• Asian Journal of Turfgrass Science
• /
• v.9 no.3
• /
• pp.173-185
• /
• 1995

Hydroseeding technique is a very popular method of revegetating slope areas through the control of soil erosion and stability by seeding grasses. This study was conducted to select turfgrass species and cultivars for hydroseeding. Experiment plots were established on various soil types and environmental conditions at Singar-Ansan high-way construction site. The investigation was designed in three cutting, one back-filling and other three spare sites with various seed mixtures. Results indicated that combinations of seed mixtures influenced seed germination and rates of surface cover. In a view of long term, vegetation shifts should be influenced by characters of slopes and micro-climate conditions. Hydroseeding did not show good results on rocky slope areas. Revegetation was only going on where there had soil. The combination of seed mixture with a higher rate of perennial ryegrass had relatively good revegetation with faster germination and seedling growth. Improved turf-type tall fescue Arid ⓡ and Falcon ⓡ seemed to have good environ-mental adaptation and drought tolerance. Wild or old type cultivars showed relatively slow green-up in spring and growth rates at the next year of seeding. For the harmonious landscaping with surrounding area, the combination of native grass mixture with cool-season grasses had good results. Slow and low revegetation rate at hack-filling site seemed to be caused by the poor development of capillary tubes in sub-soil. It was shown that a high correlation between seed germination and revegetation rate, and between three-month later coverage rate and final rate. The evaluation of coverage rate after three month seems to he acceptable to decide the accomplishment of hydroseeding results on rode side slopes.

• Steel and Composite Structures
• /
• v.19 no.2
• /
• pp.293-308
• /
• 2015

Interaction between the external thin-walled steel tube and the internal concrete core significantly increases the bending resistance of composite beams and beam-columns in comparison with the steel or concrete members. There is presented a developed method for design of hollow and solid concrete-filled steel tubular beams based on test data, which gives better agreement with test results than EC4 because its limitation to take an increase in strength of concrete caused by confinement contradicts the recommendation of 6.7.2(4) that full composite action up to failure may be assumed between steel and concrete components of the member. Good agreement between the results of carried out experimental, numerical and theoretical investigations allows recommending the proposed method to use in design practice.

• Structural Engineering and Mechanics
• /
• v.41 no.6
• /
• pp.805-822
• /
• 2012

Offshore pipelines have to withstand combined actions of tension and bending during deepwater installation, which can possibly lead to elliptical buckle and even catastrophic failure of whole pipeline. A 2D theoretical model initially proposed by Kyriakides and his co-workers which carried out buckling response analysis of elastic-plastic tubes under various load combinations, is further applied to investigate buckling behavior of offshore pipelines under combined tension and bending. In association with practical pipe-laying circumstances, two different types of loadings, i.e., bent over a rigid surface in the presence of tension, and bent freely in the presence of tension, are taken into account in present study. In order to verify the accuracy of the theoretical model, numerical simulations are implemented using a 3D finite element model within the framework of ABAQUS. Excellent agreement between the results validates the effectiveness of this theoretical method. Then, this theoretical model is used to study the effects of some important factors such as load type, loading path, geometric parameters and material properties etc. on buckling behavior of the pipes. Based upon parametric studies, a few significant conclusions are drawn, which offer a theoretical reference for design and installation monitoring of deepwater pipelines.

• Interaction and multiscale mechanics
• /
• v.5 no.2
• /
• pp.91-104
• /
• 2012

There is relatively little numerical study on the behavior of eccentrically loaded high strength rectangular concrete-filled steel tubular (CFST) slender beam-columns with large depth-to-thickness ratios, which may undergo local and global buckling. This paper presents a multiscale numerical model for simulating the interaction local and global buckling behavior of high strength thin-walled rectangular CFST slender beam-columns under eccentric loading. The effects of progressive local buckling are taken into account in the mesoscale model based on fiber element formulations. Computational algorithms based on the M$\ddot{u}$ller's method are developed to obtain complete load-deflection responses of CFST slender beam-columns at the macroscale level. Performance indices are proposed to quantify the performance of CFST slender beam-columns. The accuracy of the multiscale numerical model is examined by comparisons of computer solutions with existing experimental results. The numerical model is utilized to investigate the effects of concrete compressive strength, depth-to-thickness ratio, loading eccentricity ratio and column slenderness ratio on the performance indices. The multiscale numerical model is shown to be accurate and efficient for predicting the interaction buckling behavior of high strength thin-walled CFST slender beam-columns.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.1107-1112
• /
• 2006

The purpose of this study is a heat transfer coefficient test of evaporator tube in shell and tube heat exchanger by shapes, using R-404A. The experimental apparatus is designed to simulate the real heat transfer rate in one shell and tube heat exchanger. The test section is formed four type tubes that are Inner ridged tube, Corrugated tube, Turbo-C tube, Inner fin tube and shell type is formed by electrical heater. All tests were performed at a fixed refrigerant evaporator temperature at $1.5^{\circ}C,\;-3^{\circ}C$ and with mass fluxes of 29, 25 kg/hr. Heat transfer rate is calculated a enthalpy difference in test section. In experiment, heat transfer coefficient measured one by one and electrical heaters are supplemented by evaporator.

• Korean Journal of Bronchoesophagology
• /
• v.4 no.1
• /
• pp.27-34
• /
• 1998

Despite improvement in respiratory care, including use of low pressure and high volume cuffed tubes, tracheal stenosis remains a serious complication after a long-term tracheal intubation and tracheostomy. In such patients, tracheal resection and primary anastomosis is still considered ideal therapeutic modality. Between 1989 and 1997, we performed tracheal resections with end-to-end anastomosis on 14 patients with no operative mortality and some morbidity. Tracheal stenosis was caused by tracheostomy in nine patients, by endotracheal intubation in three patients and by thyroid carcinoma in two patients. The length of stenosis was various from 2cm to 4.5cm. All patient underwent segmental tracheal resection and primary anastomosis(14 patients) and additional procedures were cricoid cartilage reconstruction(2 patients), suprahyoid laryngeal release(3patients), carinal release technique(2 patients) and arytenoidectomy(2 patients). We have nine complications: granulona at anastomosis site in four patients, vocal cord palsy in two patients and restenosis, pneumonia, skin necrosis in each of those patients. The granuloma was removed by bronchoscopic forceps(4 patients). Vocal cord palsy was treated by arytenoidectorny(2 patients), restenosis by T-tube insertion, pneumonia by antibiotics and skin necrosis was treated by skin graft. We reviews our expenence of clinical features of tracheal stenosis and surgical treatment by tracheal one-to-end anastomosis with additional procedures to avoid postoperative complications for sucessful results.

• Korean Journal of Bronchoesophagology
• /
• v.4 no.1
• /
• pp.35-42
• /
• 1998

The complications of a tracheotomy are caused by inappropriate surgical techniques, unsuitable cannula selections, and improper wound care. Among these, the solutions to problems of surgical technique and wound care have been reported in many articles. Detailed methods for preventing complications by the cannula are rare. The authors tried to find a way of preventing complications by the cannula Materials and Methods : The authors analized complications in 70 patients who had a temporary tracheotomy and were wearing a cannula. And the complications were compared between 4 commercial cannulas used in our institute. The examination methods used were a simple neck lateral radiogram and flexible endoscopy. Results： The order of most commonly found complications were as followed; at the suprastoma, end of cannula, level of tracheotomy, and infrastoma. Among 4 cannulas, a particular product had so many complications compared to the other 3 cannulas. The most common cause of complications was unsuitable cannula. All complications were cured with no sequelae. Flexible endoscopy is far superior to radiologic exam for detecting tracheal complications. Conclusion： Flexible endoscopy through the tracheostoma is very helpful for detecting complications early and determining if a proper cannula is used, which can prevent further complications such as stenosis or innominate artery rupture. The authors, therfore, recommend using the flexible endoscopy to all patients wearing tracheotomy tubes. Some complications can simply be prevented by replacing the one to another cannula properly fit for the individual patients. Various cannulas should be prepared at the hospital because the tracheal curvature and distance of skin to trachea are individualized.

• Macromolecular Research
• /
• v.16 no.3
• /
• pp.261-266
• /
• 2008

A variety of end-functionalized polymers were grafted spontaneously onto multi-walled carbon nano-tubes (MWNTs) using a solution mixing process. The end-functional groups of the polymers underwent noncovalent grafting to the defect sites at the surface of the purified MWNTs through zwitterionic interaction or hydrogen bonding. The physically grafted polymers including polystyrene (PS), poly(methyl methacrylate) (PMMA), polyethylene oxide (PEO), and polydimethylsiloxane (PDMS) provided sufficient compatibility with an organic solvent or polymer matrix, such that the nanotubes could be finely dispersed in various organic media. This approach is universally applicable to a broad range of polymer-solvent pairs, ensuring highly dispersed carbon nanotubes through simple solution mixing.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.17 no.4
• /
• pp.456-465
• /
• 1988

The performance of the cold latent heat storage is investigated by experiment and by a simplified analytic approach. The heat storage tank has eight horizontal circular tubes and one path of refrigerant evaporating tube. The phase change material in the heat storage tank is water which is frozen by evaporating refrigerant of refrigeration system and melts by the warm air in the heat storage tank. In the experiment, the performance has been studied by the various conditions including the initial water temperature on solidification and flow rate and temperature of air. The rate of recovered heat has been simulated by a simplified model and the results shows a good agreement. In solidification process, initial water temperature causes time delay corresponding to the sensible heat and it is found that the shape of evaporator is important. In melting process, the recovered heat rate from the heat storage tank is proportional to $Re^{0.8}(T_{bi}-T_f)$ of air where $T_{bi}$ and $T_f$ indicate temperatures of inlet air and phase change, respectively. And the deminishing rate of the recovered heat is higher for the higher heat rate.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.17 no.3
• /
• pp.81-87
• /
• 2009

The effect of oil on convective boiling of R-123 in an enhanced tube bundle is experimentally investigated at $26.7^{\circ}C$ saturation temperature. The enhanced tube had pores (0.23 mm diameter) and connecting gaps (0.07 mm width), which had been optimized using pure R-123. The effects of oil concentration (0 to 5%), heat flux (10 to $40\;kW/m^2$), mass velocity (8 to $26\;kg/m2^s$) and vapor quality are investigated. The oil significantly reduces the bundle boiling heat transfer coefficient. With 1% oil, the reduction is approximately 35%. Further addition of oil further reduces the heat transfer coefficient. The data are also compared with the pool boiling counterpart. The reduction in the heat transfer coefficient is smaller in a bundle (convective boiling) than in a pool (single-tube pool boiling), with larger difference at a smaller heat flux. Similar to pure R-123 case, the effects of mass velocity and vapor quality are negligible for the convective boiling of R-123/oil mixture.