• The Korean Journal of Zoology
• /
• v.24 no.2
• /
• pp.65-75
• /
• 1981

The formation of the acrosome during spermatogenesis in Gerris paludum was studied. The Golgi bodies are dispersed randomly in the cytoplasm at the early stage of the spermatocyte and get together to form several group of many bodies, and then they are equally divided into the spermatids by the meiotic divisions. The acroblast first appears in the form of a vesicle and soon an acrosomal granule is differentiated within it. The acroblast is separated from the acrosomal granule at the posterior of the nucleus and is finally sloughed off along the tail filament. The acrosome, after moving to the side of the nucleus opposite the mitochondrial derivatives, differentiates into two zones. The two basal bodies and the differentiated tip originate from the sheath. The basal bodies appear at the proximal part of the sheath simply in contact with the core on one side. During elongation and and narrowing of the acrosomes of the spermatids, they surround the one side at the base of the acrosome and finally all the other are immediately adjacent to the nucleus. The differentiated tip continues to the sheath at the anterior of the cores and is elongated prior to the two basal bodies. They appear to be contiguous twin-tubes, not a single granule in the later stage of the spermatids, and a group of the basal bodies in the sperm bundle.

• Nuclear Engineering and Technology
• /
• v.40 no.1
• /
• pp.21-36
• /
• 2008

High bum-up fuel technology has been developed through a national R&D program, which covers key technology areas such as claddings, $UO_2$ pellets, spacer grids, performance code, and fuel assembly tests. New cladding alloys were developed through alloy designs, tube fabrication, out-of-pile test and in-reactor test. The new Zr-Nb tubes are found to be much better in their corrosion resistance and creep strength than the Zircaloy-4 tube, owing to an optimized composition and heat treatment of the new Zr-Nb alloys. A new fabrication technology for large grain $UO_2$ pellets was developed using various uranium oxide seeds and a micro-doping of Al. The uranium oxide seeds, which were added to $UO_2$ powder, were prepared by oxidizing and heat-treating scrap $UO_2$ pellets. A $UO_2$ pellet containing tungsten channels was fabricated for a thermal conductivity enhancement. For the fuel performance analysis, new high burnup models were developed and implemented in a code. This code was verified by an international database and our own database. The developed spacer grid has two features of contoured contact spring and hybrid mixing vanes. Mechanical and hydraulic tests showed that the spacer grid is superior in its rodsupporting, wear resistance and CHF performance. Finally, fuel assembly test technology was also developed. Facilities for mechanical and thermal hydraulic tests were constructed and are now in operation. Several achievements are to be utilized soon by the Korea Nuclear Fuel and thereby contribute to the economy and safety of PWR fuel in Korea

• Korean Journal of Plant Resources
• /
• v.28 no.2
• /
• pp.235-242
• /
• 2015

Morphology and characteristics of floral organ in highbush blueberry cultivars were studied to select suitable cultivars of highbush blueberry for domestic cultivation. The stamen consists an anther and a tape-like hairy filament with well-developed trichomes. When the anther was opened, the wall of anther was not dehiscent, and pollen grains were discharged into two tubes. Pollen was mature tetrad type without being separated after meiosis (Late March). The number of pollen granules per anther was 400~1,300, the germination rate was higher in the cultivars having many pollen grains. Pistil was composed of five carpels and a shipper without separate part. The number of ovules per ovary was 39~67, therefore, the coefficient of ranged from 11.6 to 31.0%. The seed pod formation by combination of ‘Bluejay’ and ‘Sharpblue’ was higher in the cross-pollination than in the self-pollination.

• Structural Engineering and Mechanics
• /
• v.78 no.3
• /
• pp.231-253
• /
• 2021

Pure bending loading conditions are not frequently occurred in practical engineering, but the flexural researches are important since it's the basis of mechanical property researches under complex loading. Hence, the objective of this paper is to investigate the flexural behavior of concrete-filled rectangular steel tube (CFRT) through combined experimental and numerical studies. Flexural tests were conducted to investigate the mechanical performance of CFRT under bending. The load vs. deflection curves during the loading process was analyzed in detail. All the specimens behaved in a very ductile manner. Besides, based on the experimental result, the composite action between the steel tube and core concrete was studies and examined. Furthermore, the feasibility and accuracy of the numerical method was verified by comparing the computed results with experimental observations. The full curves analysis on the moment vs. curvature curves was further conducted, where the development of the stress and strain redistribution in the steel tube and core concrete was clarified comprehensively. It should be noted that there existed bond slip between the core concrete and steel tube during the loading process. And then, an extensive parametric study, including the steel strength, concrete strength, steel ratio and aspect ratio, was performed. Finally, design formula to calculate the ultimate moment and flexural stiffness of CFRTs were presented. The predicted results showed satisfactory agreement with the experimental and FE results. Additionally, the difference between the experimental/FE and predicted results using the related design codes were illustrated.

• Cross-Cultural Studies
• /
• v.33
• /
• pp.241-262
• /
• 2013

Nietzsche in the early 20th century, many Western thought came to China pushed the time, who want to reform the Chinese young intellectuals was a great welcome. Around 5.4 times writers representing China Journalism Guo Mo ruo Mao Dun and social needs of the times according to the spirit, according to their ideology, no tubes and four optional understand Nietzsche. Was acceptable, in the process, Nietzsche was transformed hem into various forms. In this paper, two Guo Mo ruo Mao Dun accept Nietzsche as Nietzsche socreated their own awards and also looked at these similarities and difference. Nietzsche Guo Mo ruo the remnants of the old feudal ideas and traditions were to break down and accept only select perspective. Nietzsche's self-discovery and individual liberty, and against the reality and accept the terms of loan 5.4 seconds, an ideal Nietzsche award was created. However Guo Mo ruo particular aspect of the acceptance of Nietzsche, whereas Nietzsche regarded as an extreme pessimist history, and his extreme caution and idealistic form of individualism was often criticized. Mao Dun the core ideas of Nietzsche 'Superman' and 'will power' noted. 5.4 All time view of life, a new morality must re-evaluate the need for a practical, based on the old tradition of Nietzsche completely against the spirit of rebellion was to have especially appreciated. But this was different Mao Dun Nietzsche and moral beliefs. What is the old morality Nietzsche corrupt, bourgeois morality and ethics, and was negative for democracy and freedom, Mao Dun dark realities facing the old Chinese feudal and traditional idea ofrevolution as a democrat were negative for. Guo Mo ruo Mao Dun optional for Nietzsche's acceptance was 5.4 times that contemporary needs can be met.

• Structural Engineering and Mechanics
• /
• v.69 no.6
• /
• pp.627-635
• /
• 2019

In order to study the axial compression performance of sand-lightweight concrete-filled steel tube (SLCFST) stub columns, three circular SLCFST (C-SLCFST) stub column specimens and three SLCFST square (S-SLCFST) stub column specimens were fabricated and static monotonic axial compression performance testing was carried out, using the volume ratio between river sand and ceramic sand in sand-lightweight concrete (SLC) as a varying parameter. The stress process and failure mode of the specimens were observed, stress-strain curves were obtained and analysed for the specimens, and the ultimate bearing capacity of SLCFST stub column specimens was calculated based on unified strength theory, limit equilibrium theory and superposition theory. The results show that the outer steel tubes of SLCFST stub columns buckled outward, core SLC was crushed, and the damage to the upper parts of the S-SLCFST stub columns was more serious than for C-SLCFST stub columns. Three stages can be identified in the stress-strain curves of SLCFST stub columns: an elastic stage, an elastic-plastic stage and a plastic stage. It is suggested that AIJ-1997, CECS 159:2004 or AIJ-1997, based on superposition theory, can be used to design the ultimate bearing capacity under axial compression for C-SLCFST and S-SLCFST stub columns; for varying replacement ratios of natural river sand, the calculated stress-strain curves for SLCFST stub columns under axial compression show good fitting to the test measure curves.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.5
• /
• pp.45-51
• /
• 2018

Roll forming refers to the production of long plate-molded products, such as panels, pipes, tubes, channels, and frames, by continuously causing the bending deformation to thin plates using rotating rolls. As the roll forming method has advantages in terms of mass production because of its excellent productivity, the size of the roll forming industry has been continuously increasing and the roll forming method is increasingly being used in diverse industrial fields as a very important processing method. Furthermore, as the roll forming method mainly depends on the continuous bending deformation of the plate materials, the time and the cost of the heterogeneous materials developed in the process are relatively large when considered from the viewpoint of plastic working because many processes are continuously implemented. The existing studies on roll forming manufacturing have reported the loss of large amounts of time and materials when the raw materials or product types were changed; further, they have stated that the use of this method can hardly guarantee the uniformity of the formed shapes and the consistency in terms of size and cannot detect all the defects occurring during the mass production and related to the dimensions. Therefore, in this research, a real-time process data-based smart roll forming method that can be applied to multiple products was studied. As a result, a roll forming system was implemented that remembers and automatically sets the changes in the finely adjusted values of the supplied quantities of individual heterogeneous materials so that the equipment setting changing time for heterogeneous material replacements or changes in the products being produced can be shortened. It also secures the uniformity of the products so that more competitive and precise slide-rail products can be mass-produced with improvements in the quality, price, and productivity of the products.

• International Journal of Advanced Culture Technology
• /
• v.7 no.2
• /
• pp.28-33
• /
• 2019

Electronic health records (EHRs) enable us to use and re-use electronic data for various multiple purposes, such as public reporting, quality improvement, and patient outcomes research. Current hospital-acquired pressure injury (HAPI) risk assessment instruments have not been specifically developed for intensive care unit (ICU) patients and showed false positive rates in this specific populations. Previous research studies report a number of risk factors; however, it is still not clear what factors influence ICU HAPI in this population. As part of a larger research study, we performed an exploratory analysis by using a large electronic health record data. The aims of this study were to compare characteristics of patients who developed HAPIs during their ICU stay with those who did not, and to determine whether the two groups were different in the aspects of length of ICU stay, discharge disposition, and discharge destinations. We conducted chi-square test and t-test for group comparison. Association was examined by using bivariate analyses. Pearson correlation coefficients were used to examine correlation between LOS and number of medications. Our findings suggest a number of consistent and potentially modifiable risk factors, such as sedation, feeding tubes, and the number of medications administered. The mortality of the HAPI group was significantly higher than the non-HAPI group in our data. Discharge disposition was significantly different between the groups. 67% of the HAPI group transferred to intermediate or long-term care hospitals whereas 57.7% of the non-HAPI group went home after discharge. Awareness of these risk factors can lead to clinical interventions that can be preventative in the ICU setting.

• Korean Chemical Engineering Research
• /
• v.57 no.1
• /
• pp.28-41
• /
• 2019

We carried out performance analysis of Sodium-Water Reaction Pressure Relief System of Prototype Generation-IV Sodium-Cooled Fast Reactor. We analyzed transient-dynamic behavior of fluids inside the steam generator to vent into a sodium dump tank or a water dump tank when tubes in the steam generator were broken to cause a large-water-leak accident. Accordingly, we preliminarily evaluated design requirements of our system. Our results showed that sodium in the shell side of the steam generator and in Intermediate Heat Transport System was completely vented within 50 s and feed water in the tube side of the steam generator was completely vented within 2.5 s. It was analyzed that pressure of the tube side of the steam generator was higher than pressure of the shell side of the steam generator, which showed that sodium in the shell side did not flow into the tube side. Our results are expected to be used as basis information to performance analysis of Sodium-Water Reaction Pressure Relief System of Prototype Generation-IV Sodium-Cooled Fast Reactor.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.22 no.2
• /
• pp.132-141
• /
• 2019

Foreign body (FB) ingestion of children is a common pediatric emergency requiring medical attention. Pediatric emergency physicians and gastroenterologists often encounter nervous and distressed situations, because of children presenting with this condition in the common clinical practice. When determining the appropriate timing and indications for intervention, physicians should consider multiple patient- and FB-related factors. The utilization of a flexible endoscopy is considered safe and effective to use in these cases, with a high success rate, for the effective extraction of FBs from the gastrointestinal tract of a child. Additionally, a Foley catheter and a magnet-attached Levin tube have been used for decades in the case of FB removal. Although their use has decreased significantly in recent times, these instruments continue to be used for several indications. Using a Foley catheter for this purpose does not require special training and does not necessarily require sedation of the patient or fluoroscopy, which serve as advantages of utilizing this method for foreign object retrieval. An ingested magnet or iron-containing FB can be retrieved using a magnet-attached tube, and can be effective to retrieve an object from any section of the upper gastrointestinal tract that can be reached. Simple and inexpensive devices such as Foley catheters and magnetattached tubes can be used in emergencies such as with the esophageal impaction of disk batteries if endoscopy cannot be performed immediately (e.g., in rural areas and/or in patients presenting at midnight in a facility, especially in those without access to endoscopes or emergency services, or in any situation that warrants urgent removal of a foreign object).