ports. The comparison of tugboat requirements among domestic major ports showed that it should be necessary for the criteria to be made in unified form. Because the current criteria are only on the basis q the ordinary condition with wind velocity under 10m/s, the criteria on the condition of the wind velocity over 10m/s are suggested to be necessary for the precautions against a disaster such as unexpected strong winds or typhoon.

• Journal of Navigation and Port Research
• /
• v.32 no.8
• /
• pp.597-602
• /
• 2008

T.S. HANBADA has a relatively large hull and superstructures above the water line, so she has much of leeway or turning of bow with the effect of winds. Especially on berthing, unberthing and/or sailing on low speed, these effects take place more significant. Therefore, it was carried out the numerical calculation of the wind force and moments acting on the T.S. HANBADA, and then calculated the leeway angle and counter rudder angle with the relative wind direction and velocity. Also, it was suggested the maximum wind velocity which could be berthed or unberthed used by bow thruster and the tugboat operations in strong winds. These results will be great helpful to the vessels with large superstructures on ship's handling in harbour or tugboat operations.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.4 no.3
• /
• pp.199-210
• /
• 2012

The recent researches on the automatic berthing control problems have used various kinds of tools as a control method such as expert system, fuzzy logic controllers and artificial neural network (ANN). Among them, ANN has proved to be one of the most effective and attractive options. In a marine context, the berthing maneuver is a complicated procedure in which both human experience and intensive control operations are involved. Nowadays, in most cases of berthing operation, auxiliary devices are used to make the schedule safer and faster but none of above researches has taken into account. In this study, ANN is applied to design the controllers for automatic ship berthing using assistant devices such as bow thruster and tug. Using back-propagation algorithm, we trained ANN with set of teaching data to get a minimal error between output values and desired values of four control outputs including rudder, propeller revolution, bow thruster and tug. Then, computer simulations of automatic berthing were carried out to verify the effectiveness of the system. The results of the simulations showed good performance for the proposed berthing control system.